Issue 9, 2011

Phaseguides: a paradigm shift in microfluidic priming and emptying

Abstract

Phaseguide technology gives complete control over filling and emptying of any type of microfluidic structures, independent of the chamber and channel geometry. The technique is based on a step-wise advancement of the liquid–air interface using the meniscus pinning effect. In this paper, the main effects and parameters underlying the phaseguiding principle are discussed and a demonstration is given of its potential for dead angle filling, spatially controlled phaseguide overflow and sequential phaseguide overflow, all accumulating in a passive valving approach. Phaseguides represent a new direction in microfluidic design thinking that will prove a leap forward towards more simple, flexible and reliable microfluidic systems.

Graphical abstract: Phaseguides: a paradigm shift in microfluidic priming and emptying

Supplementary files

Article information

Article type
Paper
Submitted
29 نومبر 2010
Accepted
16 فرؤری 2011
First published
10 مارٕچ 2011

Lab Chip, 2011,11, 1596-1602

Phaseguides: a paradigm shift in microfluidic priming and emptying

P. Vulto, S. Podszun, P. Meyer, C. Hermann, A. Manz and G. A. Urban, Lab Chip, 2011, 11, 1596 DOI: 10.1039/C0LC00643B

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements