Electrochemical sensing and catalysis using Cu3(BTC)2 coating electrodes from Cu(OH)2 films

Kenji Okada; Shota Sawai; Ken Ikigaki; Yasuaki Tokudome; Paolo Falcaro; Masahide Takahashi

doi:10.1039/C7CE00416H

You do not have JavaScript enabled. Please enable JavaScript to access the full features of the site or access our non-JavaScript page.

Electrochemical sensing and catalysis using Cu₃(BTC)₂ coating electrodes from Cu(OH)₂ films†

Kenji Okada,^a Shota Sawai,^b Ken Ikigaki,^b Yasuaki Tokudome,^b Paolo Falcaro^c and Masahide Takahashi

*^b

Author affiliations

* Corresponding authors

^a Department of Applied Chemistry, Graduate School of Engineering, Osaka University, Suita, Osaka 565-0871, Japan

^b Department of Materials Science, Graduate School of Engineering, Osaka Prefecture University, 1-1 Gakuen-cho, Naka-ku, Sakai, Osaka 599-8531, Japan
E-mail: masa@photomater.com

^c Graz University of Technology, Institute of Physical and Theoretical Chemistry, Stremayrgasse 9/Z2, 8010 Graz, Austria

Abstract

Metal–organic framework (MOF) coatings were prepared on gold electrodes through the conversion from Cu(OH)₂ nanobelts to Cu₃(BTC)₂ MOFs (BTC = 1,3,5-benzenetricarboxylic acid). In the conversion from Cu(OH)₂ to Cu₃(BTC)₂, the porosity and homogeneity of the coatings are tunable by controlling the EtOH : H₂O volume ratio of the MOF precursor solution. The kinetics and mechanism of the conversion from metal hydroxide nanobelts to MOFs were investigated by using the quartz crystal microbalance (QCM) technique. The Cu₃(BTC)₂ coatings were finally tested for the size-selective electrochemical sensing and non-enzymatic electrocatalysis of glucose.

This article is part of the themed collection: Metal-Organic Framework Catalysis

Download options Please wait...

Supplementary files

Supplementary information PDF (699K)

Article information

DOI: https://doi.org/10.1039/C7CE00416H
Article type: Paper
Submitted: 28 فرؤری 2017
Accepted: 10 اپریل 2017
First published: 10 اپریل 2017

Download Citation

CrystEngComm, 2017,19, 4194-4200

Permissions

Request permissions

Electrochemical sensing and catalysis using Cu₃(BTC)₂ coating electrodes from Cu(OH)₂ films

K. Okada, S. Sawai, K. Ikigaki, Y. Tokudome, P. Falcaro and M. Takahashi, CrystEngComm, 2017, 19, 4194 DOI: 10.1039/C7CE00416H

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Social activity

Fetching data from CrossRef.
This may take some time to load.

CrystEngComm