Issue 9, 2016

Multicompartment morphologies self-assembled from fluorinated ABC triblock terpolymers: the effects of flexible and rigid hydrophobic moieties

Abstract

This paper is aimed at comparing the effects of flexible and rigid blocks on the morphologies of multicompartment aggregates self-assembled from two kinds of fluorinated ABC triblock terpolymers, in which polyisobutylene (PIB) with a low glass transition temperature (Tg ∼ −67 °C) and polystyrene (PS) with high Tg (∼100 °C) were selected as the flexible and rigid blocks, respectively. The fluorinated triblock terpolymers (abbreviated as PIB-b-PDMAEMA-b-POFPMA and PS-b-PDMAEMA-b-POFPMA, respectively) with similar relative block lengths were synthesized via consecutive oxyanion-initiated polymerization (OIP) of 2-N,N-(dimethylamino)ethyl methacrylate (DMAEMA) and 2,2,3,3,4,4,5,5-octafluoropentyl methacrylate (OFPMA) using pre-functionalized PIB-OK+ or PS-OK+ as the macroinitiators. These terpolymers could self-assemble in aqueous solution since the PDMAEMA block is hydrophilic, PIB and PS blocks are hydrophobic, while the POFPMA block is both hydrophobic and lipophobic. The self-assembly behavior was analyzed by transmission electron microscopy (TEM). It has been demonstrated that PIB-b-PDMAEMA-b-POFPMA with the flexible PIB block could self-assemble into four types of reproducible nanostructures with the increase of polymer concentrations, including multicompartment micelles, fiber-like aggregates, nanotubules and rod-like aggregates. More interestingly, a uniform zig-zag pattern was observed on the surface of these rod-like aggregates after the solution was maintained without stirring for one week. In contrast, for the PS-b-PDMAEMA-b-POFPMA system containing a rigid PS block, the similar morphologies were rarely observed, except for spherical, hamburger and flower-like multicompartment nanostructures. The present work reveals that the flexibility or rigidity of the hydrophobic segment as well as the polymer concentration exerts a big influence on both the self-assembly behavior and formation of diversified morphologies.

Graphical abstract: Multicompartment morphologies self-assembled from fluorinated ABC triblock terpolymers: the effects of flexible and rigid hydrophobic moieties

Supplementary files

Article information

Article type
Paper
Submitted
17 دسمبر 2015
Accepted
18 جنؤری 2016
First published
21 جنؤری 2016

Polym. Chem., 2016,7, 1773-1781

Multicompartment morphologies self-assembled from fluorinated ABC triblock terpolymers: the effects of flexible and rigid hydrophobic moieties

S. Li, J. He, M. Zhang, H. Wang and P. Ni, Polym. Chem., 2016, 7, 1773 DOI: 10.1039/C5PY02017D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements