Issue 3, 2016

Boosting the performance of planar heterojunction perovskite solar cell by controlling the precursor purity of perovskite materials

Abstract

Perovskite solar cells (PSCs) have received great attention due to their high power conversion efficiency and low fabrication cost. The perovskite layer is usually prepared from a solution of precursors. We found that the PbI2 purity has a significant effect on the crystallinity, charge carrier dynamics, and photovoltaic properties of the perovskite films. Planar heterojunction PSCs using highly pure PbI2 showed a high power conversion efficiency (PCE) of 16.4%, which was higher than that of control PSCs with low purity PbI2 by 30–40%. Steady-state photoluminescence (PL), time-resolved PL (TR-PL) and femtosecond transient absorption measurements (FS-TA) revealed that impurities can lower the electron lifetime and increase the non-radiative recombination. This study implies that the PCEs of the perovskite solar cell devices could be further boosted by controlling the precursor purity.

Graphical abstract: Boosting the performance of planar heterojunction perovskite solar cell by controlling the precursor purity of perovskite materials

Supplementary files

Article information

Article type
Paper
Submitted
20 اکتوٗبر 2015
Accepted
28 نومبر 2015
First published
01 دسمبر 2015

J. Mater. Chem. A, 2016,4, 887-893

Boosting the performance of planar heterojunction perovskite solar cell by controlling the precursor purity of perovskite materials

J. Chang, H. Zhu, B. Li, F. H. Isikgor, Y. Hao, Q. Xu and J. Ouyang, J. Mater. Chem. A, 2016, 4, 887 DOI: 10.1039/C5TA08398B

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements