Influence of polyvinylpyrrolidone (PVP) capping layer on silver nanowire networks: theoretical and experimental studies

Jinyoung Hwang, Youngseon Shim, Seon-Mi Yoon, Sang Hyun Lee and Sung-Hoon Park

RSC Adv., 2016, 6, 30972
DOI: 10.1039/C5RA28003F

Oxidation-resistant micron-sized Cu–Sn solid particles fabricated by a one-step and scalable method

Yujia Liang, Su Cheun Oh, Xizheng Wang, Howard Glicksman, Dongxia Liu and Sheryl Ehrman

RSC Adv., 2017, 7, 23468
DOI: 10.1039/C7RA02080E

Metal particle-free inks for printed flexible electronics

Wendong Yang, Emil J. W. List-Kratochvil and Changhai Wang

J. Mater. Chem. C, 2019, 7, 15098
DOI: 10.1039/C9TC05463D

Applications of electrochemical sensors and biosensors based on modified screen-printed electrodes: a review

Hadi Beitollahi, Sayed Zia Mohammadi, Mohadeseh Safaei and Somayeh Tajik

Anal. Methods, 2020, 12, 1547
DOI: 10.1039/C9AY02598G

Inkjet printing and rapid ebeam sintering enable formation of highly conductive patterns in roll to roll process

Y. Farraj, M. Bielmann and S. Magdassi

RSC Adv., 2017, 7, 15463
DOI: 10.1039/C7RA00967D

Lyotropic ‘hairy’ TiO2 nanorods

Fei Cheng, Emanuele Verrelli, Fahad A. Alharthi, Stephen M. Kelly, Mary O'Neill, Neil T. Kemp, Stuart P. Kitney, Khue T. Lai, Georg H. Mehl and Thomas Anthopoulos

Nanoscale Adv., 2019, 1, 254
DOI: 10.1039/C8NA00054A

Light filter tailoring – the impact of light emitting diode irradiation on the morphology and optical properties of silver nanoparticles within polyethylenimine thin films

F. Kemper, E. Beckert, R. Eberhardt and A. Tünnermann

RSC Adv., 2017, 7, 41603
DOI: 10.1039/C7RA08293B

Multifunctional coatings of exfoliated and reassembled graphite on cellulosic substrates

Leandra Pereira Santos, Douglas Soares da Silva, João Paulo Ferreira Bertacchi, Kelly Schneider Moreira, Thiago Augusto Lima Burgo, Bruno Carreira Batista, Jeferson dos Santos, Patrick Alvarenga de Paula and Fernando Galembeck

Faraday Discuss., 2021, 227, 105
DOI: 10.1039/C9FD00109C

Solution-processable, niobium-doped titanium oxide nanorods for application in low-voltage, large-area electronic devices

F. A. Alharthi, F. Cheng, E. Verrelli, N. T. Kemp, A. F. Lee, M. A. Isaacs, M. O’Neill and S. M. Kelly

J. Mater. Chem. C, 2018, 6, 1038
DOI: 10.1039/C7TC04197G

N,N-Diethyl-diaminopropane-copper(ii) oxalate self-reducible complex for the solution-based synthesis of copper nanocrystals

Takanari Togashi, Masato Nakayama, Ryosuke Miyake, Keirei Uruma, Katsuhiko Kanaizuka and Masato Kurihara

Dalton Trans., 2017, 46, 12487
DOI: 10.1039/C7DT02510F

Oxide rupture-induced conductivity in liquid metal nanoparticles by laser and thermal sintering

Shanliangzi Liu, Serrae N. Reed, Matthew J. Higgins, Michael S. Titus and Rebecca Kramer-Bottiglio

Nanoscale, 2019, 11, 17615
DOI: 10.1039/C9NR03903A

Additive electronics manufacturing via droplet jetting technologies: materials, methods, applications, and opportunities

Ethan B. Secor, Daniel Yeboah and Livio Gamba

Nanoscale, 2025, 17, 18997
DOI: 10.1039/D5NR02110C

The effect of viscosity and surface tension on inkjet printed picoliter dots

Sarah Krainer, Chris Smit and Ulrich Hirn

RSC Adv., 2019, 9, 31708
DOI: 10.1039/C9RA04993B

Optimized inkjet-printed silver nanoparticle films: theoretical and experimental investigations

Sreemannarayana Mypati, Shankar R. Dhanushkodi, Michael McLaren, Aristides Docoslis, Brant A. Peppley and Dominik P. J. Barz

RSC Adv., 2018, 8, 19679
DOI: 10.1039/C8RA03627F

3D printed electronics with nanomaterials

Marcin Słoma

Nanoscale, 2023, 15, 5623
DOI: 10.1039/D2NR06771D

Inkjet printed nanomaterial based flexible radio frequency identification (RFID) tag sensors for the internet of nano things

Ravina Singh, Eric Singh and Hari Singh Nalwa

RSC Adv., 2017, 7, 48597
DOI: 10.1039/C7RA07191D

Laser direct writing of carbonaceous sensors on cardboard for human health and indoor environment monitoring

Kuan Ju, Yang Gao, Ting Xiao, Cunjiang Yu, Jianpin Tan and Fuzhen Xuan

RSC Adv., 2020, 10, 18694
DOI: 10.1039/D0RA02217A

Printed graphene and hybrid conductive inks for flexible, stretchable, and wearable electronics: Progress, opportunities, and challenges

Y.Z.N. Htwe and M. Mariatti

Journal of Science: Advanced Materials and Devices, 2022, 7, 100435
DOI: 10.1016/j.jsamd.2022.100435

Laser‐Induced Forward Transfer: A Digital Approach for Printing Devices on Regular Paper

Pol Sopeña, Javier Sieiro, Juan M. Fernández‐Pradas, José M. López‐Villegas and Pere Serra

Adv Materials Technologies, 2020, 5
DOI: 10.1002/admt.202000080

Design and characterization of novel fabric-based multi-resonators for wearable chipless RFID applications

Huating Tu, Yaya Zhang, Hong Hong, Jiyong Hu and Xin Ding

Textile Research Journal, 2021, 91, 1830
DOI: 10.1177/0040517521989780

Influence of co-solvent hydroxyl group number on properties of water-based conductive carbon pastes

Chengjie Hua, Xiaoming Li, Lijuan Shen, Hong Lei, Xiaoqian Guo, Zhuo Liu, Qingqiang Kong, Lijing Xie and Cheng-Meng Chen

Particuology, 2017, 33, 35
DOI: 10.1016/j.partic.2016.10.005

Novel approach to utilise highly conductive but electrochemically unstable current collector materials in textile supercapacitor electrodes

Paulo Luís, Darren Southee, George W Weaver and Upul Wijayantha

Flex. Print. Electron., 2023, 8, 025007
DOI: 10.1088/2058-8585/accf26

Facile and scalable fabrication of self-assembled Cu architecture with superior antioxidative properties and improved sinterability as a conductive ink for flexible electronics

Xinyan Hu, Gang Li, Pengli Zhu, Jiaoning Tang, Rong Sun and Ching-Ping Wong

Nanotechnology, 2019, 30, 355601
DOI: 10.1088/1361-6528/ab2252

Cellulose Nanocrystal and Silver Nanobelt Gel: Cooperative Interactions Enabling Dispersion, Colloidal Gels, and Flexible Electronics

Geoffrey Rivers, Li Yu and Boxin Zhao

Langmuir, 2019, 35, 15897
DOI: 10.1021/acs.langmuir.9b02003

Polyol Silver Nanowire Synthesis and the Outlook for a Green Process

Shohreh Hemmati, Michael T. Harris and Dale P. Barkey

Journal of Nanomaterials, 2020, 2020, 1
DOI: 10.1155/2020/9341983

Efficient Electrochemical Reconstruction of a Cobalt- and Silver-Based Precatalytic Oxalate Framework for Boosting the Alkaline Water Oxidation Performance

Suptish Ghosh, Ayan Mondal, Gouri Tudu, Sourav Ghosh, Heramba V. S. R. M. Koppisetti, Harish Reddy Inta, Dipannita Saha and Venkataramanan Mahalingam

ACS Sustainable Chem. Eng., 2022, 10, 7265
DOI: 10.1021/acssuschemeng.2c00497

Low-Cost Fabrication of Printed Electronics Devices through Continuous Wave Laser-Induced Forward Transfer

Pol Sopeña, Javier Arrese, Sergio González-Torres, Juan Marcos Fernández-Pradas, Albert Cirera and Pere Serra

ACS Appl. Mater. Interfaces, 2017, 9, 29412
DOI: 10.1021/acsami.7b04409

Hand‐Drawn Resistors, Capacitors, Diodes, and Circuits for a Pressure Sensor System on Paper

Júlio C. Costa, Amir Wishahi, Arash Pouryazdan, Martin Nock and Niko Münzenrieder

Adv Elect Materials, 2018, 4
DOI: 10.1002/aelm.201700600

Silver nanoparticle conductive inks: synthesis, characterization, and fabrication of inkjet-printed flexible electrodes

Iara J. Fernandes, Angélica F. Aroche, Ariadna Schuck, Paola Lamberty, Celso R. Peter, Willyan Hasenkamp and Tatiana L. A. C. Rocha

Sci Rep, 2020, 10
DOI: 10.1038/s41598-020-65698-3

Printable Transparent Conductive Films for Flexible Electronics

Dongdong Li, Wen‐Yong Lai, Yi‐Zhou Zhang and Wei Huang

Advanced Materials, 2018, 30
DOI: 10.1002/adma.201704738

Method validation and uncertainty evaluation in trace element analysis of high-purity silver by ICP-OES

Dinesh Singh, V.N. Singh and S.P. Singh

Analytica Chimica Acta, 2025, 1379, 344732
DOI: 10.1016/j.aca.2025.344732

The fabrication of highly conductive and flexible Ag patterning through baking Ag nanosphere−nanoplate hybrid ink at a low temperature of 100 °C

Y D Han, S M Zhang, H Y Jing, J Wei, F H Bu, L Zhao, X Q Lv and L Y Xu

Nanotechnology, 2018, 29, 135301
DOI: 10.1088/1361-6528/aaaa31

In-mold electronics applications: the control of ink properties through the use of mixtures of electrically conductive pastes

Michele Miliciani, Gian Maria Mendicino and Mark T DeMeuse

Flex. Print. Electron., 2023, 8, 035011
DOI: 10.1088/2058-8585/acd129

A review of flexible printed sensors for automotive infotainment systems

K. P. Srinivasan, T. Muthuramalingam and Ammar H. Elsheikh

Archiv.Civ.Mech.Eng, 2023, 23
DOI: 10.1007/s43452-023-00604-y

High electrical conductivity and bending resistance of Ag NPs/Ag flakes composite silver paste are achieved by sintering Ag NPs

Siqi Quan, Guoyou Gan, Xiang lei Yu, Xian jie Tang, Hu Sun, Zhuo Qian and Junpeng Li

Mater. Res. Express, 2024, 11, 055002
DOI: 10.1088/2053-1591/ad3f7c

Compatible Ag+ Complex-Assisted Ultrafine Copper Pattern Deposition on Poly(ethylene terephtalate) Film with Micro Inkjet Printing

Yuefeng Wang, Yan Hong, Guoyun Zhou, Wei He, Zhengping Gao, Shouxu Wang, Chong Wang, Yuanming Chen, Zesheng Weng and Yongquan Wang

ACS Appl. Mater. Interfaces, 2019, 11, 44811
DOI: 10.1021/acsami.9b11690

Flexible printed electronics and their applications in food quality monitoring and intelligent food packaging: Recent advances

Chongze Yue, Jingyi Wang, Zhiqiang Wang, Boyang Kong and Guiying Wang

Food Control, 2023, 154, 109983
DOI: 10.1016/j.foodcont.2023.109983

Flexible and Fully Printed Passive RF Resonators for Contact‐Less Solution Sensing

Giorgio E. Bonacchini and Fiorenzo G. Omenetto

Adv Funct Materials, 2024, 34
DOI: 10.1002/adfm.202314853

Design of Conductive Inks Containing Carbon Black and Silver Nanowires for Patternable Screen-Printing on Fabrics

Seokhwan Kim, Geumseong Lee, Jinwoo Park, Dahye Shin, Ki-Il Park, Kyoung Jin Jung and Yuho Min

J Powder Mater, 2024, 31, 500
DOI: 10.4150/jpm.2024.00409

Comparison of the morphology of silver particles prepared by chemical reduction of silver oxide with hydrogen peroxide and its thermal decomposition

Boris B. Bokhonov, Tatyana A. Borisenko, Olga A. Logutenko and Alexander I. Titkov

Chem. Pap., 2025, 79, 6333
DOI: 10.1007/s11696-025-04195-1

Fabrication and Performance Analysis of 3D Inkjet Flexible Printed Touch Sensor Based on AgNP Electrode for Infotainment Display

Srinivasan Palanisamy, Muthuramalingam Thangaraj, Khaja Moiduddin and Abdulrahman M. Al-Ahmari

Coatings, 2022, 12, 416
DOI: 10.3390/coatings12030416

A compact tri-notched flexible UWB antenna based on an inkjet-printable and plasma-activated silver nano ink

Wendong Yang, Xun Zhao, Zihao Guo, Haoqiang Sun and Emil J. W. List-Kratochvil

Sci Rep, 2024, 14
DOI: 10.1038/s41598-024-62253-2

Effect of formulation and process on morphology and electrical conductivity of Ag-graphene hybrid inks

Saeedeh Ghadimi, Saeedeh Mazinani, Ali Mohammad Bazargan and Farhad Sharif

Synthetic Metals, 2021, 281, 116913
DOI: 10.1016/j.synthmet.2021.116913

RETRACTED: Revolutionizing 3D printing: Unleashing the power of conductive polymers for next-gen biomedical applications

Hossein Madineh, Zahra Hosseinzadeh, Maryam Sadat Adibhosseini, Vallabh Ramesh, Mohammadreza Saeb, Payam Zarrintaj and Kunal Kate

Journal of Manufacturing Processes, 2025, 155, 1243
DOI: 10.1016/j.jmapro.2025.09.062

Düzenli Depolama Alanlarından Sızıntı Suyunun Mikrodalga Işınlama ile Arıtılmasına Genel Bakış

Alı ALHRAISHAWI and Şükrü ASLAN

Bilecik Şeyh Edebali Üniversitesi Fen Bilimleri Dergisi, 2022, 9, 1122
DOI: 10.35193/bseufbd.1054579

Critical Review of Recent Advancement in Metamaterial Design for Wireless Power Transfer

Webster Adepoju, Indranil Bhattacharya, Mary Sanyaolu, Muhammad Enagi Bima, Trapa Banik, Ebrahim N. Esfahani and Olatunji Abiodun

IEEE Access, 2022, 10, 42699
DOI: 10.1109/ACCESS.2022.3167443

Synthesis and Structure of the Silver(I) Complexes [Ag2(C4H6O4N)NO3]·H2O and Ag6(C6H6O6N)2 for the Formulation of Silver Inks in Nanoimprint Lithography

Susann Kintzel, Kai Eckhardt, Jürgen Getzschmann, Volodymyr Bon, Julia Grothe and Stefan Kaskel

Eur J Inorg Chem, 2020, 2020, 3167
DOI: 10.1002/ejic.202000359

Screen-printed disposable electrodes: Pharmaceutical applications and recent developments

Heba M. Mohamed

TrAC Trends in Analytical Chemistry, 2016, 82, 1
DOI: 10.1016/j.trac.2016.02.010

Fully flexible impedance-based pressure sensing via nanocomposites of polyvinyl alcohol filled with multiwalled carbon nanotubes, graphene nanoplatelets and silver nanoparticles

Yeter Sekertekin and Dincer Gokcen

J Mater Sci: Mater Electron, 2023, 34
DOI: 10.1007/s10854-023-11663-5

Conductive Korean Traditional Paper (Hanji) Coupled with Ag Nanowire for Functional Electronic Paper Windows in Hanok

Yong Jun Kim, Seo‐Yun Choi, Hak Shin and Han‐Ki Kim

Adv Materials Technologies, 2023, 8
DOI: 10.1002/admt.202202015

Highly Conductive Nano-Silver Circuits by Inkjet Printing

Dongbin Zhu and Minqiang Wu

Journal of Elec Materi, 2018, 47, 5133
DOI: 10.1007/s11664-018-6418-z

Gabapentin loaded silver nanoparticles (GBP@AgNPs) for its promising biomedical application as a nanodrug: Anticancer and Antimicrobial activities

Bushra Yaseen, Chinky Gangwar, Rashmi Nayak, Saurabh Kumar, Joy Sarkar, Monisha Banerjee and Radhey Mohan Naik

Inorganic Chemistry Communications, 2023, 149, 110380
DOI: 10.1016/j.inoche.2022.110380

Literature Review of Gallium: Conductive Ink Alternative?

Alejandro David Aguilar-Banegas, Fredy David Reyes-Cruz, Jesús Antonio Vargas-Pineda and Cesar Humberto Ortega-Jimenez

MSF, 2020, 975, 139
DOI: 10.4028/www.scientific.net/MSF.975.139

A Novel Optimized Neural Network Model for Ink Selection in Printed Electronics

Alagusundari Narayanan and Dr. Sivakumari Subramania Pillai

IJEER, 2023, 11, 1103
DOI: 10.37391/ijeer.110430

Controlled Enhancement in Hole Injection at Gold-Nanoparticle-on-Organic Electrical Contacts Fabricated by Spark-Discharge Aerosol Technique

Jongcheon Lee, Hyungchae Kim, Kyuhee Han, Yongmoon Lee, Mansoo Choi and Changsoon Kim

ACS Appl. Mater. Interfaces, 2019, 11, 6276
DOI: 10.1021/acsami.8b16303

Optimization of landfill leachate treatment by microwave oxidation using the Taguchi method

C.-J. Yeh, S.-L. Lo, J. Kuo and Y.-C. Chou

Int. J. Environ. Sci. Technol., 2018, 15, 2075
DOI: 10.1007/s13762-017-1567-9

Fabrication of color conductive inks by introducing SWCNT/Ag and various dyes into polymeric solutions for potential applications in disposable, cheap, and flexible electronics

Mohammad Hassan Ramezan Zadeh, Majid Seifi and Ebrahim Mousali

Materials Science-Poland, 2020, 38, 675
DOI: 10.2478/msp-2020-0079

Spectrophotometric, microscopic, crystallographic and X-ray based optimization and biological applications of Olea paniculata leaf extract mediated silver nanoparticles

Muhammad Faran Akhtar, Muhammad Irshad, Shaukat Ali, Muhammad Summer, Muhammad Jawad, Muhammad Faizan Akhter, Muhammad Adeel Farooq and Ghulam Asghar

South African Journal of Botany, 2024, 166, 97
DOI: 10.1016/j.sajb.2024.01.019

Facile preparation of particle-free hybrid amine silver ink with synergistic effect for low-resistivity flexible films

Liying Zhang, Guoyou Gan, Peiyuan Fan, Yunchuan Liu, Tianwei Wang, Weichao Li and Jinghong Du

J Coat Technol Res, 2023, 20, 1845
DOI: 10.1007/s11998-023-00781-8

Paint‐On Epidermal Electronics for On‐Demand Sensors and Circuits

Lancy Lin, Manik Dautta, Amirhossein Hajiaghajani, Alberto Ranier Escobar, Peter Tseng and Michelle Khine

Adv Elect Materials, 2021, 7
DOI: 10.1002/aelm.202000765

Preparation of silver coated nickel particles by thermal plasma with pre-treatment using ball milling

Dong-Wook Kim, Tae-Hee Kim and Dong-Wha Park

Advanced Powder Technology, 2018, 29, 2686
DOI: 10.1016/j.apt.2018.07.018

Growth Kinetic Study of Tannic Acid Mediated Monodispersed Silver Nanoparticles Synthesized by Chemical Reduction Method and Its Characterization

Chinky Gangwar, Bushra Yaseen, Indresh Kumar, Narendra Kumar Singh and Radhey Mohan Naik

ACS Omega, 2021, 6, 22344
DOI: 10.1021/acsomega.1c03100

Tailoring Morphology and Size of Silver Nanoparticles Prepared by Polyol Method by Changing the Structure of Silver Carboxylate Precursor

Alexander I. Titkov, Tatyana A. Borisenko, Olga A. Logutenko, Alexander M. Vorobyev, Evgeniy Yu. Gerasimov and Mikhail V. Shashkov

ChemistrySelect, 2023, 8
DOI: 10.1002/slct.202303693

Generating highly reflective and conductive metal layers through a light-assisted synthesis and assembling of silver nanoparticles in a polymer matrix

Mohamed Zaier, Loïc Vidal, Samar Hajjar-Garreau and Lavinia Balan

Sci Rep, 2017, 7
DOI: 10.1038/s41598-017-12617-8

Fundamental Research on the Structure and Properties of Electroerosion-Resistant Coatings on Copper

D. A. Romanov, V. V. Pochetukha, V. E. Gromov and K. V. Sosnin

Usp. Fiz. Met., 2021, 22, 204
DOI: 10.15407/ufm.22.02.204

Preparation of Cu@Ag Nanoparticles for Conductive Ink

Sijie Wang and Helong Yu

MSCE, 2021, 09, 1
DOI: 10.4236/msce.2021.99001

Alternative Sintering Processes and Their Influence on the Electrical Resistance of Printed Ag Nanoparticle Conductive Networks

Gray Podolak, Naimul Arefin, Hur-E-Jannat Moni and Minxiang Zeng

ACS Appl. Electron. Mater., 2024, 6, 8590
DOI: 10.1021/acsaelm.3c01848

Design, Fabrication, and Optimization of a Printed Ag Nanoparticle-Based Flexible Capacitive Sensor for Automotive IVI Bezel Display Applications

Srinivasan Palanisamy, Muthuramalingam Thangaraj, Khaja Moiduddin, Hisham Alkhalefah, Panagiotis Karmiris-Obratański and Cheng Siong Chin

Sensors, 2023, 23, 4211
DOI: 10.3390/s23094211

Development of Eco-Efficient Smart Electronics for Anticounterfeiting and Shock Detection Based on Printable Inks

Edis Glogic, Romain Futsch, Victor Thenot, Antoine Iglesias, Blandine Joyard-Pitiot, Gael Depres, Aline Rougier and Guido Sonnemann

ACS Sustainable Chem. Eng., 2021, 9, 11691
DOI: 10.1021/acssuschemeng.1c02348

Implementation of Radiating Elements for Radiofrequency Front-Ends by Screen-Printing Techniques for Internet of Things Applications

Imanol Picallo, Hicham Klaina, Peio Lopez-Iturri, Aitor Sánchez, Leire Méndez-Giménez and Francisco Falcone

Sensors, 2019, 19, 3626
DOI: 10.3390/s19163626

Systematic Investigation of Novel, Controlled Low‐Temperature Sintering Processes for Inkjet Printed Silver Nanoparticle Ink

Zehua Chen, Ulrich Gengenbach, Liane Koker, Liyu Huang, Tim P. Mach, Klaus‐Martin Reichert, Richard Thelen and Martin Ungerer

Small, 2024, 20
DOI: 10.1002/smll.202306865

Selective oxidation of vinylbenzenes & acyloins in the presence of silver catalyst using molecular oxygen as terminal oxidant

Sachin Pardeshi, B. Pownthurai, Gokul Ganesan, Hemant Keshari, Yogesh Jadhav and Atul Chaskar

Tetrahedron Letters, 2023, 119, 154409
DOI: 10.1016/j.tetlet.2023.154409

Reactive Silver Oxalate Ink Composition with Enhanced Curing Conditions for Flexible Substrates

Khushbu R. Zope, Denis Cormier and Scott A. Williams

ACS Appl. Mater. Interfaces, 2018, 10, 3830
DOI: 10.1021/acsami.7b19161

Development of a new additive manufacturing platform for direct freeform 3D printing of intrinsically curved flexible membranes

Wen See Tan, Muhammad Aidil Bin Juhari, Qian Shi, Shengyang Chen, Domenico Campolo and Juha Song

Additive Manufacturing, 2020, 36, 101563
DOI: 10.1016/j.addma.2020.101563

Laser Transfer, Printing, and Assembly Techniques for Flexible Electronics

Jing Bian, Laoboyang Zhou, Xiaodong Wan, Chen Zhu, Biao Yang and YongAn Huang

Adv Elect Materials, 2019, 5
DOI: 10.1002/aelm.201800900

Facial fabrication of paper-based flexible electronics with flash foam stamp lithography

XinHua Yao, Tian Jia, ChaoQi Xie, JianZhong Fu and Yong He

Microsyst Technol, 2017, 23, 4419
DOI: 10.1007/s00542-016-3207-6

Smart Contact Lenses for Biosensing Applications

Xin Ma, Samad Ahadian, Song Liu, Jingwen Zhang, Shengnan Liu, Teng Cao, Wenbin Lin, Dong Wu, Natan Roberto de Barros, Mohammad Reza Zare, Sibel Emir Diltemiz, Vadim Jucaud, Yangzhi Zhu, Shiming Zhang, Ethan Banton, Yue Gu, Kewang Nan, Sheng Xu, Mehmet Remzi Dokmeci and Ali Khademhosseini

Advanced Intelligent Systems, 2021, 3
DOI: 10.1002/aisy.202000263

Advances in Printing and Electronics: From Engagement to Commitment

P. Martins, N. Pereira, A. C. Lima, A. Garcia, C. Mendes‐Filipe, R. Policia, V. Correia and S. Lanceros‐Mendez

Adv Funct Materials, 2023, 33
DOI: 10.1002/adfm.202213744

Metal-Based Conducive Nano-Inks: A Review of Synthesis and Characterisation Techniques

Mainak Saha

SSRN Journal, 2022
DOI: 10.2139/ssrn.4210527

Resistive pressure sensors through advanced pad printing techniques for integration in robotic gripper systems

Ahad Khabbaz Bavil, Esma Nur Nebipasagil, Meltem Tekcin and Senem Kursun

Eng. Res. Express, 2025, 7, 015288
DOI: 10.1088/2631-8695/adc16a

Colloidal stability of polypyrrole-ITO conducting inks

Yukihiro Tsugita and Shuichi Maeda

Jpn. J. Appl. Phys., 2022, 61, SE1003
DOI: 10.35848/1347-4065/ac564f

Design of 3D Wireless Power Transfer System Based on 3D Printed Electronics

Tao Hou, Jun Xu, Willemijn S. Elkhuizen, Charlie C. L. Wang, Jiehui Jiang, Jo M. P. Geraedts and Yu Song

IEEE Access, 2019, 7, 94793
DOI: 10.1109/ACCESS.2019.2928948

Fabrication of Low‐cost Screen‐printed Electrode in Paper Using Conductive Inks of Graphite and Silver/Silver Chloride

Ana E. F. Oliveira, Arnaldo C. Pereira and Mayra A. C. de Resende

Electroanalysis, 2023, 35
DOI: 10.1002/elan.202200093

Transfer of rate-thinning and rate-thickening liquids between separating plates and cavities

Jyun-Ting Wu, Marcio S. Carvalho and Satish Kumar

Journal of Non-Newtonian Fluid Mechanics, 2018, 255, 57
DOI: 10.1016/j.jnnfm.2018.02.010

Optimizing silver nanowire synthesis: machine learning improves and predicts yield for a polyol, millifluidic flow reactor

Destiny F. Williams, Nick Rahimi, James E. Smay and Shohreh Hemmati

Appl Nanosci, 2023, 13, 6539
DOI: 10.1007/s13204-023-02959-3

Fabrication of Large Area Sub‐200 nm Conducting Electrode Arrays by Self‐Confinement of Spincoated Metal Nanoparticle Inks

Barbara Horváth, Barbora Křivová, Sami Bolat and Helmut Schift

Adv Materials Technologies, 2019, 4
DOI: 10.1002/admt.201800652

Rapid Fabrication of High-Resolution Flexible Electronics via Nanoparticle Self-Assembly and Transfer Printing

Xuan Li, Lei Chen, Guoxu Yu, Lele Song, Ding Weng, Yuan Ma and Jiadao Wang

Nano Lett., 2024, 24, 1332
DOI: 10.1021/acs.nanolett.3c04316

Anticancerous and antioxidant properties of fabricated silver nanoparticles involving bio-organic framework using medicinal plant Blumea lacera

Pradeep Kumar Pandey, Chinky Gangwar, Bushra Yaseen, Indresh Kumar, Rashmi Nayak, Saurabh Kumar, Radhey Mohan Naik, Monisha Banerjee and Joy Sarkar

Chem. Pap., 2023, 77, 3603
DOI: 10.1007/s11696-023-02723-5

Nanomaterials and printing techniques for 2D and 3D soft electronics

Lorenzo Migliorini, Sara Moon Villa, Tommaso Santaniello and Paolo Milani

Nano Futures, 2022, 6, 032001
DOI: 10.1088/2399-1984/ac74f9

An organic silver complex conductive ink using both decomposition and self-reduction mechanisms in film formation

Wendong Yang, Changhai Wang and Valeria Arrighi

J Mater Sci: Mater Electron, 2018, 29, 2771
DOI: 10.1007/s10854-017-8205-7

Effect of various dispersing agents on the stability of silver microparticle dispersion and the formulation of uniform silver film by laser melting

Alexander Letzel, Elisabeth Maurer, Melanie Meixner, Reinhart Poprawe, Jochen Stollenwerk, Sebastian Hessner, Kathrin Lehmann, Bilal Gökce and Stephan Barcikowski

Journal of Laser Applications, 2016, 28
DOI: 10.2351/1.4955011

Biodegradable polylactic acid emulsion ink based on carbon nanotubes and silver for printed pressure sensors

Maedeh Najafi, Emilie Forestier, Milad Safarpour, Luca Ceseracciu, Arkadiusz Zych, Ahmad Bagheri, Laura Bertolacci, Athanassia Athanassiou and Ilker Bayer

Sci Rep, 2024, 14
DOI: 10.1038/s41598-024-60315-z

Electromigration Reliability in Ag Lines Printed with Nanoparticle Inks: Implications for Printed Electronics

Prabhakar Jepiti, Sukeun Yoon and Jihoon Kim

ACS Appl. Nano Mater., 2022, 5, 2569
DOI: 10.1021/acsanm.1c04144

Design, Fabrication, and Crack Analysis of Silver Track Printed Flexible Sensor for Automobile Infotainment Application

K. P. Srinivasan and T. Muthuramalingam

IEEE Sensors J., 2021, 21, 13910
DOI: 10.1109/JSEN.2021.3071582

An RFID smart structure using inkjet-printed additive manufacturing technology for metal crack characterization

Xiangyu Xie, Haidou Wang, Lihong Dong, Yaya Song, Yuelan Di, Weiling Guo and Jun Zhang

Smart Mater. Struct., 2024, 33, 115042
DOI: 10.1088/1361-665X/ad8798

Modelling of a vacuum metallization patterning method for organic electronics

Thomas Cosnahan, Andrew A.R. Watt and Hazel E. Assender

Surface and Coatings Technology, 2018, 336, 128
DOI: 10.1016/j.surfcoat.2017.09.058

Magnetoresponsive conductive colloidal suspensions with magnetized carbon nanotubes

Ahmed M. Abdalla, Abdel Rahman Abdel Fattah, Suvojit Ghosh and Ishwar K. Puri

Journal of Magnetism and Magnetic Materials, 2017, 421, 292
DOI: 10.1016/j.jmmm.2016.08.031

Enhanced flexibility and environmental durability of copper electrode produced with conductive ink containing silane coupling agents with diamine and ether spacer

Shintaro Sakurai, Takuma Uda and Hideya Kawasaki

J Mater Sci: Mater Electron, 2019, 30, 12130
DOI: 10.1007/s10854-019-01571-y

Reverse Engineering of Thin Films to Nanoparticles by Thermal Deposition for Large-Scale Production of Nanometals

Karthik Paneer Selvam, Zaw Lin, Inoue Hirotaka, Marui Tatsuki, Takeshi Nishikawa and Yasuhiko Hayashi

JNanoR, 2020, 61, 42
DOI: 10.4028/www.scientific.net/JNanoR.61.42

All-Printed Conformal High-Temperature Electronics on Flexible Ceramics

Zheng Li, Scott Scheers, Lu An, Aditya Chivate, Saurabh Khuje, Kevin Xu, Yong Hu, Yulong Huang, Shuquan Chang, Kathy Olenick, John Olenick, Jun Hwan Choi, Chi Zhou and Shenqiang Ren

ACS Appl. Electron. Mater., 2020, 2, 556
DOI: 10.1021/acsaelm.9b00798

Evaluation of One-Staged 3-D Printed Frequency Selective Surface Using Carbon-Fiber-Reinforced Thermoplastic Composite

Rashid Mirzavand, Mohammad Mahdi Honari, Samira Aslanzadeh, Hossein Saghlatoon and Pedram Mousavi

IEEE Trans. Compon., Packag. Manufact. Technol., 2019, 9, 2298
DOI: 10.1109/TCPMT.2019.2917197

Advances in the Development of Liquid Metal-Based Printed Electronic Inks

Lei Wang and Jing Liu

Front. Mater., 2019, 6
DOI: 10.3389/fmats.2019.00303

Shape-Dependent Toxicity of Silver Nanoparticles on Freshwater Cnidarians

Joelle Auclair and François Gagné

Nanomaterials, 2022, 12, 3107
DOI: 10.3390/nano12183107

Advanced anti-counterfeit inks in food packaging: A comprehensive review focusing on functional materials to digital integration

Prachi Jain, Divyanshu Gupta, Harleen Kaur, Suman Singh and Kirtiraj K. Gaikwad

Trends in Food Science & Technology, 2025, 164, 105229
DOI: 10.1016/j.tifs.2025.105229

Nanoimprint meets microfluidics: Development of metal wires from nanoparticle ink filled capillaries

Barbara Horváth, Barbora Křivová and Helmut Schift

Micro and Nano Engineering, 2019, 3, 22
DOI: 10.1016/j.mne.2019.02.004

Laser-induced forward transfer for printed electronics applications

J. M. Fernández-Pradas, P. Sopeña, S. González-Torres, J. Arrese, A. Cirera and P. Serra

Appl. Phys. A, 2018, 124
DOI: 10.1007/s00339-018-1648-8

Interdigitated electrode arrays made by capillary filling and spin coating for UV-sensor fabrication

Barbara Horváth, Ethouba Al Jassin-Al-Hashemi and Helmut Schift

Flex. Print. Electron., 2019, 4, 035002
DOI: 10.1088/2058-8585/ab3777

Reactive Conductive Ink Capable of In Situ and Rapid Synthesis of Conductive Patterns Suitable for Inkjet Printing

Yuehui Wang, Dexi Du, Zhimin Zhou, Hui Xie, Jingze Li and Yuzhen Zhao

Molecules, 2019, 24, 3548
DOI: 10.3390/molecules24193548

Thermal aging of conductive and dielectric inks for flexible printed electronics: Toward reliable strain gauge application

Elsa Dos Santos, Guilhem Rival, Bruce Mioko Deme, Joshua Degraff, Richard Liang, Minh-Quyen Le and Pierre-Jean Cottinet

Materials Today Communications, 2026, 50, 114346
DOI: 10.1016/j.mtcomm.2025.114346

Fabrication and Performance Evolution of AgNP Interdigitated Electrode Touch Sensor for Automotive Infotainment

K. P. Srinivasan and T. Muthuramalingam

Sensors, 2021, 21, 7961
DOI: 10.3390/s21237961

A concise and antioxidative method to prepare copper conductive inks in a two-phase water/xylene system for printed electronics

Yunzi Liu, Wei Zhang, Helong Yu, Zhiyuan Jing, Zhanyong Song and Sijie Wang

Chemical Physics Letters, 2018, 708, 28
DOI: 10.1016/j.cplett.2018.07.057

Gold Nanoparticles: Multifunctional Properties, Synthesis, and Future Prospects

Hatice Duman, Emir Akdaşçi, Furkan Eker, Mikhael Bechelany and Sercan Karav

Nanomaterials, 2024, 14, 1805
DOI: 10.3390/nano14221805

Formulation and Process for Air Stable Zn‐Based Printed Flexible Electronics

Naveed ul Hassan Alvi, Valerio Beni and Jesper Edberg

Advanced Sustainable Systems, 2025, 9
DOI: 10.1002/adsu.202500323

Towards flexible asymmetric MSM structures using Si microwires through contact printing

S Khan, L Lorenzelli and R Dahiya

Semicond. Sci. Technol., 2017, 32, 085013
DOI: 10.1088/1361-6641/aa7b50

Roll‐to‐Roll Fabrication of Solution Processed Electronics

Robert Abbel, Yulia Galagan and Pim Groen

Adv Eng Mater, 2018, 20
DOI: 10.1002/adem.201701190

Size-Tunable Continuous-Seed-Mediated Growth of Silver Nanoparticles in Alkylamine Mixture via the Stepwise Thermal Decomposition of Silver Oxalate

Takanari Togashi, Koki Tsuchida, Shiori Soma, Ryosuke Nozawa, Jun Matsui, Katsuhiko Kanaizuka and Masato Kurihara

Chem. Mater., 2020, 32, 9363
DOI: 10.1021/acs.chemmater.0c03303

New fabrication method for producing reduced graphene oxide flexible electrodes by using a low-power visible laser diode engraving system

A Chuquitarqui, L C Cotet, M Baia, E György, K Magyari, L Barbu-Tudoran, L Baia, M Díaz-González, C Fernández-Sánchez and A Pérez Del Pino

Nanotechnology, 2020, 31, 325402
DOI: 10.1088/1361-6528/ab8d67

Fabrication of screen-printed electrodes: opportunities and challenges

Raghavv Raghavender Suresh, Muthaiyan Lakshmanakumar, J. B. B. Arockia Jayalatha, K. S. Rajan, Swaminathan Sethuraman, Uma Maheswari Krishnan and John Bosco Balaguru Rayappan

J Mater Sci, 2021, 56, 8951
DOI: 10.1007/s10853-020-05499-1

Electromigration and electrical sintering in printed silver from high current at room temperature

Uidam Jung and Ryan Wagner

Flex. Print. Electron., 2024, 9, 025020
DOI: 10.1088/2058-8585/ad5454

Facile in situ formation of high conductive Ag and CuxOy composite films: a role of aqueous spray combustion

Ashritha Salian, Pavan Pujar and Saumen Mandal

J Mater Sci: Mater Electron, 2019, 30, 2888
DOI: 10.1007/s10854-018-00565-6

Living Liquid Metal Composites Embedded with Electrogenic Endospores for Next‐Generation Bioelectronics

Maryam Rezaie, Yang Gao and Seokheun Choi

Adv Funct Materials, 2026, 36
DOI: 10.1002/adfm.202521818

Delivery, Fate, and Mobility of Silver Nanoparticles in Citrus Trees

Yiming Su, Vanessa E. T. M. Ashworth, Nicholas K. Geitner, Mark R. Wiesner, Nichole Ginnan, Philippe Rolshausen, Caroline Roper and David Jassby

ACS Nano, 2020, 14, 2966
DOI: 10.1021/acsnano.9b07733

Unraveling the Active Biomolecules Responsible for the Sustainable Synthesis of Nanoscale Silver Particles through Nuclear Magnetic Resonance Metabolomics

David Asmat-Campos, Ana C. Abreu, Manuel S. Romero-Cano, Josué Urquiaga-Zavaleta, Rafael Contreras-Cáceres, Daniel Delfín-Narciso, Luisa Juárez-Cortijo, Renny Nazario-Naveda, Roger Rengifo-Penadillos and Ignacio Fernández

ACS Sustainable Chem. Eng., 2020, 8, 17816
DOI: 10.1021/acssuschemeng.0c06903

Robust packaging of printed flexible electronics with functional SiOx coatings via cold atmospheric plasma assisted deposition

Venkat Kasi, Muhammad Masud Rana, Sarath Gopalakrishnan, Ulisses Heredia Rivera, Jaewon Yoon, Mukerrem Cakmak and Rahim Rahimi

Applied Surface Science, 2024, 644, 158671
DOI: 10.1016/j.apsusc.2023.158671

Flame-synthesized nickel-silver nanoparticle inks provide high conductivity without sintering

Mohammad Moein Mohammadi, Santosh Srivatsa Gunturi, Shikuan Shao, Shailesh Konda, Raymond D. Buchner and Mark T. Swihart

Chemical Engineering Journal, 2019, 372, 648
DOI: 10.1016/j.cej.2019.04.141

Nebulized jet-based printing of bio-electrical scaffolds for neural tissue engineering: a feasibility study

Miriam Seiti, Paola Ginestra, Rosalba Monica Ferraro, Elisabetta Ceretti and Eleonora Ferraris

Biofabrication, 2020, 12, 025024
DOI: 10.1088/1758-5090/ab71e0

Low-Cost Direct-Writing of Silver-Based Ink for Planar Microwave Circuits up to 10 GHz

Carolina Blanco-Angulo, Andrea Martinez-Lozano, Julia Arias-Rodriguez, Alberto Rodriguez-Martinez, Jose Maria Vicente-Samper, Jose Maria Sabater-Navarro and Ernesto Avila-Navarro

IEEE Access, 2023, 11, 4010
DOI: 10.1109/ACCESS.2023.3234772

Selective ozone treatment of PDMS printing stamps for selective Ag metallization: A new approach to improving resolution in patterned flexible/stretchable electronics

Gemma Francis, Bryan W. Stuart and Hazel E. Assender

Journal of Colloid and Interface Science, 2020, 568, 273
DOI: 10.1016/j.jcis.2020.02.008

Screen Printing of Silver and Carbon Nanotube Composite Inks for Flexible and Reliable Organic Integrated Devices

Xiaowu Tang, Kaibin Wu, Xue Qi, Hyeok-jin Kwon, Rixuan Wang, Zhijun Li, Heqin Ye, Jisu Hong, Hyun Ho Choi, Hoyoul Kong, Nam-Suk Lee, Sooman Lim, Yong Jin Jeong and SeHyun Kim

ACS Appl. Nano Mater., 2022, 5, 4801
DOI: 10.1021/acsanm.1c04317

Effect of the size of silver nanoparticles on SERS signal enhancement

Rui Xiu He, Robert Liang, Peng Peng and Y. Norman Zhou

J Nanopart Res, 2017, 19
DOI: 10.1007/s11051-017-3953-0

Engineering Intricate Microstructures in Electroactive Polymer Ionic Liquid Blends

Ashima Choudhury and Pratyush Dayal

ACS Appl. Polym. Mater., 2026, 8, 2339
DOI: 10.1021/acsapm.5c04497

Direct Ink Writing of Flexible Electronics on Paper Substrate with Graphene/Polypyrrole/Carbon Black Ink

Yiming Chen, Lijie Zhou, Jing Wei, Changtong Mei, Shaohua Jiang, Mingzhu Pan and Changyan Xu

Journal of Elec Materi, 2019, 48, 3157
DOI: 10.1007/s11664-019-07085-x

Advancing sustainable RF energy harvesting for wearable electronics with 2.45 GHz textile-printed rectennas

J. Tavares, J. Lacik, P. Pinho, Z. Raida and H. Alves

Sci Rep, 2025, 15
DOI: 10.1038/s41598-025-09966-0

Green synthesis and bioactivity of peach hibiscus silver nanoparticles

Geetha Kezhukut Ravunni, Mercy Madhumitha Kings, Anbumalarmathi Jeyabaskaran, Aruna Sharmili Sundararaj, Mani Divya and Sekar Vijayakumar

Sustainable Chemistry One World, 2025, 8, 100113
DOI: 10.1016/j.scowo.2025.100113

Facile synthesis of nearly monodisperse AgCu alloy nanoparticles with synergistic effect against oxidation and electromigration

Qianqian Dou, Yang Li, Ka Wai Wong and Ka Ming Ng

J. Mater. Res., 2019, 34, 2095
DOI: 10.1557/jmr.2019.71

Flexible and Stretchable Strategies for Electronic Skins: Materials, Structure, and Integration

Zuqing Yuan, Su-Ting Han, Wenchao Gao and Caofeng Pan

ACS Appl. Electron. Mater., 2022, 4, 1
DOI: 10.1021/acsaelm.1c00025

Development of Lab-made Flexible Screen-printed Electrode based on S-Graphene Enriched with AuNPs and CuO for Electrochemical Detection of Tyrosine

Irem Duran, Selen Uruc, Ebrar Dokur, Ozge Gorduk and Yucel Sahin

J. Electrochem. Soc., 2024, 171, 057509
DOI: 10.1149/1945-7111/ad4aca

Wearable Arduino-Based Electronic Interactive Tattoo: A New Type of High-Tech Humanized Emotional Expression for Electronic Skin

Chuanwen Luo, Yan Zhang, Juan Zhang, Linyuan Hui, Ruisi Qi, Yuxiang Han, Xiang Sun, Yifan Li, Yufei Wei, Yiwen Zhang, Haoying Sun, Ning Li and Bo Zhang

Sensors, 2025, 25, 2153
DOI: 10.3390/s25072153

Screen-Printing vs Additive Manufacturing Approaches: Recent Aspects and Trends Involving the Fabrication of Electrochemical Sensors

Luiz O. Orzari, Cristiane Kalinke, Habdias A. Silva-Neto, Danielly S. Rocha, Jéssica R. Camargo, Wendell K.T. Coltro and Bruno C. Janegitz

Anal. Chem., 2025, 97, 1482
DOI: 10.1021/acs.analchem.4c05786

Impact of loosenins on the enzymatic preparation of cellulose nanocrystals

Ylenia Jabalera, Deepika Dahiya, Carlos David Ordóñez Cencerrado, Antonio Jesus Caballero, Nerea Zaldua, Arantxa Eceiza, Emma R. Master and Raul Perez-Jimenez

Carbohydrate Polymers, 2025, 357, 123469
DOI: 10.1016/j.carbpol.2025.123469

Effect of electron-beam processing on structure of electroexplosive electroerosion resistant coatings of CuO-Ag system

D A Romanov, S V Moskovskii, K V Sosnin, V E Gromov, Yu F Ivanov, A P Semin and V A Bataev

Mater. Res. Express, 2019, 6, 085077
DOI: 10.1088/2053-1591/ab220a

Highly conductive copper films prepared by multilayer sintering of nanoparticles synthesized via arc discharge

Qingqing Fu, Wen Li and Frank Einar Kruis

Nanotechnology, 2023, 34, 225601
DOI: 10.1088/1361-6528/acbd1f

The Resistor Network Approach to Modeling Screen-Printed Silver Ink Under Uniaxial Stretch

Justin H. Chow and Suresh K. Sitaraman

Journal of Electronic Packaging, 2023, 145
DOI: 10.1115/1.4063485

Interface Modified Flexible Printed Conductive Films via Ag2O Nanoparticle Decorated Ag Flake Inks

Yuhuan Meng, Taichong Ma, Felippe Jose Pavinatto and John Devin MacKenzie

ACS Appl. Mater. Interfaces, 2019, 11, 9190
DOI: 10.1021/acsami.8b20057

Recent advances and future challenges in printed batteries

C.M. Costa, R. Gonçalves and S. Lanceros-Méndez

Energy Storage Materials, 2020, 28, 216
DOI: 10.1016/j.ensm.2020.03.012

Wearable Printed Temperature Sensors: Short Review on Latest Advances for Biomedical Applications

Saleem Khan, Shaukat Ali, Arshad Khan and Amine Bermak

IEEE Rev. Biomed. Eng., 2023, 16, 152
DOI: 10.1109/RBME.2021.3121480

Inkjet-printable and low-temperature curable Ag–Ag2O mixed-phase conductive nanoink for flexible electronic applications

Mitta Divya and Subho Dasgupta

Appl Nanosci, 2022, 12, 2945
DOI: 10.1007/s13204-022-02602-7

Flexible inorganic bioelectronics

Ying Chen, Yingchao Zhang, Ziwei Liang, Yu Cao, Zhiyuan Han and Xue Feng

npj Flex Electron, 2020, 4
DOI: 10.1038/s41528-020-0065-1

Cytosine-Rich Oligonucleotide and Electrochemically Reduced Graphene Oxide Nanocomposite for Ultrasensitive Electrochemical Ag+ Sensing

Nasir Abbas, Seung Joo Jang and Tae Hyun Kim

Nanomaterials, 2024, 14, 775
DOI: 10.3390/nano14090775

Humic acid assisted chemical synthesis of silver nanoparticles for inkjet printing of flexible circuits

Yueyue Hao, Zesheng Xu, Jian Gao, Kaiyun Wu, Jingyu Liu and Jing Luo

J Mater Sci: Mater Electron, 2019, 30, 20400
DOI: 10.1007/s10854-019-02372-z

Structure and electrical erosion resistance of an electro-explosive coating of the CuO–Ag system

D A Romanov, S V Moskovskii, K V Sosnin, V E Gromov and V A Bataev

Mater. Res. Express, 2019, 6, 055042
DOI: 10.1088/2053-1591/ab0672

Silver Nanowire Synthesis and Strategies for Fabricating Transparent Conducting Electrodes

Amit Kumar, Muhammad Omar Shaikh and Cheng-Hsin Chuang

Nanomaterials, 2021, 11, 693
DOI: 10.3390/nano11030693

Fabric based printed-distributed battery for wearable e-textiles: a review

Adnan E. Ali, Varun Jeoti and Goran M. Stojanović

Science and Technology of Advanced Materials, 2021, 22, 772
DOI: 10.1080/14686996.2021.1962203

Wirelessly Powered Sensing Fertilizer for Precision and Sustainable Agriculture

Takaaki Kasuga, Ami Mizui, Hirotaka Koga and Masaya Nogi

Advanced Sustainable Systems, 2024, 8
DOI: 10.1002/adsu.202300314

Graphene quantum dots: Effective stabilizing agents for enhanced graphene oxide colloidal dispersions

Mahtab Mohammadi, Amir Rezvani-Moghaddam and Hossein Roghani-Mamaqani

Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2025, 712, 136447
DOI: 10.1016/j.colsurfa.2025.136447

Magnetic field strength controlled liquid phase syntheses of ferromagnetic metal nanowire

Shohei Shiomi, Siti Rahmah Shamsuri and Eiichiro Matsubara

Nanotechnology, 2020, 31, 365602
DOI: 10.1088/1361-6528/ab93ef

Detailed Kinetic and Mechanistic Study for the Preparation of Silver Nanoparticles by a Chemical Reduction Method in the Presence of a Neuroleptic Agent (Gabapentin) at an Alkaline pH and its Characterization

Bushra Yaseen, Chinky Gangwar, Indresh Kumar, Joy Sarkar and Radhey Mohan Naik

ACS Omega, 2022, 7, 5739
DOI: 10.1021/acsomega.1c05499

Recycling textile waste into innovative carbon black and applications to smart textiles: a sustainable approach

Aamer Khan, Muhammad Awais and Muhammad Mohsin

Biomass Conv. Bioref., 2024, 14, 23485
DOI: 10.1007/s13399-023-04475-4

Direct surface in-situ activation for electroless deposition of robust conductive copper patterns on polyimide film

Yuefeng Wang, Yan Hong, Qingguo Chen, Guoyun Zhou, Wei He, Zhengping Gao, Xin Zhou, Weihua Zhang, Xinhong Su and Rui Sun

Journal of the Taiwan Institute of Chemical Engineers, 2019, 97, 450
DOI: 10.1016/j.jtice.2019.02.014

3D Printed Fingernail Antennas for 5G Applications

Peter Njogu, Benito Sanz-Izquierdo, Ahmed Elibiary, Sung Yun Jun, Zhijiao Chen and David Bird

IEEE Access, 2020, 8, 228711
DOI: 10.1109/ACCESS.2020.3043045

Electrically Conductive 2D Material Coatings for Flexible and Stretchable Electronics: A Comparative Review of Graphenes and MXenes

Vicente Orts Mercadillo, Kai Chio Chan, Mario Caironi, Athanassia Athanassiou, Ian A. Kinloch, Mark Bissett and Pietro Cataldi

Adv Funct Materials, 2022, 32
DOI: 10.1002/adfm.202204772

大物性差异多材料激光增材制造界面研究进展（特邀）

孙小婧 Sun Xiaojing, 袁丁 Yuan Ding, 韦超 Wei Chao, 杨潇 Yang Xiao and 李琳 Li Lin

Chin. J. Laser, 2024, 51, 0102003
DOI: 10.3788/CJL231414

Ohmic contact formation for inkjet-printed nanoparticle copper inks on highly doped GaAs

Nastaran Hayati-Roodbari, Alexander Wheeldon, Carina Hendler, Alexander Fian and Roman Trattnig

Nanotechnology, 2021, 32, 225205
DOI: 10.1088/1361-6528/abe902

Improved Low Temperature Sinter Bonding Using Silver Nanocube Superlattices

Maxime Bronchy, Lucien Roach, Laurent Mendizabal, Céline Feautrier, Etienne Durand, Jean-Marc Heintz, Etienne Duguet and Mona Tréguer-Delapierre

J. Phys. Chem. C, 2022, 126, 1644
DOI: 10.1021/acs.jpcc.1c09125

Dual-Mode Silver Itaconate Conductive Ink: Bridging Ultra-Precise Electronics and Flexible Sensors via Tunable Decomposition Pathways

Wendong Yang, Xiaoyuan Zhang, Yuhang Shao, Yu Wang, Lixin Mo and Emil J. W. List-Kratochvil

Langmuir, 2025, 41, 16477
DOI: 10.1021/acs.langmuir.5c01827

3D Porous Mixed‐Valent Manganese Oxide Nanosheets Electrodeposited onto Flexible Ag‐CNT Textiles for Highly Improved Capacitive Performances

Wen‐Yin Ko, Chia‐Ching Chung and Kuan‐Jiuh Lin

ChemistrySelect, 2017, 2, 11503
DOI: 10.1002/slct.201702248

Mechanically Flexible Conductors for Stretchable and Wearable E‐Skin and E‐Textile Devices

Binghao Wang and Antonio Facchetti

Advanced Materials, 2019, 31
DOI: 10.1002/adma.201901408

Silver Nanoparticles Based Ink with Moderate Sintering in Flexible and Printed Electronics

Lixin Mo, Zhenxin Guo, Li Yang, Qingqing Zhang, Yi Fang, Zhiqing Xin, Zheng Chen, Kun Hu, Lu Han and Luhai Li

IJMS, 2019, 20, 2124
DOI: 10.3390/ijms20092124

Effects of Curing Temperature on Bending Durability of Inkjet-Printed Flexible Silver Electrode

Nam Woon Kim, Duck-Gyu Lee, Kyung-Shik Kim and Shin Hur

Nanomaterials, 2020, 10, 2463
DOI: 10.3390/nano10122463

One-step chemical oxidation preparation of polypyrrole-zirconia colloidal dispersions in aqueous solution

Yukihiro Tsugita, Kaiki Noma, Tetsu Hyodo and Shuichi Maeda

Progress in Organic Coatings, 2025, 206, 109355
DOI: 10.1016/j.porgcoat.2025.109355

Printed Crack Detection Sensors for SHM Based on Direct Ink Write Additive Manufacturing

Artur Kurnyta, Klaudia Wrąbel, Marta Baran and Andrzej Leski

Materials, 2026, 19, 870
DOI: 10.3390/ma19050870