Issue 1, 2021

A highly efficient and thermally stable broadband Cr3+-activated double borate phosphor for near-infrared light-emitting diodes

Abstract

Highly efficient and thermally stable broadband near-infrared (NIR) phosphors are urgently required for phosphor-converted light-emitting diodes (pc-LEDs), which are compact, low cost and promising for applications such as food analysis and agricultural science. Herein, a NIR phosphor, GdAl3(BO3)4:Cr3+ (GAB:Cr3+), with high emission efficiency and excellent thermal stability is presented. Under blue light excitation, GAB:Cr3+ shows a broad emission band covering 650–1000 nm with a full width at half maximum of ∼140 nm. Particularly, the 1.0 at% Cr3+ doped sample exhibits a photoluminescence (PL) quantum yield as high as 91%, and no decline of the PL intensity is observed even when the temperature is raised from 298 to 423 K. By combining the GAB:Cr3+ phosphor with a commercial blue LED chip, a high-performance NIR pc-LED is fabricated with a NIR radiant flux of 81 mW under a drive current of 350 mA. Furthermore, an aging test was performed on this device at 85 °C and 85% humidity for 480 h, and the radiant flux retained up to 95% of its initial value, which is comparable to the commercial phosphors. These results suggest that GAB:Cr3+ is a promising candidate for broadband pc-LEDs in NIR spectroscopy applications.

Graphical abstract: A highly efficient and thermally stable broadband Cr3+-activated double borate phosphor for near-infrared light-emitting diodes

Supplementary files

Article information

Article type
Paper
Submitted
10 اکتوٗبر 2020
Accepted
09 نومبر 2020
First published
10 نومبر 2020

J. Mater. Chem. C, 2021,9, 164-172

A highly efficient and thermally stable broadband Cr3+-activated double borate phosphor for near-infrared light-emitting diodes

D. Huang, H. Zhu, Z. Deng, H. Yang, J. Hu, S. Liang, D. Chen, E. Ma and W. Guo, J. Mater. Chem. C, 2021, 9, 164 DOI: 10.1039/D0TC04803H

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements