Volume 243, 2023

Structural evolution of TiN catalysts during mechanocatalytic ammonia synthesis

Abstract

Mechanocatalytic ammonia synthesis is a novel approach toward ammonia synthesis under mild conditions. However, many open questions remain about the mechanism of mechanocatalytic ammonia synthesis, as well as the structure of the active catalysts during milling. Herein, the structural evolution of an in situ synthesized titanium nitride catalyst is explored during extended milling. The yield of ammonia bound to the catalyst surface was found to strongly correlate with an increase in catalyst surface area during milling, although a lower surface concentration of ammonia at earlier milling times suggests a delay in ammonia formation, corresponding to the conversion of the titanium metal pre-catalyst into the nitride. Small pores develop in the catalyst during milling due to interstitial spaces between agglomerated titanium nitride nanoparticles, as shown by SEM and TEM. In the first 6 h, the titanium is both converted to a nitride and fractured to smaller particles, before an equilibrium state is reached. After 18 h of milling, the catalyst nanoparticles appear to crystallize into a denser material, resulting in a loss of surface area and pore volume.

Graphical abstract: Structural evolution of TiN catalysts during mechanocatalytic ammonia synthesis

Associated articles

Article information

Article type
Paper
Submitted
21 نومبر 2022
Accepted
08 دسمبر 2022
First published
08 دسمبر 2022

Faraday Discuss., 2023,243, 65-76

Author version available

Structural evolution of TiN catalysts during mechanocatalytic ammonia synthesis

J. A. DeWitt, Erin V. Phillips, K. L. Hebisch, A. W. Tricker and C. Sievers, Faraday Discuss., 2023, 243, 65 DOI: 10.1039/D2FD00164K

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements