Hydrophilic surface-modified 3D printed flexible scaffolds with high ceramic particle concentrations for immunopolarization-regulation and bone regeneration

Wenfeng Li, Fancheng Xu, Fang Dai, Tian Deng, Yufeng Ai, Zhiyong Xu, Chenjiang He, Fanrong Ai and Li Song

Biomater. Sci., 2023, 11, 3976
DOI: 10.1039/D3BM00362K

Three-dimensional printing of biomaterials for bone tissue engineering: a review

Ahmed El-Fiqi

Front. Mater. Sci., 2023, 17
DOI: 10.1007/s11706-023-0644-x

Interface Performance Enhancement in 3D-Printed Biphasic Scaffolds with Interlocking Hourglass Geometry

David S. Nedrelow and Michael S. Detamore

Ann Biomed Eng, 2025
DOI: 10.1007/s10439-025-03791-2

A critical review on the 3D bioprinting in large bone defects regeneration

Mostafa Shahrezaie, Ali Zamanian, Melika Sahranavard and Mohammad Hossein Shahrezaee

Bioprinting, 2024, 37, e00327
DOI: 10.1016/j.bprint.2023.e00327

Enhanced Cartilage and Subchondral Bone Repair Using Carbon Nanotube-Doped Peptide Hydrogel–Polycaprolactone Composite Scaffolds

Jiayi Lv, Yilun Wu, Zhicheng Cao, Xu Liu, Yuzhi Sun, Po Zhang, Xin Zhang, Kexin Tang, Min Cheng, Qingqiang Yao and Yishen Zhu

Pharmaceutics, 2023, 15, 2145
DOI: 10.3390/pharmaceutics15082145

Effect of the Addition of Inorganic Fillers on the Properties of Degradable Polymeric Blends for Bone Tissue Engineering

Stanisław Marecik, Iwona Pudełko-Prażuch, Mareeswari Balasubramanian, Sundara Moorthi Ganesan, Suvro Chatterjee, Kinga Pielichowska, Ravichandran Kandaswamy and Elżbieta Pamuła

Molecules, 2024, 29, 3826
DOI: 10.3390/molecules29163826

Comparative analysis of the efficiency of osteogenesis in peri-implant defect using scaffolds based on collagen, tricalcium phosphate and porous hydroxyapatite ceramics

S. P. Rubnikovich, S. V. Sirak, Yu. L. Denisova, M. G. Perikova, V. N. Lenev, N. I. Bykova, A. V. Arutyunov and V. B. Shovgenov

Vescì Nac. akad. navuk Belarusì, Ser. med. navuk, 2025, 22, 119
DOI: 10.29235/1814-6023-2025-22-2-119-133

Therapeutic Potential of Nanofibrous Scaffolds in Calvarial Bone Regeneration

Morteza Ahmari Haghighi, Alireza Jahandideh, Gholamreza Abedi Chamheidari, Saeed Hesaraki and Abolfazl Akbarzadeh

BioNanoSci., 2025, 15
DOI: 10.1007/s12668-025-01983-7

Recent advances on 3D-printed PCL-based composite scaffolds for bone tissue engineering

Maliheh Gharibshahian, Majid Salehi, Nima Beheshtizadeh, Mohammad Kamalabadi-Farahani, Amir Atashi, Mohammad-Sadegh Nourbakhsh and Morteza Alizadeh

Front. Bioeng. Biotechnol., 2023, 11
DOI: 10.3389/fbioe.2023.1168504

Towards Polycaprolactone-Based Scaffolds for Alveolar Bone Tissue Engineering: A Biomimetic Approach in a 3D Printing Technique

Krzysztof Stafin, Paweł Śliwa and Marek Piątkowski

IJMS, 2023, 24, 16180
DOI: 10.3390/ijms242216180

Elucidating osseointegration in vivo in 3D printed scaffolds eliciting different foreign body responses

Dewei Qiu, Chuanliang Cao, Aruna Prasopthum, Zhenchang Sun, Shan Zhang, Hanwen Yang, Zhiyong Xu, Jun Tao, Fanrong Ai and Jing Yang

Materials Today Bio, 2023, 22, 100771
DOI: 10.1016/j.mtbio.2023.100771

Design, characterization, and biocompatibility of chitosan-nano-hydroxyapatite/tricalcium phosphate sponges

Mariana Gutiérrez-Sánchez, Sofía Flores-Rocha, Amaury Pozos-Guillén, Héctor Flores, Vladimir Escobar-Barrios, Alma Gabriela Palestino-Escobedo and Diana María Escobar-García

Tissue and Cell, 2025, 94, 102804
DOI: 10.1016/j.tice.2025.102804

A comprehensive review of the effects of porosity and macro- and micropore formations in porous β-TCP scaffolds on cell responses

Ahmed Hafedh Mohammed Mohammed, Khairul Anuar Shariff, Dian Agustin Wahjuningrum, Mohamad Hafizi Abu Bakar and Hasmaliza Mohamad

J Aust Ceram Soc, 2023, 59, 865
DOI: 10.1007/s41779-023-00880-0

A simple method for fabricating polymer/ceramic functionally graded material scaffold

Fei Liu, Yiru Wang, Jian Cao, Junjie Chen, Tao Luo, Chen Zhou, Yichuan Tang and Haiqiong Xie

Ceramics International, 2024, 50, 14497
DOI: 10.1016/j.ceramint.2024.01.362

Self-hardening polycaprolactone/calcium phosphate inks for 3D printing of bone scaffolds: rheology, mechanical properties and shelf-life

Laura del-Mazo-Barbara and Maria-Pau Ginebra

Materials & Design, 2024, 243, 113035
DOI: 10.1016/j.matdes.2024.113035

Fabrication of 3D-Printed Scaffolds with Multiscale Porosity

Rafał Podgórski, Michał Wojasiński, Artur Małolepszy, Jakub Jaroszewicz and Tomasz Ciach

ACS Omega, 2024, 9, 29186
DOI: 10.1021/acsomega.3c09035

Application of the pH-Responsive PCL/PEG-Nar Nanofiber Membrane in the Treatment of Osteoarthritis

Zetao Wang, Yanping Zhong, Si He, Ruiming Liang, Chuanan Liao, Li Zheng and Jinmin Zhao

Front. Bioeng. Biotechnol., 2022, 10
DOI: 10.3389/fbioe.2022.859442

Pore Size of 3D-Printed Polycaprolactone/Polyethylene Glycol/Hydroxyapatite Scaffolds Affects Bone Regeneration by Modulating Macrophage Polarization and the Foreign Body Response

Wenfeng Li, Fang Dai, Shan Zhang, Fancheng Xu, Zhiyong Xu, Shousheng Liao, Liangtao Zeng, Li Song and Fanrong Ai

ACS Appl. Mater. Interfaces, 2022, 14, 20693
DOI: 10.1021/acsami.2c02001

Remote Assistance for Bone-Fractured Patients using Deep Learning Models

Nallakaruppan Kailasanathan, Sivaramakrishnan Somayaji, Mohamed Baza, Gautam Srivastava, SenthilKumaran Ulaganathan, Gokul Yenduri, Vaishali Ravindranath and Maazen Alsabaan

Applied Artificial Intelligence, 2024, 38
DOI: 10.1080/08839514.2024.2423326

Development of a novel direct powder screw extruder for 3D scaffold printing of PCL-based composites

Trung Kien Nguyen, Bang Thi Le, Minh Thi Hong Nguyen, Van-Sang Pham, Truong Do, Phuong Tran and Lan Xuan Phung

Int J Adv Manuf Technol, 2023, 128, 3161
DOI: 10.1007/s00170-023-12076-8

SrCO3@PCL/PDA composite scaffold promote osteoporotic bone regeneration through immune regulation

Jianhang Du, Xiaogang Bao, Jing Wen, Chen Tang, Chenxu Wang, Changgui Shi, Chengqing Yi, Guohua Xu and Dejian Li

Composites Part B: Engineering, 2025, 298, 112406
DOI: 10.1016/j.compositesb.2025.112406

Additive manufacturing of sustainable biomaterials for biomedical applications

Zia Ullah Arif, Muhammad Yasir Khalid, Reza Noroozi, Mokarram Hossain, HaoTian Harvey Shi, Ali Tariq, Seeram Ramakrishna and Rehan Umer

Asian Journal of Pharmaceutical Sciences, 2023, 18, 100812
DOI: 10.1016/j.ajps.2023.100812

Mechanically suitable and osteoinductive 3D‐printed composite scaffolds with hydroxyapatite nanoparticles having diverse morphologies for bone tissue engineering

Michał Wojasiński, Rafał Podgórski, Piotr Kowalczyk, Joanna Latocha, Kornel Prystupiuk, Oliwia Janowska, Stanisław Gierlotka, Monika Staniszewska, Tomasz Ciach and Paweł Sobieszuk

J Biomed Mater Res, 2024, 112
DOI: 10.1002/jbm.b.35409

3D printing of different fibres towards HA/PCL scaffolding induces macrophage polarization and promotes osteogenic differentiation of BMSCs

Jiaxiang Song, Shuai Huang, Xitao Linghu, Hengpeng Wu, Zhenyu Wen, Xiang Li, Qiping Huang, Weikang Xu, Qingde Wa and Christophe Egles

PLoS ONE, 2025, 20, e0314150
DOI: 10.1371/journal.pone.0314150

Niobium carbide-functionalized polylactic acid bone scaffold with near-infrared light-mediated shape memory and photothermal therapy for complex bone defects

Wang Guo, Sidan Feng, Bowen Li, Chen Xu, Yanting Wei, Yu Gong, Shan Wang, Huaming Mai, Yong Zhang and Yu Long

International Journal of Biological Macromolecules, 2025, 322, 146578
DOI: 10.1016/j.ijbiomac.2025.146578

Biocompatible Thermoplastics in Additive Manufacturing of Bone Defect Fillers: State-of-the-Art and Future Prospects

Dagmara Słota, Karina Niziołek, Edyta Kosińska, Julia Sadlik and Agnieszka Sobczak-Kupiec

Materials, 2025, 18, 3723
DOI: 10.3390/ma18163723

Printing tissue-engineered scaffolds made of polycaprolactone and nano-hydroxyapatite with mechanical properties appropriate for trabecular bone substitutes

Zahra Yazdanpanah, Nitin Kumar Sharma, Alice Raquin, David M. L. Cooper, Xiongbiao Chen and James D. Johnston

BioMed Eng OnLine, 2023, 22
DOI: 10.1186/s12938-023-01135-6

Recent advances in 3D-printed polylactide and polycaprolactone-based biomaterials for tissue engineering applications

Zia Ullah Arif, Muhammad Yasir Khalid, Reza Noroozi, Ali Sadeghianmaryan, Meisam Jalalvand and Mokarram Hossain

International Journal of Biological Macromolecules, 2022, 218, 930
DOI: 10.1016/j.ijbiomac.2022.07.140

Toughening 3D printed biomimetic hydroxyapatite scaffolds: Polycaprolactone-based self-hardening inks

Laura del-Mazo-Barbara, Linh Johansson, Francesco Tampieri and Maria-Pau Ginebra

Acta Biomaterialia, 2024, 177, 506
DOI: 10.1016/j.actbio.2024.02.012

3D printed magnetoactive nanocomposite scaffolds for bone regeneration

Yeganeh Kaviani, Hossein Eslami, Mojtaba Ansari and Seyed Ali Poursamar

Biomed. Mater., 2025, 20, 015028
DOI: 10.1088/1748-605X/ad9f04

Applications and progress of 3D printed bioceramic scaffolds in bone tissue repair and immune regulation

Yasi Chen, Shaohao Quan, Sirui Huang, Wenhui Liu, Zhenyi Chen, Jinhao Liu, Changwei Li and Hui Yang

Ceramics International, 2024, 50, 48891
DOI: 10.1016/j.ceramint.2024.09.294

Remotely Temporal Scheduled Macrophage Phenotypic Transition Enables Optimized Immunomodulatory Bone Regeneration

Donghua Huang, Kaicheng Xu, Xin Huang, Nong Lin, Yuxiao Ye, Suya Lin, Jiamin Zhang, Jiaqi Shao, Songfeng Chen, Mingmin Shi, Xingzhi Zhou, Peng Lin, Yucheng Xue, Chengcheng Yu, Xiaohua Yu, Zhaoming Ye and Kui Cheng

Small, 2022, 18
DOI: 10.1002/smll.202203680

Surface micropatterning of 3D printed PCL scaffolds promotes osteogenic differentiation of BMSCs and regulates macrophage M2 polarization

Weihua Huang, Xiayu Cai, Chujie Xiao, Wenlu Song, Huinan Yin and Weikang Xu

Heliyon, 2024, 10, e26621
DOI: 10.1016/j.heliyon.2024.e26621

Regenerative Engineering of a Biphasic Patient-Fitted Temporomandibular Joint Condylar Prosthesis

David S. Nedrelow, Ali Rassi, Boushra Ajeeb, Cameron P. Jones, Pedro Huebner, Fabio G. Ritto, Wendy R. Williams, Kar-Ming Fung, Bradford W. Gildon, Jakob M. Townsend and Michael S. Detamore

Tissue Engineering Part C: Methods, 2023, 29, 307
DOI: 10.1089/ten.tec.2023.0093

Cytocompatible and osteoinductive cotton cellulose nanofiber/chitosan nanobiocomposite scaffold for bone tissue engineering

Rafaella de Souza Salomão Zanette, Leonara Fayer, Rebecca Vasconcellos, Luiz Fernando Cappa de Oliveira, Carlos Magno da Costa Maranduba, Érika Lorena Fonseca Costa de Alvarenga, Maria Alice Martins, Humberto de Mello Brandão and Michele Munk

Biomed. Mater., 2023, 18, 055016
DOI: 10.1088/1748-605X/aceac8

3D-printed PLA/PEG bone scaffold: Body-adaptive thermally responsive shape memory and enhanced biological performance

Wang Guo, Enyu Wang, Yufeng Mao, Ziying Peng, Ping Li, Bowen Li, Yanjian Huang, Shan Wang, Bin Liu, Hui You and Yu Long

Surfaces and Interfaces, 2025, 56, 105712
DOI: 10.1016/j.surfin.2024.105712

In vitro degradation of 3D-printed polycaprolactone\biomimetic hydroxyapatite scaffolds: Impact of the sterilization method

Laura del-Mazo-Barbara, Judith Gómez-Cuyàs, Leandro Martínez-Orozco, Orlando Santana Pérez, Elisabeth Bou-Petit and Maria-Pau Ginebra

Polymer Testing, 2024, 139, 108566
DOI: 10.1016/j.polymertesting.2024.108566

Evaluation of ‘surgery-friendly’ bone scaffold characteristics: 3D printed ductile BG/PCL scaffold with high inorganic content to repair critical bone defects

Pengren Huang, Peng Yang, Keming Liu, Wei Tao, Jun Tao and Fanrong Ai

Biomed. Mater., 2023, 18, 015021
DOI: 10.1088/1748-605X/ac9e34

A strategy to tailor the mechanical and degradation properties of PCL-PEG-PCL based copolymers for biomedical application

Yu-Yao Liu, Juan Pedro Fernandez Blazquez, Guang-Zhong Yin, De-Yi Wang, Javier Llorca and Mónica Echeverry-Rendón

European Polymer Journal, 2023, 198, 112388
DOI: 10.1016/j.eurpolymj.2023.112388

Melt-extruded biocompatible surgical sutures loaded with microspheres designed for wound healing

X Deng, M L Gould, R G Katare and M A Ali

Biomed. Mater., 2024, 19, 055007
DOI: 10.1088/1748-605X/ad5baa