Issue 10, 2024

Sustainable synthesis of activated porous carbon from lignin for enhanced CO2 capture: a comparative study of physicochemical activation routes

Abstract

A sustainable and readily available material, lignin protobind 2400, was upcycled to activated porous carbon (APC) compatible with post-combustion CO2 capture. The effectiveness of the novel two-step physicochemical activation using KOH + CO2 and ZnCl2 + CO2 was compared with that of the respective physical (only CO2) and chemical activation (only KOH or ZnCl2). The effect of carbonization conditions (N2 or CO2 purging) on the resulting APC properties and CO2 adsorption performance was studied. The maximum BET surface area of 1480 m2 g−1 and the best CO2 adsorption capacity of 5.68, 3.66, and 2.67 mmol g−1 were observed at 0, 25, and 40 °C/1 bar, respectively. From the precursor to the final product, the APC yield falls within the range of 14.5–40.8 wt%. The APC derived from lignin exhibited better CO2/N2 selectivity. The isosteric heat of adsorption for all the APCs remained below 40 kJ mol−1, which suggested a lower energy requirement during the regeneration. The excellent reusability with fluctuations of only 0.51% in the amount of CO2 adsorbed over ten consecutive adsorption/desorption cycles highlights the APC's outstanding recyclability.

Graphical abstract: Sustainable synthesis of activated porous carbon from lignin for enhanced CO2 capture: a comparative study of physicochemical activation routes

Supplementary files

Article information

Article type
Paper
Submitted
14 May 2024
Accepted
17 Jul 2024
First published
30 Jul 2024
This article is Open Access
Creative Commons BY-NC license

Energy Adv., 2024,3, 2552-2563

Sustainable synthesis of activated porous carbon from lignin for enhanced CO2 capture: a comparative study of physicochemical activation routes

H. Patel, A. Mohanty and M. Misra, Energy Adv., 2024, 3, 2552 DOI: 10.1039/D4YA00305E

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements