Issue 28, 2014

Improved performance of p–n junction-based ZnO nanogenerators through CuSCN-passivation of ZnO nanorods

Abstract

Self-powered piezoelectric systems are vital components to harvest ambient waste energy for applications such as autonomous self-powered sensors. ZnO nanorod-based devices are gaining wide attention for energy harvesters as they are easily synthesized at low temperature onto a range of substrates. However, losses related to screening of piezoelectric polarisation charges by free carriers in ZnO nanorods can significantly reduce the output of these devices. This paper reports using copper thiocyanate (CuSCN) to reduce ZnO surface-state-induced parasitic losses and improve power density of ZnO nanorod-based energy harvesters by a factor of 10. The surface modified energy harvester generated 1.07 V as an instantaneous peak open circuit voltage giving a maximum calculated 434 μW cm−2 peak power density associated with release at an acceleration of 50 g. Impedance analysis determined that the device RC time constant (τRC), correlated with device peak voltage, demonstrating a relationship between the screening effects in ZnO and τRC.

Graphical abstract: Improved performance of p–n junction-based ZnO nanogenerators through CuSCN-passivation of ZnO nanorods

Supplementary files

Article information

Article type
Paper
Submitted
08 اپریل 2014
Accepted
08 میٔ 2014
First published
08 میٔ 2014

J. Mater. Chem. A, 2014,2, 10945-10951

Improved performance of p–n junction-based ZnO nanogenerators through CuSCN-passivation of ZnO nanorods

N. Jalali, P. Woolliams, M. Stewart, P. M. Weaver, M. G. Cain, S. Dunn and J. Briscoe, J. Mater. Chem. A, 2014, 2, 10945 DOI: 10.1039/C4TA01714E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements