Volume 226, 2021

Simulation of primary and secondary particles in the streets of Paris using MUNICH

Abstract

High particle concentrations are observed in the streets. Regional-scale chemistry-transport models are not able to reproduce these high concentrations, because their spatial resolution is not fine enough. Local-scale models are usually employed to simulate the high concentrations in street networks, but they often adopt substantial simplifications to determine background concentrations and use simplified chemistry. This study presents the new version of the local-scale Model of Urban Network of Intersecting Canyons and Highways (MUNICH) that integrates background concentrations simulated by the regional-scale chemistry-transport model Polair3D, and uses the same complex chemistry module as Polair3D, SSH-aerosol, to represent secondary aerosol formation. Gas and aerosol concentrations in Paris streets are simulated with MUNICH, considering a street-network with more than 3800 street segments, between 3 May and 30 June. Comparisons with PM10 and PM2.5 measurements at several locations of Paris show that the high PM10 and PM2.5 concentrations are well represented. Furthermore, the simulated chemical composition of fine particles corresponds well to a yearly measured composition. To understand the influence of the secondary pollutant formation, several sensitivity simulations are conducted. Simulations with and without gas-phase chemistry show that the influence of gas-phase chemistry on the formation of NO2 is large (37% on average over May and across all modelled streets), but the influence on condensables is lower (less than 2% to 3% on average at noon for inorganics and organics), but may reach more than 20% depending on the street. The assumption used to compute gas/particle mass transfer by condensation/evaporation is important for inorganic and organic compounds of particles, as using the thermodynamic equilibrium assumption leads to an overestimation of the organic concentrations by 4.7% on average (up to 31% at noon depending on the streets). Ammonia emissions from traffic lead to an increase in inorganic concentrations by 3% on average, reaching 26% depending on the street segments. Not taking into account gas-phase chemistry and aerosol dynamics in the modelling leads to an underestimation of organic concentrations by about 11% on average over the streets and time, but this underestimation may reach 51% depending on the streets and the time of the day.

Graphical abstract: Simulation of primary and secondary particles in the streets of Paris using MUNICH

Associated articles

Article information

Article type
Paper
Submitted
08 جوٗلایی 2020
Accepted
08 ستمبر 2020
First published
09 ستمبر 2020

Faraday Discuss., 2021,226, 432-456

Simulation of primary and secondary particles in the streets of Paris using MUNICH

L. Lugon, K. Sartelet, Y. Kim, J. Vigneron and O. Chrétien, Faraday Discuss., 2021, 226, 432 DOI: 10.1039/D0FD00092B

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements