Issue 21, 2022

Novel ratiometric electrochemical sensing platform for uric acid based on electroactive cuprous oxide nanocubes combined with boron carbide

Abstract

Electrochemically active oxides play important roles in the fabrication of electrochemical sensing platforms, in which they can be utilized as electrochemical probes or catalysts in electrochemical reactions. Herein, a novel ratiometric electrochemical sensor for uric acid (UA) was developed based on the newly synthesized Cu2O nanocubes with good electrochemical activity combined with boron carbide (B4C) with excellent conductivity. The oxidation peak of Cu2O remained unchanged, which could be used as a reference, while the oxidation peak of UA catalyzed by the modified electrode increased with the concentration of UA. The two signals displayed a large peak-to-peak potential and thus a ratiometric electrochemical sensor for UA was established, which could further reduce the effects of unrelated factors, such as the environment influence. The sensor exhibited good linear ranges of 0.1–100 μM and 100–1000 μM, and showed good sensitivity, selectivity, repeatability, and stability. The sensor was successfully applied in the detection of UA in complex human serum and urine samples.

Graphical abstract: Novel ratiometric electrochemical sensing platform for uric acid based on electroactive cuprous oxide nanocubes combined with boron carbide

Supplementary files

Article information

Article type
Paper
Submitted
03 اگست 2022
Accepted
20 ستمبر 2022
First published
24 ستمبر 2022

Analyst, 2022,147, 4777-4785

Novel ratiometric electrochemical sensing platform for uric acid based on electroactive cuprous oxide nanocubes combined with boron carbide

D. Cheng, X. Liu, P. Li, Y. Zhang, M. Liu and S. Yao, Analyst, 2022, 147, 4777 DOI: 10.1039/D2AN01270G

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements