Cross Reference Logo
Citations to this article as recorded by CrossRef and RSC Journals (192 citations).

Reversible B–O bond-based epoxy vitrimers with high thermomechanical and dynamic properties enhanced by intermolecular B–N coordination
Qi Li, Dong Wang, Tianjiao Wang, Yang Zhang, Shiyang Liu, Shiwei Zhang, Zhufeng Hu, Liying Li, Guoyong Wang and Yingmin Zhao
RSC Appl. Polym., 2025, 3, 1183
DOI: 10.1039/D5LP00144G

Lipidic biomass as a renewable chemical building block for polymeric materials
Rafael Turra Alarcon, Gabriel Iago dos Santos, Caroline Gaglieri, Aniele de Moura, Éder Tadeu Gomes Cavalheiro and Gilbert Bannach
Chem. Commun., 2024, 60, 14557
DOI: 10.1039/D4CC04993D

Poly(carbonate acetal) vitrimers with enhanced thermal properties and closed-loop thermal recyclability derived from waste polycarbonate-derived polyaldehyde and pentaerythritol/erythritol/d-sorbitol
Yi-Chun Chen, Kamani Sudhir K. Reddy, Ru-Jong Jeng and Ching-Hsuan Lin
Green Chem., 2024, 26, 10275
DOI: 10.1039/D4GC02934H

Vitrimeric electrolytes – overview and perspectives
Zviadi Katcharava, Anja Marinow and Wolfgang H. Binder
Chem. Commun., 2025, 61, 3250
DOI: 10.1039/D4CC05428H

Direct restoration of photocurable cross-linkers for repeated light-based 3D printing of covalent adaptable networks
Loc Tan Nguyen and Filip E. Du Prez
Mater. Horiz., 2024, 11, 6408
DOI: 10.1039/D4MH00823E

Unraveling the thermal stability of aromatic disulfide epoxy vitrimers: a comprehensive study using principal component analysis (PCA)
Paula Fanlo, Alaitz Ruiz de Luzuriaga, Gorka Albizu, Marta Ximenis, Alaitz Rekondo, Hans Jürgen Grande and Haritz Sardon
RSC Appl. Polym., 2024, 2, 826
DOI: 10.1039/D4LP00156G

Impact of nanofillers on vitrimerization and recycling strategies: a review
Sourav Ghosh, Amrita Chatterjee, Nilanjan Dey, Sunidhi Mishra, Shakshi Bhardwaj, Shiva Singh, Ujjal Tewary, Satyam Sahay, Madhuchhanda Maiti and Pradip K. Maji
Nanoscale Adv., 2025, 7, 5842
DOI: 10.1039/D5NA00183H

A review of epoxy vitrimer-based thermally conductive composites
Huimei Yao, Xuan Xu, Zipeng Chen, Kai Li, Tao Wang, Shenghua Pei, Jiaojiao Fu and Jiaxin Wang
RSC Adv., 2025, 15, 37908
DOI: 10.1039/D5RA05874K

Dynamic by design: unlocking full relaxation in disulfide epoxy networks
Paula Fanlo, Osman Konuray, Olaia Ochoteco, Marta Ximenis, Alaitz Rekondo, Hans Jürgen Grande, Xavier Fernández-Francos, Haritz Sardon and Alaitz Ruiz de Luzuriaga
Polym. Chem., 2025, 16, 2701
DOI: 10.1039/D5PY00124B

An effective approach for the preparation of epoxy vitrimers by in situ formation of dynamic and permanent linkages in a one-pot curing reaction
Du-Yuan Hung, Jia-Jun Lee and Ying-Ling Liu
Polym. Chem., 2023, 14, 5004
DOI: 10.1039/D3PY00957B

Latent catalysts in vitrimers
Nikita, Ashwani Kumar and Luke A. Connal
Polym. Chem., 2024, 15, 1932
DOI: 10.1039/D4PY00151F

Solvent-free preparation of imine vitrimers: leveraging benzoxazine crosslinking for melt processability and tunable mechanical performance
Levi J. Hamernik, William Guzman and Jeffrey S. Wiggins
J. Mater. Chem. A, 2023, 11, 20568
DOI: 10.1039/D3TA04351G

A combined computational and experimental study of metathesis and nucleophile-mediated exchange mechanisms in boronic ester-containing vitrimers
Jacopo Teotonico, Daniele Mantione, Laura Ballester-Bayarri, Marta Ximenis, Haritz Sardon, Nicholas Ballard and Fernando Ruipérez
Polym. Chem., 2024, 15, 181
DOI: 10.1039/D3PY01047C

Closed-loop recycling of bio-based disulfide vitrimer via a solvent-and waste-free strategy
Solène Guggari, Fiona Magliozzi, Samuel Malburet, Alain Graillot, Mathias Destarac and Marc Guerre
Green Chem., 2025, 27, 6392
DOI: 10.1039/D5GC01872B

Thermo-rheological and kinetic characterization and modeling of an epoxy vitrimer based on polyimine exchange
Niklas Lorenz, William E. Dyer and Baris Kumru
Soft Matter, 2024, 20, 6289
DOI: 10.1039/D4SM00724G

Synthesis, properties and biomedical perspective on vitrimers – challenges & opportunities
Gagandeep Kaur, Pawan Kumar and Christian Sonne
RSC Appl. Interfaces, 2024, 1, 846
DOI: 10.1039/D4LF00101J

The 3R (recycling, recovery, and reuse) of fiber reinforced thermoset composites: paving the way for a circular economy
Chinmoy Kuila, Animesh Maji, Naresh Chandra Murmu and Tapas Kuila
RSC Appl. Polym., 2026, 4, 30
DOI: 10.1039/D5LP00249D

Polybenzoxazine-based imine vitrimers for carbon fibre-reinforced composites: paving the way for recyclable high-performance materials
Gaurav Rai and Leena Nebhani
Polym. Chem., 2025, 16, 4322
DOI: 10.1039/D5PY00670H

The role of bio-based constituents in additive manufacturing with thermosetting polymers and vitrimers: a review
Eliott Bonnet Martin, Aurore Denneulin, Michael Lecourt, Mark Irle and Davide Beneventi
Mater. Adv., 2026, 7, 1918
DOI: 10.1039/D5MA00585J

Mechanistic insights into ortho-blocked and ortho-free vitrimeric polybenzoxazines incorporating dynamic Schiff linkages for closed-loop recyclability
Gaurav Rai and Leena Nebhani
Polym. Chem., 2024, 15, 4077
DOI: 10.1039/D4PY00776J

Fully bio-based acetal diepoxy monomer with high modulus, good thermal stability and readily degradability
Zidie Song, Li Liu, Pengbo Zhang, Kangle Xue, Zibo Hua, Tao You, Yiqi Wu, Hong Cui, Zhen Hu and Yudong Huang
Polym. Chem., 2024, 15, 4824
DOI: 10.1039/D4PY01038H

Bio-based vitrimers: chemistry, performance and applications
Edoardo Albertini, Sara Dalle Vacche and Alessandra Vitale
RSC Appl. Polym., 2026
DOI: 10.1039/D5LP00408J

Flexible and Stretchable Vitrimers for Sustainable Electronics
Agni K. Biswal, Peter Hong, Zhihan Zhang, Yiwen Zheng, Surabhit Gupta, Dhriti Nepal, Vikram Iyer and Aniruddh Vashisth
ACS Appl. Mater. Interfaces, 2025, 17, 9736
DOI: 10.1021/acsami.4c16995

Implementing recyclable bio- and CO2-sourced synergetic dynamic matrices via precise control of curing and properties for natural fiber composites within industrially relevant resin transfer molding
Guillem Seychal, Bernard Miranda Campos, Gabriel Perli, Vincent Placet, Bruno Grignard, Fanny Bonnet, Christophe Detrembleur, Haritz Sardon, Nora Aranburu and Jean-Marie Raquez
Chemical Engineering Journal, 2025, 511, 161506
DOI: 10.1016/j.cej.2025.161506

Multiple H‐Bonding Cross‐Linked Supramolecular Solid–Solid Phase Change Materials for Thermal Energy Storage and Management
Chenyang Wang, Xin Geng, Jing Chen, Hailong Wang, Zhengkai Wei, Bingxuan Huang, Wei Liu, Xiaodong Wu, Linyu Hu, Gehong Su, Jingxin Lei, Zhimeng Liu and Xin He
Advanced Materials, 2024, 36
DOI: 10.1002/adma.202309723

Towards sustainable reprocessable structural composites: Benzoxazines as biobased matrices for natural fibers
Guillem Seychal, Louis Van Renterghem, Connie Ocando, Leila Bonnaud and Jean-Marie Raquez
Composites Part B: Engineering, 2024, 272, 111201
DOI: 10.1016/j.compositesb.2024.111201

Catalyst-free epoxy vitrimers from phloroglucinol and glutaric anhydride for reusable-by-design biobased glass-fiber-reinforced composites
Giulia Altamura, Stefano Turri and Gianmarco Griffini
European Polymer Journal, 2026, 246, 114559
DOI: 10.1016/j.eurpolymj.2026.114559

Effect of laminae count and manufacturing methods on mechanical properties of thin‐ply woven composites
Shashank Kushwaha, Mahmoud A. Mahrous, Jacob L. Meyer, Charul Chadha and Iwona M. Jasiuk
Polymer Composites, 2025, 46, 6305
DOI: 10.1002/pc.29361

Renewable Resource-Based Epoxy Vitrimer Composites for Future Application: A Comprehensive Review
Sudheer Kumar, Sukhila Krishnan and K. Prabakaran
ACS Sustainable Resour. Manage., 2024, 1, 2086
DOI: 10.1021/acssusresmgt.4c00200

Current Status and Challenges of the Vitrimer Concept for Practical Applications
Mikihiro HAYASHI and Kota KITAMURA
Kobunshi, 2025, 74, 223
DOI: 10.1295/kobunshi.74.5_223

Synthesis of Magnetic Nanoparticle/Polymer Matrix Nanocomposites with Induced Magnetic Performance
Anastasios C. Patsidis, Aikaterini Sanida, Georgia C. Manika, Sevasti Gioti, Georgios N. Mathioudakis, Nicholas Petropoulos, Athanasios Kanapitsas, Christos Tsonos, Thanassis Speliotis and Georgios C. Psarras
Polymers, 2025, 17, 1913
DOI: 10.3390/polym17141913

Biobased and Reprocessable Vitrimers Based on Cardanol-Derived Epoxy for More Sustainable Thermosets
Edoardo Albertini, Sara Dalle Vacche, Roberta Bongiovanni, Isabella Bianco, Gian Andrea Blengini and Alessandra Vitale
ACS Sustainable Chem. Eng., 2025, 13, 2120
DOI: 10.1021/acssuschemeng.4c09035

The effect of graphene properties on the extrusion of a shape memory epoxy vitrimer
Yinglun Hong, Itxaso Azcune, Alaitz Rekondo and Eduardo Saiz
Materials & Design, 2024, 246, 113344
DOI: 10.1016/j.matdes.2024.113344

Conductive Liquid Metal Vitrimer Composites for Reconfigurable and Recyclable Flexible Electronics
Youngshang Han, Sargun Singh Rohewal, Sumit Gupta, Shreya Paul, Christopher C. Bowland and Mohammad H. Malakooti
Adv Funct Materials, 2025, 35
DOI: 10.1002/adfm.202511119

Dynamic Covalent Polymer Networks Based on Renewable Feedstocks: A Perspective on the Role of Vitrimers in a Closed-Loop Economy
Paul Morandi, Rudy Folkersma, Katja Loos and Vincent S. D. Voet
Biomacromolecules, 2026, 27, 1008
DOI: 10.1021/acs.biomac.5c01851

Joule heating and synthesis of transesterification vitrimer and epoxy system
Smita Shivraj Dasari, Sidney M. Cotton, Lou E. Arrambide, Shegufta T. Upama, Ethan M. Harkin, Sayyam S. Deshpande, Spencer A. Hawkins, Adam Maffe and Micah J. Green
Applied Materials Today, 2025, 44, 102705
DOI: 10.1016/j.apmt.2025.102705

Balancing mechanical performance and repair ability of epoxy and its composites via dual dynamic mechanism
Lei Wang, Mushan Yuan, Yisen Huang, Yang Chen, Shengtai Zhou, Huawei Zou, Yinfu Luo, Zhengguang Heng and Mei Liang
Polymer, 2025, 336, 128881
DOI: 10.1016/j.polymer.2025.128881

Controlled Preform Consolidation for Manufacturing Difficult Resin System Composites
Dominic R. Palubiski, Natasha Shirshova, Emile S. Greenhalgh, Milo S. P. Shaffer and Dmitry S. Ivanov
SSP, 2026, 387, 75
DOI: 10.4028/p-eB7jZs

Effect of Healing Parameters on the Healing Efficiency of A Vitrimer
Bernard Mahoney, Obed Tetteh, Kingsley Yeboah Gyabaah, Patrick Mensah, John W. Gillespie and Guoqiang Li
J of Applied Polymer Sci, 2025, 142
DOI: 10.1002/app.57810

A comparative machinability analysis of polyimine vitrimer, epoxy and polycarbonate polymers through orthogonal machining experiments
Dániel István Poór, Marina Tobey, Philip Taynton, Ákos Pomázi, Andrea Toldy and Norbert Geier
Int J Adv Manuf Technol, 2024, 131, 1361
DOI: 10.1007/s00170-024-13087-9

Hybrid effects in biobased benzoxazine vitrimer composites reinforced with flax and carbon fibres
Killian BOURDON, Vincent BOULIC, Dhahabia ABDALLAH BOINA, Pierre VERGE, Daniel F. SCHMIDT and Tim HUBER
Materials & Design, 2025, 258, 114532
DOI: 10.1016/j.matdes.2025.114532

Eco-friendly thermally activated vitrimer resin composites with self-healing mechanical and electrically conducting functional capabilities
L. Amorim, P. Costa, C.R. Tubio, J.C. Viana and S. Lanceros-Méndez
Next Materials, 2026, 10, 101481
DOI: 10.1016/j.nxmate.2025.101481

Self-Healing Polymer Nanocomposites: Mechanisms, Structure–Property Relationships, and Emerging Applications
Sachin Kumar Sharma, Sandra Gajević, Lokesh Kumar Sharma, Yogesh Sharma, Mohit Sharma, Lozica Ivanović, Saša Milojević and Blaža Stojanović
Polymers, 2026, 18, 276
DOI: 10.3390/polym18020276

Conventional Thermoset Composites and Their Sustainable Alternatives with Vitrimer Matrix—Waste Management/Recycling Options with Focus on Carbon Fiber Reinforced Epoxy Resin Composites
Paraskevi Markouti, Evanthia Tzouma, Alkiviadis S. Paipetis and Nektaria-Marianthi Barkoula
Materials, 2025, 18, 351
DOI: 10.3390/ma18020351

Towards repairable composites: healing of mode I and mode II delaminations in woven glass fibre and vitrimer matrix laminates
Alejandro Lopez-Olmedo, Roberto Frassine and Marco L. Longana
Composites Part B: Engineering, 2025, 305, 112738
DOI: 10.1016/j.compositesb.2025.112738

Toward Sustainable Composites: Recyclability of Epoxy Vitrimer GFRPs and Enhanced Strength Retention Using MWCNT Filler
Sudhanshu Nartam, Sandip Budhe and Jinu Paul
Polymer Composites, 2026, 47, 7221
DOI: 10.1002/pc.70618

Thermally switchable catalysts for industrially relevant dynamic epoxy-anhydride composites
Matthias Udo Mayer-Kriehuber, Evelyn Sattler, David Reisinger, Daniel Bautista-Anguís, Szymon Gaca, Fleana A. Sabatino, Sebastian Maar, Sravendra Rana and Sandra Schlögl
Polymer, 2026, 358, 130175
DOI: 10.1016/j.polymer.2026.130175

Dynamic Covalent Bonds Enabled Carbon Fiber Reinforced Polymers Recyclability and Material Circularity
Xiaotong Fan, Jie Zheng, Jayven Chee Chuan Yeo, Sheng Wang, Ke Li, Joseph Kinyanjui Muiruri, Nikos Hadjichristidis and Zibiao Li
Angew Chem Int Ed, 2024, 63
DOI: 10.1002/anie.202408969

Investigating the welding and healing of epoxy anhydride vitrimer carbon fibre composites
Jeffrey Masten-Davies, Le Quan Ngoc Tran, Juan Zhang and Russell J. Varley
Composites Part A: Applied Science and Manufacturing, 2025, 196, 108956
DOI: 10.1016/j.compositesa.2025.108956

Fluorogenic Dynamic Covalent Polymers: Ultrafast, One-Pot Synthesis, Bond Exchange Visualization, and Vitrimer-Like Functionality
Wenhai Bian, Master Mwafulirwa, Khamis Ali Abdalla and Xiaolong Sun
Macromolecules, 2026, 59, 2623
DOI: 10.1021/acs.macromol.5c03598

Development and Characterization of Epoxy/Titanium Carbonitride (TiCN) Nanocomposites: Structural, Thermomechanical, and Dielectric Properties
Nikolaos Ploumis, Georgios N. Mathioudakis, Anastasios C. Patsidis and Georgios C. Psarras
J. Compos. Sci., 2026, 10, 265
DOI: 10.3390/jcs10050265

Polymers as Aerospace Structural Components: How to Reach Sustainability?
William E. Dyer and Baris Kumru
Macro Chemistry & Physics, 2023, 224
DOI: 10.1002/macp.202300186

Investigating the Feasibility of Metallizing Reprocessable Vitrimeric Components through Cold Spray Technique
Alessia Serena Perna, Antonello Astarita, Alfonso Martone, Barbara Palmieri and Antonio Viscusi
J. of Materi Eng and Perform, 2025, 34, 6510
DOI: 10.1007/s11665-025-11108-6

Quantitative Prediction of Stress Relaxation Kinetics in Dissociative Covalent Adaptable Networks
Jessica Mangialetto, Osman Konuray, Sasan Moradi, Xavier Fernández-Francos, Joost Brancart, Niko Van den Brande, Xavier Ramis and Guy Van Assche
Macromolecules, 2025, 58, 13074
DOI: 10.1021/acs.macromol.5c02070

Engineering flame and mechanical properties of natural plant-based fibre biocomposites
Mojtaba Ahmadi, Omid Zabihi, Zahra Komeily Nia, Vishnu Unnikrishnan, Colin J. Barrow and Minoo Naebe
Advanced Industrial and Engineering Polymer Research, 2025, 8, 168
DOI: 10.1016/j.aiepr.2024.08.002

Supramolecular Polymer Additives as Repairable Reinforcements for Dynamic Covalent Networks
Joost J. B. van der Tol, Shahzad Hafeez, Andy P. G. Bänziger, Hao Su, Johan P. A. Heuts, E. W. Meijer and Ghislaine Vantomme
Advanced Materials, 2024, 36
DOI: 10.1002/adma.202410723

Emerging Materials for Durable and Sustainable Design of Aeronautic Structures
Pedro Carvalho, João Aguiar-Branco and Rui Miranda Guedes
Materials, 2025, 18, 4922
DOI: 10.3390/ma18214922

Modular Epoxy-Thiol Oligosiloxane Vitrimers
Alex Stafford, Vincent W. Chen, LoriAnne Groo, Abigail T. Juhl and Luke A. Baldwin
Chem. Mater., 2025, 37, 9728
DOI: 10.1021/acs.chemmater.5c01894

4D-Printed Shape Memory Polymer Composites: Innovations in Smart Structures, Processing Strategies, and Application Prospects
Xixian Yu, Linlin Wang, Fenghua Zhang and Jinsong Leng
ACS Appl. Polym. Mater., 2025, 7, 14015
DOI: 10.1021/acsapm.5c02816

Retrosynthetic Life Cycle Assessment: A Short Perspective on the Sustainability of Integrating Thermoplastics and Artificial Intelligence Into Composite Systems
Vahid Yaghoubi and Baris Kumru
Advanced Sustainable Systems, 2024, 8
DOI: 10.1002/adsu.202300543

How to Characterize Covalent Adaptable Networks: A User Guide
Dimitri Berne, Sidonie Laviéville, Eric Leclerc, Sylvain Caillol, Vincent Ladmiral and Camille Bakkali-Hassani
ACS Polym. Au, 2025, 5, 214
DOI: 10.1021/acspolymersau.5c00004

Starch-Reinforced Vinylogous Urethane Vitrimer Composites: An Approach to Biobased, Reprocessable, and Biodegradable Materials
Philipp Haida, Suwabun Chirachanchai and Volker Abetz
ACS Sustainable Chem. Eng., 2023, 11, 8350
DOI: 10.1021/acssuschemeng.3c01340

Dynamic Covalent Bonds Enabled Carbon Fiber Reinforced Polymers Recyclability and Material Circularity
Xiaotong Fan, Jie Zheng, Jayven Chee Chuan Yeo, Sheng Wang, Ke Li, Joseph Kinyanjui Muiruri, Nikos Hadjichristidis and Zibiao Li
Angewandte Chemie, 2024, 136
DOI: 10.1002/ange.202408969

Adhesive bonding in automotive battery pack manufacturing and dismantling: a review
Vasco C. M. B. Rodrigues, Mohammad Mehdi Kasaei, Eduardo A. S. Marques, Ricardo J. C. Carbas and Lucas F. M. da Silva
Discov Mechanical Engineering, 2025, 4
DOI: 10.1007/s44245-025-00107-5

Towards the next development of vitrimers: Recent key topics for the practical application and understanding of the fundamental physics
Mikihiro Hayashi and Ralm G. Ricarte
Progress in Polymer Science, 2025, 170, 102026
DOI: 10.1016/j.progpolymsci.2025.102026

Biobased Acetal Vinyl Ester Thermosets for Recovery of Fiber Reinforcements in Composite Materials
Jaclyn A. McLaughlin, Emre Kinaci and Giuseppe R. Palmese
ACS Appl. Polym. Mater., 2024, 6, 11733
DOI: 10.1021/acsapm.4c01658

Zero-waste closed-loop recycling of carbon fiber reinforced vitrimer-based polymer composites with a long-extended prepreg shelf life
Roya Mahmoodi, Omid Zabihi, Mohammad Reza Zamani, Mojtaba Ahmadi, Milad Laghaei, Parisa Zamani, Mahmoud Reza Ghandehari Ferdowsi, Mohammad Jalal Zohuriaan-Mehr and Minoo Naebe
Adv Compos Hybrid Mater, 2025, 8
DOI: 10.1007/s42114-025-01463-2

Repairability of rubber-backed vitrimer composites under variations of impact damage
Jun Young Choi, Ji Ho Jeon and Sung-Hoon Ahn
Composites Communications, 2024, 51, 102102
DOI: 10.1016/j.coco.2024.102102

A Review on the Role of Crosslinked Polymers in Renewable Energy: Complex Network Analysis of Innovations in Sustainability
Ulises Martín Casado, Facundo Ignacio Altuna and Luis Alejandro Miccio
Sustainability, 2025, 17, 4736
DOI: 10.3390/su17104736

Polyolefins Vitrimers: Design Principles and Applications
Mostafa Ahmadi, Ahad Hanifpour, Sina Ghiassinejad and Evelyne van Ruymbeke
Chem. Mater., 2022, 34, 10249
DOI: 10.1021/acs.chemmater.2c02853

Rapid Photothermal Healing of Vitrimer Nanocomposites Activated by Gold-Nanoparticle-Coated Graphene Nanoplatelets
Yixin Ren, Amber M. Hubbard, Drake Austin, Jinghang Dai, Chen Li, Renjiu Hu, Peter Papaioannou, Catalin R. Picu, Dominik Konkolewicz, Alireza Sarvestani, Nicholas Glavin, Vikas Varshney, Ajit K. Roy, Zhiting Tian and Dhriti Nepal
ACS Appl. Nano Mater., 2024, 7, 18769
DOI: 10.1021/acsanm.4c02190

On the Welding of Vitrimers: Chemistry, Mechanics and Applications
Qian Shi, Chenyu Jin, Zhiqiang Chen, Le An and Tiejun Wang
Adv Funct Materials, 2023, 33
DOI: 10.1002/adfm.202300288

Upcycling Post-Consumer Recycled Polypropylene Using a “Tailor-Made” Dynamic Cross-Linker with Controlled “Cross-Link Distribution”
Indranil Dey, Ketaki Samanta, Siddhesh Sadashiv Rege, Samir Mandal, Sk Safikul Islam, Ria Sen Gupta, Amit Malakar, Ashok Misra and Suryasarathi Bose
ACS Sustainable Resour. Manage., 2024, 1, 2241
DOI: 10.1021/acssusresmgt.4c00271

Synthesis and induction heating-induced self-healing of epoxy vitrimer nanocomposites
Jiahao Huang, Shixian Zhang, Qing Wang and Lei Zhu
Front. Mater., 2025, 12
DOI: 10.3389/fmats.2025.1709367

Epoxy vitrimers: from essence to utility
H. Supriya, Sandeep Tripathi, Neetika Singh, Mukesh Jain and Suryasarathi Bose
International Polymer Processing, 2025, 40, 1
DOI: 10.1515/ipp-2024-0085

Recyclable photoluminescent elastomer incorporating carboxyl‐functionalized fluorescent powder via dynamic covalent cross‐linking
Biao Xia, Cheng Shi, Zhou Li, Tengfei Lin, Min Gao, Chunlin Zhao, Xiao Wu, Cong Lin and Jinyun Wang
Polymer Composites, 2023, 44, 4842
DOI: 10.1002/pc.27446

The role of thermo-oxidative degradation on the dynamic behavior of disulfide-based epoxy vitrimers
Niklas Lorenz, Andreas Klingler, William E. Dyer, Santiago J. Garcia and Baris Kumru
Polymer Degradation and Stability, 2026, 250, 112140
DOI: 10.1016/j.polymdegradstab.2026.112140

Perspective on the Development of Monomer Recovery Technologies from Plastics Designed to Last
Steffan K. Kristensen, Alexander Ahrens, Bjarke S. Donslund and Troels Skrydstrup
ACS Org. Inorg. Au, 2024, 4, 373
DOI: 10.1021/acsorginorgau.4c00009

Low-Viscosity, Dynamic Amidoamine Hardeners with Tunable Curing Kinetics for Epoxy Adhesives
Jonas Debuyck, Bram Daelman, Giulia Scurani, Susanne M. Fischer and Filip E. Du Prez
Macromolecules, 2025, 58, 9209
DOI: 10.1021/acs.macromol.5c01676

Epoxy-Based Vitrimer/GNP Nanocomposites: Unleashing Superior Shape Recovery and Multifunctional Properties
Luiza Benedetti, Kazue Orikasa, Alberto Jiménez-Suárez and Arvind Agarwal
ACS Appl. Eng. Mater., 2025, 3, 430
DOI: 10.1021/acsaenm.4c00758

Toward Reprocessable High‐Performance Elastomer: Self‐Assembly, Dynamic Covalent Chemistry, and Tailorable Properties
Xuan Qin, Yushu Tian, Hengheng Zhao, Jiadong Wang, Siqi Zhan, Jiajun Qu, Liqun Zhang and Jun Liu
Advanced Materials, 2025
DOI: 10.1002/adma.202515432

Recyclable fire-retardant bio-based thermosets: From molecular engineering to performances and applications
Yong Guo, Qingshan Yang, Siqi Huo, Juan Li, Pooya Jafari, Zhengping Fang, Pingan Song and Hao Wang
Progress in Polymer Science, 2025, 162, 101935
DOI: 10.1016/j.progpolymsci.2025.101935

Carbon fibres/RTM6 vitrimer and non-dynamic epoxy thermoset composites: comparative study of manufacturing, mechanical characteristics, water absorption, impact resistance, repairing and compression after impact
Vincent Schenk, Philippe Olivier, Karine Labastie, Mathias Destarac and Marc Guerre
Composites Part B: Engineering, 2025, 304, 112674
DOI: 10.1016/j.compositesb.2025.112674

Preparation of Silica Composite Vitrimers via One‐Shot Transformation from Simple Polyesters
Takahiro Kimura and Mikihiro Hayashi
Macro Chemistry & Physics, 2023, 224
DOI: 10.1002/macp.202300082

Time and temperature-dependent fracture mechanics of self-healing vitrimers
Omar El Arwadi, Ajinkya Raut, Jacob L. Meyer, Andreas Polycarpou and Mohammad Naraghi
Polymer, 2025, 322, 128148
DOI: 10.1016/j.polymer.2025.128148

Vanillin-Based Epoxy Vitrimers: Looking at the Cystamine Hardener from a Different Perspective
Solène Guggari, Fiona Magliozzi, Samuel Malburet, Alain Graillot, Mathias Destarac and Marc Guerre
ACS Sustainable Chem. Eng., 2023, 11, 6021
DOI: 10.1021/acssuschemeng.3c00379

Techno-Economic Approach to Carbon Fibre Fabrics for Structural Strengthening: Life-Cycle Cost Analysis, Market Value, and Economic Viability
Maciej Adam Dybizbański, Marceli Hązła, Alicja Krajewska and Katarzyna Rzeszut
Materials, 2026, 19, 1913
DOI: 10.3390/ma19101913

Polyketimine Covalent Adaptable Networks from Vinyl Monomers via a Free-Radical Approach
Sheng Wang, Ri Chen, Daniyar Syrlybayev, Maryam Al Jawad, Leo Liu, Ramathasan Thevamaran and Padma Gopalan
Macromolecules, 2026, 59, 4417
DOI: 10.1021/acs.macromol.5c03058

Development and Digital Light Processing 3D Printing of a Vitrimer Composed of Glycerol 1,3-Diglycerolate Diacrylate and Tetrahydrofurfuryl Methacrylate
Sigita Grauzeliene, Anne-Sophie Schuller, Christelle Delaite and Jolita Ostrauskaite
ACS Appl. Polym. Mater., 2023, 5, 6958
DOI: 10.1021/acsapm.3c01018

Biobased and aromatic Covalent Adaptable Networks: When architectures meet properties, within the framework of a circular bioeconomy
Lisa Sougrati, Antoine Duval and Luc Avérous
Materials Science and Engineering: R: Reports, 2024, 161, 100882
DOI: 10.1016/j.mser.2024.100882

Thermally Latent Bases in Dynamic Covalent Polymer Networks and their Emerging Applications
David Reisinger, Matthias Udo Kriehuber, Marcel Bender, Daniel Bautista‐Anguís, Bernhard Rieger and Sandra Schlögl
Advanced Materials, 2023, 35
DOI: 10.1002/adma.202300830

Revisiting Unsaturated Polyesters: Recyclable-by-Design Vinylester Resins for the Circular Economy
Giulia Altamura, Eleonora Manarin, Gianmarco Griffini and Stefano Turri
European Polymer Journal, 2025, 228, 113819
DOI: 10.1016/j.eurpolymj.2025.113819

Sustainable adhesives: Exploring boronic ester vitrimers containing lignin microparticles
Martina Nardi, Luca Ceseracciu, Vincenzo Scribano, Marco Contardi, Athanassia Athanassiou and Arkadiusz Zych
Chemical Engineering Journal, 2024, 495, 153400
DOI: 10.1016/j.cej.2024.153400

Superparamagnetic iron oxide nanoparticle – vitrimer nanocomposites: Reprocessable and multi-responsive materials
Gloria Signorato, Lea R. Klauke, Philipp Haida, Tobias Vossmeyer and Volker Abetz
Polymer, 2025, 318, 127968
DOI: 10.1016/j.polymer.2024.127968

Sustainable polymer composite marine structures: Developments and challenges
Christophe Baley, Peter Davies, Wilfried Troalen, Alexandre Chamley, Imogen Dinham-Price, Adrien Marchandise and Vincent Keryvin
Progress in Materials Science, 2024, 145, 101307
DOI: 10.1016/j.pmatsci.2024.101307

Functionalized Glass Fibers in Reversible Networks─A Cross-Road to Dimensional Stability and Facile Recycling of Cross-Linked Elastomers
Karla Garfias, Inger Odnevall, Minna Hakkarainen and Karin Odelius
ACS Sustainable Chem. Eng., 2025, 13, 6746
DOI: 10.1021/acssuschemeng.5c01615

Enhanced healability and weldability properties of vitrimers: Review article
Omar Amin, Amna Ramzy, Wael S. I. Abou‐Elmagd and Mohamed Hazem Abdellatif
Polymer Engineering & Sci, 2025, 65, 1607
DOI: 10.1002/pen.27086

Polypropylene Covalent Adaptable Networks with Full Cross-Link Density Recovery after Reprocessing: Development by Free-Radical Reactive Processing with Resonance-Stabilized, Aromatic Disulfide Cross-Linkers
Yen-Wen Huang, Mathew J. Suazo, Stephanie M. Barbon, Hayley A. Brown, Evelyn Auyeung, Colin Li Pi Shan and John M. Torkelson
ACS Macro Lett., 2025, 14, 341
DOI: 10.1021/acsmacrolett.5c00061

Thermoreversible [2 + 2] Photodimers of Monothiomaleimides and Intrinsically Recyclable Covalent Networks Thereof
Mohammed Aljuaid, Yujing Chang, David M. Haddleton, Paul Wilson and Hannes A. Houck
J. Am. Chem. Soc., 2024, 146, 19177
DOI: 10.1021/jacs.4c04193

Radio frequency (RF) enabled forming of vitrimers for moldless manufacturing
Agni K. Biswal, Surabhit Gupta, Xu Zhou, Thomas K. Lewis, Juming Tang and Aniruddh Vashisth
Carbon, 2025, 238, 120304
DOI: 10.1016/j.carbon.2025.120304

Toward Circular Polymer Materials and Manufacturing: Dynamic Bonding Strategies for Upcycling Thermoplastics and Thermosets
Leila Shahriari and Sungjin Kim
Macromol. Rapid Commun., 2025, 46
DOI: 10.1002/marc.202401011

Vitrimers: bridging the recycling gap between thermosets and thermoplastics
Indranil Dey and Suryasarathi Bose
J. Mater. Sci.: Compos., 2026, 7
DOI: 10.1186/s42252-025-00086-6

Self-Healable, Recyclable, Adhesive Functional Elastomer Composites Based on Dual Dynamic Chemistries
Sagar Kumar Raut and Maarten M. J. Smulders
ACS Appl. Polym. Mater., 2026, 8, 6523
DOI: 10.1021/acsapm.6c00438

A Group-Enriched Viscoelastic Model for High-Damping Vitrimers with Many Dangling Chains
Yan Li, Haibo Feng, Jing Xiong and Li Li
Materials, 2024, 17, 5062
DOI: 10.3390/ma17205062

Dynamic Covalent Polymer Nanocomposites: Engineering Network Structures for Multifunctional Properties
Xiaming Feng, Wenkang Zhou, Hongyu Yuan, Hongyu Yang and Cheng Yan
ACS Appl. Polym. Mater., 2026
DOI: 10.1021/acsapm.6c00818

Sustainable epigallocatechin gallate-based polycarbonate vitrimers with flame-retardant and antioxidant properties for closed-loop recyclable carbon fiber composites
Jialiang Zhong, Zhaoyi Luo, Yue Wang and Yanning Zeng
Polymer, 2025, 335, 128841
DOI: 10.1016/j.polymer.2025.128841

Role of the aspect ratio of graphene oxide (GO) on the interface and mechanical properties of vitrimer/GO nanocomposites
Shenzhi Shen, Ian A. Kinloch and Cristina Vallés
Composites Science and Technology, 2025, 265, 111151
DOI: 10.1016/j.compscitech.2025.111151

Beyond durability: the transformative journey of carbon fiber reinforced epoxy composites through advanced interfacial engineering, self-healing, and vitrimer-enabled recycling
Samir Mandal, Ashis Halder, Bhashkar Singh Bohra, Ketaki Samanta, Anju C S, Subodh Kumar and Suryasarathi Bose
Adv Compos Hybrid Mater, 2026, 9
DOI: 10.1007/s42114-025-01544-2

Ellipsometric Characterization of Network Topology Transition in Vitrimers
Yuming Wang, Jaylen Davis, Travis L. Thornell, Sergei Nazarenko, Derek L. Patton, Yoan C. Simon and Zhe Qiang
ACS Macro Lett., 2025, 14, 1801
DOI: 10.1021/acsmacrolett.5c00640

Assessment of recycling and repair methods for discontinuous glass fiber reinforced vitrimer composites with reclaimed parts
Ji Ho Jeon, Jun Young Choi, Geun Young Kim, Cheonghwa Lee, Jennifer Callanga, Shreyes N. Melkote and Sung-Hoon Ahn
Manufacturing Letters, 2024, 41, 1659
DOI: 10.1016/j.mfglet.2024.09.193

Rapid forming of programmable shaped morphogenic composite through additive manufacturing & frontal polymerization
Ivan C.L. Wu and Jeffery W. Baur
Additive Manufacturing, 2025, 110, 104911
DOI: 10.1016/j.addma.2025.104911

Segmental and Chain Dynamics of Polyisoprene-Based Model Vitrimers
Angel Alegría, Arantxa Arbe, Juan Colmenero, Saibal Bhaumik, Konstantinos Ntetsikas and Nikos Hadjichristidis
Macromolecules, 2024, 57, 5639
DOI: 10.1021/acs.macromol.3c02558

Polybenzoxazine-based covalent adaptable networks: A mini-review
Antoine Adjaoud, Laura Puchot and Pierre Verge
Polymer, 2023, 287, 126426
DOI: 10.1016/j.polymer.2023.126426

A review on aging effects of thermoset prepregs
D. Budelmann, D. Gibhardt and B. Fiedler
Composites Part B: Engineering, 2025, 303, 112611
DOI: 10.1016/j.compositesb.2025.112611

Current State-of-the-Art and Perspectives in the Design and Application of Vitrimeric Systems
Diego Pugliese and Giulio Malucelli
Molecules, 2025, 30, 569
DOI: 10.3390/molecules30030569

Upcycling of waste polycarbonate to recyclable Poly(carbonate-imines) with exceptional thermal properties and unprecedented flame retardancy
Yi-Chun Chen, Pin-Qi Mu, Kamani Sudhir K. Reddy, Ru-Jong Jeng, Mahdi M. Abu-Omar and Ching-Hsuan Lin
Chemical Engineering Journal, 2024, 492, 152376
DOI: 10.1016/j.cej.2024.152376

Processable crosslinked terpolymers made from elemental sulfur with wide range of thermal and mechanical properties
Peiyao Yan, Haoran Wang, Liam James Dodd and Tom Hasell
Commun Mater, 2023, 4
DOI: 10.1038/s43246-023-00417-9

A Simple Design of UV‐curable Covalent Adaptive Networks Operated by Thiourea Bond Exchange
Ryota Ohnishi, Hiroshi Sasaki and Mikihiro Hayashi
Chemistry A European J, 2025, 31
DOI: 10.1002/chem.202502416

Oligosiloxane-Based Epoxy Vitrimers: Adaptable Thermosetting Networks with Dual Dynamic Bonds
Amelia A. Putnam-Neeb, Alex Stafford, Sachin Babu, Steven J. Chapman, Christina M. Hemmingsen, Md. Sherajul Islam, Ajit K. Roy, Julia A. Kalow, Vikas Varshney, Dhriti Nepal and Luke A. Baldwin
ACS Appl. Polym. Mater., 2024, 6, 14229
DOI: 10.1021/acsapm.3c03082

Mechanical Behaviour of As-Manufactured and Repaired Aligned Discontinuous Basalt Fibre-Reinforced Vitrimer Composites
Leon L. Messmer, Ali Kandemir, Burak Ogun Yavuz, Marco L. Longana and Ian Hamerton
Polymers, 2024, 16, 1089
DOI: 10.3390/polym16081089

PMSE Centennial: Celebration of Success and New Frontiers in Polymer Materials Science and Engineering
Melissa A. Grunlan, LaShanda T. J. Korley, Qinghuang Lin, Christopher L. Soles, Rigoberto Advincula, Arthi Jayaraman, Elizabeth Cosgriff-Hernandez, Elsa Reichmanis, Jodie L. Lutkenhaus, Rodney D. Priestley, Brigitte Voit and Thomas H. Epps
ACS Macro Lett., 2025, 14, 1465
DOI: 10.1021/acsmacrolett.5c00626

Bio-based vitrimers and covalent adaptable networks – a short review
Deniz Bulutcu and Steven Eschig
Next Sustainability, 2026, 7, 100235
DOI: 10.1016/j.nxsust.2025.100235

Vitrimer Nanocomposites for Highly Thermal Conducting Materials with Sustainability
Younggi Hong and Munju Goh
Polymers, 2024, 16, 365
DOI: 10.3390/polym16030365

Synergetic Hybridization Strategy to Enhance the Dynamicity of Poorly Dynamic CO2‐derived Vitrimers achieved by a Simple Copolymerization Approach
Guillem Seychal, Marta Ximenis, Vincent Lemaur, Bruno Grignard, Roberto Lazzaroni, Christophe Detrembleur, Haritz Sardon, Nora Aranburu and Jean‐Marie Raquez
Adv Funct Materials, 2025, 35
DOI: 10.1002/adfm.202412268

Preparation and characterization of epoxy vitrimer asphalt based on transesterification dynamic covalent bond system
Zhe Zhao, Cong Qi, Guanyu Li, Yujin Yao, Liang Fan, Dongliang Kuang, Huaxin Chen, Yongchang Wu and Peng Xu
Fuel, 2025, 388, 134530
DOI: 10.1016/j.fuel.2025.134530

Designing all-vitrimer nanocomposites to combine low energy consumption, mechanical robust and recyclability
Hengheng Zhao, Zhenyuan Li, Siqi Zhan, Jiajun Qu, Tongkui Yue, Ganggang Zhang, Weifeng Zhang, Jun Liu and Liqun Zhang
Nano Energy, 2025, 142, 111215
DOI: 10.1016/j.nanoen.2025.111215

Molecular Simulation of Covalent Adaptable Networks and Vitrimers: A Review
Argyrios V. Karatrantos, Olivier Couture, Channya Hesse and Daniel F. Schmidt
Polymers, 2024, 16, 1373
DOI: 10.3390/polym16101373

From epoxy vitrimers to DOPO–based (bio–)epoxy vitrimers: Current state-of-the-art and perspectives
Cristian-Dragos Varganici, Liliana Rosu, Dan Rosu and Giulio Malucelli
Chemical Engineering Journal, 2025, 522, 167635
DOI: 10.1016/j.cej.2025.167635

Activated carbon and cellulose nanofiber loadings affect self-healing and functional properties of epoxy vitrimer composites
Chuan Li Lee, Kit Ling Chin, Balkis Fatomer A. Bakar, Luqman Chuah Abdullah and Mohammad Iman Abu Salim
Cellulose, 2026, 33, 3283
DOI: 10.1007/s10570-026-07012-4

Multi-matrix continuously-reinforced composites: A novel route to sustainable repair of composite structures
Dominic R. Palubiski, Marco L. Longana, Janice M. Dulieu-Barton, Ian Hamerton and Dmitry S. Ivanov
Materials & Design, 2023, 235, 112446
DOI: 10.1016/j.matdes.2023.112446

Stress Relaxation Modulation via Functionalized Silica in Covalent Adaptable Networks
Jaehyun Cho, Gabriel Joaquim Sampaio de Almeida, Mridula Nandi, M. G. Finn and Blair Brettmann
ACS Appl. Polym. Mater., 2026, 8, 6739
DOI: 10.1021/acsapm.6c00613

Liquid Metal‐Vitrimer Conductive Composite for Recyclable and Resilient Electronics
Dong Hae Ho, Meng Jiang, Ravi Tutika, Joshua C. Worch and Michael D. Bartlett
Advanced Materials, 2025, 37
DOI: 10.1002/adma.202501341

Thia-Michael Reaction: The Route to Promising Covalent Adaptable Networks
Dimitri Berne, Vincent Ladmiral, Eric Leclerc and Sylvain Caillol
Polymers, 2022, 14, 4457
DOI: 10.3390/polym14204457

Environmentally Friendly Sustainable Thermoset Vitrimer-Containing Polyrotaxane
Shota Ando, Masaki Hirano, Lisa Watakabe, Hideaki Yokoyama and Kohzo Ito
ACS Materials Lett., 2023, 5, 3156
DOI: 10.1021/acsmaterialslett.3c00895

Propylene–Ethylene Copolymer Covalent Adaptable Networks Synthesized by Resonance‐Stabilized, Radical‐Based Reactive Processing with Excellent Elevated‐Temperature Creep Resistance
Yen‐Wen Huang, Mathew J. Suazo, Stephanie M. Barbon, Hayley A. Brown, Evelyn Auyeung, Colin Li Pi Shan and John M. Torkelson
ChemSusChem, 2025, 18
DOI: 10.1002/cssc.202501137

Exploring the repairing capabilities of high-performance glass fiber reinforced vitrimer composites
Niklas Lorenz, Mirko Simonetto, Valea Wisniewsk, Björn Riecken and Baris Kumru
Composites Part B: Engineering, 2026, 312, 113314
DOI: 10.1016/j.compositesb.2025.113314

Modular infusion: A practical application of vitrimers derisking manufacture and enabling repair and (dis)assembly
Joseph Soltan, Jamie Hartley, Janice M. Dulieu-Barton and Dmitry S. Ivanov
Sustainable Materials and Technologies, 2025, 46, e01680
DOI: 10.1016/j.susmat.2025.e01680

Damage and self-healing behaviors in aircraft-grade carbon fiber reinforced vitrimer unidirectional laminates containing exchangeable disulfide crosslinks
Ryo Higuchi, Manato Kumada, Yu Zusho, Tomohiro Yokozeki and Takaya Suzuki
Composites Part B: Engineering, 2026, 310, 113184
DOI: 10.1016/j.compositesb.2025.113184

Sustainable fire-safe epoxy composites enabled by reactive polyphosphonates
Arvindh Sekar, Hermance Muller, Cédric Hervieu, Sithiprumnea Dul, Milijana Jovic, Dambarudhar Parida, Sandro Lehner, Patrick Rupper, Edith Perret and Sabyasachi Gaan
Chemical Engineering Journal, 2025, 520, 165779
DOI: 10.1016/j.cej.2025.165779

Qualification of the Vitrimeric Matrices in Industrial-Scale Wet Filament Winding Processes for Type-4 Pressure Vessels
Jonathan Alms, Anna Katharina Sambale, Jannick Fuchs, Niklas Lorenz, Nina von den Berg, Tobias Conen, Hakan Çelik, Rainer Dahlmann, Christian Hopmann and Markus Stommel
Polymers, 2025, 17, 1146
DOI: 10.3390/polym17091146

En route to realistic sustainable structural fiber-reinforced polymers in a circular economy
Guillem Seychal, Gabriel Perli, Anne Goldberg, Haritz Sardon, Nora Aranburu and Jean-Marie Raquez
Adv Compos Hybrid Mater, 2025, 8
DOI: 10.1007/s42114-025-01508-6

Reprocessable and 3D printable polydimethylsiloxane by dynamic siloxane bond exchange
Woohwa Lee, Hyun Kim, In-Soo Han, Chang-Geun Chae, Sungmin Park, Dong-Gyun Kim and Yong Seok Kim
MRS Communications, 2024, 14, 527
DOI: 10.1557/s43579-024-00553-4

A designer Schiff based motif offered dual dynamic exchangeable bonds, faster curing and closed‐loop circularity in epoxy vitrimers
Sandeep Tripathi, Supriya H. and Suryasarathi Bose
SPE Polymers, 2024, 5, 136
DOI: 10.1002/pls2.10114

Machinability of Vitrified Semi-Finished Products: Chip Formation and Heat Development at the Cutting Edge
Jannick Fuchs, Yehor Kozlovets, Jonathan Alms, Markus Meurer, Christian Hopmann, Thomas Bergs and Mustapha Abouridouane
Polymers, 2025, 17, 2681
DOI: 10.3390/polym17192681

Recycling and Upcycling of Polyurethane Thermosets: The Second Life of Polymers
Dong Liu, Chenxi Huyan, Haoxiang Li, Jin Ge, Fei Chen and Liqun Zhang
Advanced Materials, 2026
DOI: 10.1002/adma.202515809

Vitrimer Transition Phenomena from the Perspective of Thermal Volume Expansion and Shape (In)stability
Andreas Klingler, David Reisinger, Sandra Schlögl, Bernd Wetzel, Ulf Breuer and Jan-Kristian Krüger
Macromolecules, 2024, 57, 4246
DOI: 10.1021/acs.macromol.4c00207

Characterization and modeling of an epoxy vitrimer based on disulfide exchange for wet filament winding applications
N. Lorenz, T. Zawadzki, L. Keller, J. Fuchs, K. Fischer and Ch. Hopmann
Polymer Engineering & Sci, 2024, 64, 3682
DOI: 10.1002/pen.26805

Assessing the Impact of the Off-Stoichiometric Epoxy/Amine Ratio on the Curing Kinetics and Properties of Space-Grade Disulfide-Based Vitrimer Resins
Joséphine de Calbiac, Philippe Olivier, Rima Sfar Zbed, Marina Torres, Marion Broutelle, Mathias Destarac and Marc Guerre
ACS Appl. Polym. Mater., 2025, 7, 5271
DOI: 10.1021/acsapm.5c00637

A novel approach to design structural natural fiber composites from sustainable CO2-derived polyhydroxyurethane thermosets with outstanding properties and circular features
Guillem Seychal, Pierre Nickmilder, Vincent Lemaur, Connie Ocando, Bruno Grignard, Philippe Leclère, Christophe Detrembleur, Roberto Lazzaroni, Haritz Sardon, Nora Aranburu and Jean-Marie Raquez
Composites Part A: Applied Science and Manufacturing, 2024, 185, 108311
DOI: 10.1016/j.compositesa.2024.108311

Dual-vat photopolymerization 3D printing of vitrimers
Usman Shaukat, Andreas Thalhamer, Elisabeth Rossegger and Sandra Schlögl
Additive Manufacturing, 2024, 79, 103930
DOI: 10.1016/j.addma.2023.103930

Development and Perspectives of Biobased Thermal Conductive Polymer Composites
Chenyi Yang, Yongcun Zhou and Wei Lu
ACS Appl. Polym. Mater., 2024, 6, 12914
DOI: 10.1021/acsapm.4c02085

Magnetothermal‐Triggered Response and Self‐Healing of Recyclable and Reprocessable Nanocomposites for Actuation Systems
Maria Weißpflog, Gloria Signorato, Birgit Hankiewicz and Volker Abetz
Adv Funct Materials, 2026
DOI: 10.1002/adfm.75260

Evaluation of 2,5‐Furandicarboxylic Acid as Building Block for Unsaturated Polyester Resins
Brijesh Savalia, Michael Rabenstein, Antje Lieske and Daniel Zehm
Chemie Ingenieur Technik, 2024, 96, 575
DOI: 10.1002/cite.202300148

Optimising Recycling Processes for Polyimine-Based Vitrimer Carbon Fibre-Reinforced Composites: A Comparative Study on Reinforcement Recovery and Material Properties
Ákos Pomázi, Dániel István Poór, Norbert Geier and Andrea Toldy
Materials, 2024, 17, 2372
DOI: 10.3390/ma17102372

Toward Sustainable Fiber‐Reinforced Polymer Composites
Iris Elser and Michael R. Buchmeiser
Macro Materials & Eng, 2024, 309
DOI: 10.1002/mame.202400013

Eco-efficient, hydrophobic, self-healing and self-stratifying coating for polycarbonate
F. Samyn, H. Ferreira, K. Bui, I. Muro-Puente, C. Biget, A. Lebeau, S. Bellayer, M. Casetta and M. Jimenez
Progress in Organic Coatings, 2024, 196, 108732
DOI: 10.1016/j.porgcoat.2024.108732

Epoxy-Based Vitrimers for Sustainable Infrastructure: Emphasizing Recycling and Self-Healing Properties
Myung Kue Lee, Min Ook Kim, Taehwi Lee, Sanghwan Cho, Dongchan Kim, Wonghil Chang, Yongseok Kwon, Seongkwan Mark Lee, Ju Kwang Kim and Bong Cheol Son
Polymers, 2025, 17, 373
DOI: 10.3390/polym17030373

Self‐Healing, Recyclable, Biodegradable, Electrically Conductive Vitrimer Coating for Soft Robotics
Giulia Spallanzani, Maedeh Najafi, Muhammad Zahid, Evie L. Papadopoulou, Luca Ceseracciu, Manuel Catalano, Athanassia Athanassiou, Pietro Cataldi and Arkadiusz Zych
Advanced Sustainable Systems, 2023, 7
DOI: 10.1002/adsu.202300220

Investigation of mechanical properties and self‐healing efficiency of carbon fibers composites infused with unsaturated polyester vitrimer
Giuliana Rizzo, Vishnu Prasad, Miray Yasar, Gianluca Cicala, Alojz Ivankovic, Neal Murphy and Alberta Latteri
Polymer Composites, 2024, 45, 10404
DOI: 10.1002/pc.28483

Combined self-healing and thermoformability with shape memory effect in epoxy nanocomposite vitrimer from disulfide bond grafted TiO2 nanoparticles in the presence of a soft phase
Md Saruk Ahamed, Swatantra Kumar, Lakshi Nandan Borah, Kh Gopal Krishna and Sudipta Halder
Materials Chemistry and Physics, 2025, 344, 131149
DOI: 10.1016/j.matchemphys.2025.131149

Dynamic Disulfide Chemistry for Functional Polymers: Self‐Healing, Vitrimer Behavior, and Biochemical/Electronic Applications
Sebin Jin, Dongyeop X. Oh and Jeyoung Park
ChemSusChem, 2026, 19
DOI: 10.1002/cssc.202501023

Exploration of the Fire-Retardant Potential of Microencapsulated Ammonium Polyphosphate in Epoxy Vitrimer Containing Dynamic Disulfide Bonds
Wenlong Shao, Tongbing Li, Fei Xiao, Fubin Luo, Yong Qiu, Yanyan Liu, Bihe Yuan and Kaiyuan Li
Polymers, 2023, 15, 2839
DOI: 10.3390/polym15132839

Comparative study of flame retardancy in polyimine vitrimers and composites: Evaluating additive and reactive flame retardants acting via gas-, solid-, and combined-phase mechanisms
Andrea Toldy, Dániel István Poór, Beáta Szolnoki, Boglárka Devecser, Norbert Geier and Ákos Pomázi
Journal of Materials Science & Technology, 2024, 196, 101
DOI: 10.1016/j.jmst.2024.01.047

Healable Coatings as a Mechanism to Repair Leading Edge Erosion in Wind Energy
Amber M. Hubbard, Matthew Korey, Meghan E. Lamm, Katie Copenhaver, Jim Tobin and Vlastimil Kunc
Wind Energy, 2026, 29
DOI: 10.1002/we.70119

High strength, self-healing and hydrophobic fully bio-based polybenzoxazine reinforced pine oleoresin-based vitrimer and its application in carbon fiber reinforced polymers
Xuan Zhou, Minggui Shen, Fei Fu, Qiaoguang Li, He Liu and Zhanqian Song
Chemical Engineering Journal, 2024, 484, 149585
DOI: 10.1016/j.cej.2024.149585

Next-Generation Sustainable Composites with Flax Fibre and Biobased Vitrimer Epoxy Polymer Matrix
Hoang Thanh Tuyen Tran, Johannes Baur, Racim Radjef, Mostafa Nikzad, Robert Bjekovic, Stefan Carosella, Peter Middendorf and Bronwyn Fox
Polymers, 2025, 17, 1891
DOI: 10.3390/polym17141891

Circular Approaches for Thermoset Composites
Marta Camacho-Iglesias, Lorena Germán, Aitziber Iturmendi and Rubén Seoane-Rivero
J. Compos. Sci., 2025, 9, 682
DOI: 10.3390/jcs9120682

Synergistic flame retardancy of carbon fibre-reinforced polyimine vitrimer composites via vitrimer-based intumescent coating
Andrea Toldy, Dániel István Poór, Beáta Szolnoki, Norbert Geier and Ákos Pomázi
Composites Part A: Applied Science and Manufacturing, 2025, 198, 109135
DOI: 10.1016/j.compositesa.2025.109135

Nanocomposites from Au‐Doped Vinylogous Urethane Vitrimers Based on Different Block Copolymers and Their Recyclability in Combination with Plasmonic Heating
Patrick Schütz, Siraphat Weerathaworn, Clas Jürgensen, Birgit Hankiewicz and Volker Abetz
Macromol. Rapid Commun., 2025, 46
DOI: 10.1002/marc.202401027

Vitrimers for 3D Printing Technology: Current Status and Future Perspectives
Ankit Sharma, Avtar Chand, Inderdeep Singh and Bharti Gaur
Ind. Eng. Chem. Res., 2025, 64, 2491
DOI: 10.1021/acs.iecr.4c03705

Exploring the Limits of High-Tg Epoxy Vitrimers Produced through Resin-Transfer Molding
Vincent Schenk, Raffaele D’Elia, Philippe Olivier, Karine Labastie, Mathias Destarac and Marc Guerre
ACS Appl. Mater. Interfaces, 2023, 15, 46357
DOI: 10.1021/acsami.3c10007

Experimental Test of Associative Bond Exchange Models in Imine Vitrimers: The Importance of Decoupling of Segmental and Bond Exchange Dynamics
Sirui Ge and Christopher M. Evans
Macromolecules, 2025, 58, 12582
DOI: 10.1021/acs.macromol.5c01563

Elastomer-Based Vitrimers─A Review of the Preparation, Characterization, and Applications
Mary Soumya, Amit Das, Katia Alexander, Mohan V. Jacob, M. S. Sreekala, Hanna J. Maria and Sabu Thomas
ACS Omega, 2025, 10, 55137
DOI: 10.1021/acsomega.5c06453

Nanocellulose as a Bio-Based Reinforcement in Vitrimer Nanocomposites: Manufacturing and Mechanical Characterisation
M. Gljušćić, A. Cortés, A. Jiménez Suárez, S.G. Prolongo and C. Santiuste
Journal of Natural Fibers, 2026, 23
DOI: 10.1080/15440478.2026.2658268

Asymmetry tension/compression relaxation of residual stress contributes to delay transverse failure in vitrimer composites
Heshan Bai, Zhongtong Wang, Yuxin Zhao and Le An
Composites Part B: Engineering, 2025, 307, 112874
DOI: 10.1016/j.compositesb.2025.112874

UV-Assisted Oxidation of Black Phosphorus Enables Green Upcycling of Epoxy Thermosets into Multifunctional Flame Retardant Vitrimers
Kaiwen Deng, Shenghua Yang, Xiaming Feng, Hongyu Yang, Chaojun Wan, Cheng Yan, Guoqiang Li and Wei Cai
ACS Sustainable Chem. Eng., 2026, 14, 9027
DOI: 10.1021/acssuschemeng.5c12822

From biomass to vitrimers: Latest developments in the research of lignocellulose, vegetable oil, and naturally-occurring carboxylic acids
Yanfan Yang, Haibo Liu, Biying Lin, Dexi Tang, Jikun Xu, Lin Dai and Chuanling Si
Industrial Crops and Products, 2023, 206, 117690
DOI: 10.1016/j.indcrop.2023.117690

Microscopic Evidence for the Topological Transition in Model Vitrimers
Arantxa Arbe, Angel Alegría, Juan Colmenero, Saibal Bhaumik, Konstantinos Ntetsikas and Nikos Hadjichristidis
ACS Macro Lett., 2023, 12, 1595
DOI: 10.1021/acsmacrolett.3c00586

Challenges and opportunities of vitrimers for aerospace applications: a roadmap for industrial adoption
Bernard Mahoney, Kingsley Yeboah Gyabaah, Patrick Mensah, Anthony Kwasi Martey and Guoqiang Li
Cleaner Materials, 2025, 18, 100353
DOI: 10.1016/j.clema.2025.100353

Epoxy Vitrimer Formulation for Resin Transfer Molding: Reactivity, Process, and Material Characterization
Vincent Schenk, Joséphine De Calbiac, Raffaele D’Elia, Philippe Olivier, Karine Labastie, Mathias Destarac and Marc Guerre
ACS Appl. Polym. Mater., 2024, 6, 6087
DOI: 10.1021/acsapm.4c00796

On the advancement of sustainable filament-wound composites: benchmarking cleavable epoxy resin with recovered continuous carbon fibres against conventional epoxy
Masoud Bodaghi, Clément Mugemana, Samet Ozyigit, Claus G. Bayreuther, Sébastien Klein, Ahmed El Moumen, David Macieira, Munka Lu and Martin Kerschbaum
Composites Part A: Applied Science and Manufacturing, 2026, 208, 109924
DOI: 10.1016/j.compositesa.2026.109924

Covalent Adaptable Networks through Dynamic N,S-Acetal Chemistry: Toward Recyclable CO2-Based Thermosets
Thomas Habets, Guillem Seychal, Marco Caliari, Jean-Marie Raquez, Haritz Sardon, Bruno Grignard and Christophe Detrembleur
J. Am. Chem. Soc., 2023, 145, 25450
DOI: 10.1021/jacs.3c10080

State-of-the-art epoxy vitrimer nanocomposites with graphene, carbon nanotube and silica—fundamentals and applications (radiation shielding, sensing and corrosion resistance)
Ayesha Kausar and Ishaq Ahmad
Journal of Plastic Film & Sheeting, 2024, 40, 234
DOI: 10.1177/87560879241226504

Clustering and Nanoscale Vitrimeric Behavior in Telechelic Polybutadiene Model Vitrimers
Angel Alegría, Arantxa Arbe, Juan Colmenero, Nikolaos Patelis, Saibal Bhaumik, Mingtao Zhou and Nikos Hadjichristidis
Macromolecules, 2025, 58, 3407
DOI: 10.1021/acs.macromol.4c03035

A review on the formulation and performance of epoxidized vegetable oil-based vitrimer: stoichiometric calculations, curing agent functionalities and catalyst efficiency
Chuan Li Lee, Balkis Fatomer A. Bakar, Kit Ling Chin and Luqman Chuah Abdullah
R. Soc. Open Sci., 2025, 12
DOI: 10.1098/rsos.250612

Phase-Separated PVDF/Vitrimer Blends with Enhanced Mechanical and Chemical Stabilities Obtained by Reactive Processing
Marie-Isabelle Brunie, Mohammed Abouelrhanaime, Pierre Joncourt, Renaud Bouchet, Damien Montarnal and Eric Drockenmuller
ACS Appl. Polym. Mater., 2026, 8, 1335
DOI: 10.1021/acsapm.5c04230

The rise of phosphate ester exchange in developing dynamic covalent networks: Advances and challenges
Kaiwen Deng, Xiaming Feng, Hongyu Yang and Cheng Yan
European Polymer Journal, 2023, 196, 112286
DOI: 10.1016/j.eurpolymj.2023.112286

New Self-Healing Dielectric for High-Reliability, High-Performance PCB-Embedding Materials for Power Electronics Applications
Baptiste Arati, Vincent Bley, Pierre-Yves Pichon and Gilbert Teyssedre
IEEE Access, 2023, 11, 133967
DOI: 10.1109/ACCESS.2023.3334632

Biobased Transesterification Vitrimers
Ashwani Kumar and Luke A. Connal
Macromol. Rapid Commun., 2023, 44
DOI: 10.1002/marc.202200892

Sustainable-by-design biobased epoxy vitrimers and their carbon-fiber reinforced composites: Tuning reprocessability and recyclability via catalyst-controlled transesterification
Giulia Altamura, Carolina Vanini, Gianmarco Griffini and Stefano Turri
Results in Engineering, 2026, 29, 109506
DOI: 10.1016/j.rineng.2026.109506

Hierarchically Structured Vitrimer Biocomposites for Sustainable Manufacturing
Sargun Singh Rohewal, Joshua T. Damron, Jiho Seo, Nihal Kanbargi, Sumit Gupta, Holly E. Humphrey, Logan T. Kearney, Ji Chang, Laurene Tetard and Amit K. Naskar
Small, 2025, 21
DOI: 10.1002/smll.202500721

Rheological and Thermal Analysis of Polyborodimethylsiloxane (PBDMS) Gels: Investigating Dynamic Bonding and Energy Dissipation Mechanisms
Hamid Reza Shadman, Seyed Reza Ghaffarian Anbaran, Amirhosein Mohammadpour and Masoud Tavakoli Dare
Polymers for Advanced Techs, 2025, 36
DOI: 10.1002/pat.70289