Issue 6, 2017

An ICP-MS-based platform for release studies on silver-based nanomaterials

Abstract

Engineered nanoparticles are being incorporated into different products and nanocomposites. The release of these nanoparticles, as well as other derived species, can subsequently lead to consumer and environmental exposure, being a relevant factor for risk assessment. The need for analytical methods for the detection, characterization and quantitation of these released species under relevant conditions becomes evident. In this work, a platform of methods based on the use of inductively coupled plasma mass spectrometry (ICP-MS) is proposed to obtain information about the release of silver from silver based nanocoatings and nanocomposites. The sensitivity and element specific response of conventional ICP-MS is complemented by the use of the technique in single particle mode and in combination with ultrafiltration and asymmetrical flow field flow fractionation. By using these three methods, information about the release of both dissolved and particulate forms of silver, as well as the size of the nanoparticles, can be obtained under a variety of scenarios at concentrations down to 0.1 μg L−1 and a nanoparticle diameter of 5 nm. The feasibility of the platform was checked through a number of paradigmatic cases.

Graphical abstract: An ICP-MS-based platform for release studies on silver-based nanomaterials

Article information

Article type
Paper
Submitted
13 فرؤری 2017
Accepted
20 اپریل 2017
First published
20 اپریل 2017

J. Anal. At. Spectrom., 2017,32, 1101-1108

An ICP-MS-based platform for release studies on silver-based nanomaterials

I. Abad-Alvaro, E. Bolea, F. Laborda and J. R. Castillo, J. Anal. At. Spectrom., 2017, 32, 1101 DOI: 10.1039/C7JA00059F

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements