Flexible electrochemical biosensors for healthcare monitoring

Jinho Yoon, Hyeon-Yeol Cho, Minkyu Shin, Hye Kyu Choi, Taek Lee and Jeong-Woo Choi

J. Mater. Chem. B, 2020, 8, 7303
DOI: 10.1039/D0TB01325K

Hierarchical Nafion enhanced carbon aerogels for sensing applications

Bo Weng, Ailing Ding, Yuqing Liu, Jianglin Diao, Joselito Razal, King Tong Lau, Roderick Shepherd, Changming Li and Jun Chen

Nanoscale, 2016, 8, 3416
DOI: 10.1039/C5NR08631K

A compact imaging spectroscopic system for biomolecular detections on plasmonic chips

Shu-Cheng Lo, En-Hung Lin, Pei-Kuen Wei and Wan-Shao Tsai

Analyst, 2016, 141, 6126
DOI: 10.1039/C6AN01434H

Advances in nanomaterial application in enzyme-based electrochemical biosensors: a review

I. S. Kucherenko, O. O. Soldatkin, D. Yu. Kucherenko, O. V. Soldatkina and S. V. Dzyadevych

Nanoscale Adv., 2019, 1, 4560
DOI: 10.1039/C9NA00491B

Recent developments and directions in printed nanomaterials

Hyung Woo Choi, Tianlei Zhou, Madhusudan Singh and Ghassan E. Jabbour

Nanoscale, 2015, 7, 3338
DOI: 10.1039/C4NR03915G

Printable biosensors towards next-generation point-of-care testing: paper substrate as an example

Yaolin Liu, Sheng Lu, Zhiheng Zhang, Zhugen Yang, Xiaolin Cui and Guozhen Liu

Lab Chip, 2023, 23, 3328
DOI: 10.1039/D3LC00038A

Graphene-based aptasensors: from molecule–interface interactions to sensor design and biomedical diagnostics

Li Wang, Aiguo Wu and Gang Wei

Analyst, 2018, 143, 1526
DOI: 10.1039/C8AN00081F

Developments in conducting polymer fibres: from established spinning methods toward advanced applications

Azadeh Mirabedini, Javad Foroughi and Gordon G. Wallace

RSC Adv., 2016, 6, 44687
DOI: 10.1039/C6RA05626A

Functional nanostructures for enzyme based biosensors: properties, fabrication and applications

Ali Othman, Anahita Karimi and Silvana Andreescu

J. Mater. Chem. B, 2016, 4, 7178
DOI: 10.1039/C6TB02009G

Inkjet printing for biosensor fabrication: combining chemistry and technology for advanced manufacturing

Jia Li, Fabrice Rossignol and Joanne Macdonald

Lab Chip, 2015, 15, 2538
DOI: 10.1039/C5LC00235D

Printable organic thin film transistors for glucose detection incorporating inkjet-printing of the enzyme recognition element

D. Elkington, M. Wasson, W. Belcher, P. C. Dastoor and X. Zhou

Applied Physics Letters, 2015, 106
DOI: 10.1063/1.4923397

Recent Development of Morphology Controlled Conducting Polymer Nanomaterial-Based Biosensor

Sunghun Cho and Jun Seop Lee

Applied Sciences, 2020, 10, 5889
DOI: 10.3390/app10175889

Inkjet Printing of Polypyrrole Electroconductive Layers Based on Direct Inks Freezing and Their Use in Textile Solid-State Supercapacitors

Zbigniew Stempien, Mohmmad Khalid, Marcin Kozanecki, Paulina Filipczak, Angelika Wrzesińska, Ewa Korzeniewska and Elżbieta Sąsiadek

Materials, 2021, 14, 3577
DOI: 10.3390/ma14133577

Fast and Efficient Fabrication of Functional Electronic Devices through Grayscale Digital Light Processing 3D Printing

Farzad Gholami, Liang Yue, Mingzhe Li, Ayush Jain, Akhlak Mahmood, Marcus Fratarcangeli, Rampi Ramprasad and H. Jerry Qi

Advanced Materials, 2024, 36
DOI: 10.1002/adma.202408774

3D printing of conductive organic polymers: challenges and opportunities towards dynamic and electrically responsive materials

Angelo Martinelli, Andrea Nitti, Giorgio Giannotta, Riccardo Po and Dario Pasini

Materials Today Chemistry, 2022, 26, 101135
DOI: 10.1016/j.mtchem.2022.101135

Polymeric Materials for Printed-Based Electroanalytical (Bio)Applications

Stefano Cinti

Chemosensors, 2017, 5, 31
DOI: 10.3390/chemosensors5040031

The Effect of Electrostatic Force between the Nanoparticles and the Substrate on the Uniform Assembly of Inkjet-Printed Nanoparticles

Hongki Kang and Yoonkey Nam

J. Flex. Print. Electron., 2022, 1, 79
DOI: 10.56767/jfpe.2022.1.1.79

Exploring Conducting Polymers as a Promising Alternative for Electrochromic Devices

Tuan Van Nguyen, Quyet Van Le, Shengjie Peng, Zhengfei Dai, Sang Hyun Ahn and Soo Young Kim

Adv Materials Technologies, 2023, 8
DOI: 10.1002/admt.202300474

Voltage-based balancing technique for half printed Wheatstone bridges

Michela Borghetti, Emilio Sardini and Mauro Serpelloni

Measurement, 2026, 260, 119809
DOI: 10.1016/j.measurement.2025.119809

Inkjet‐Printing: A New Fabrication Technology for Organic Transistors

Giorgio Mattana, Alberto Loi, Marion Woytasik, Massimo Barbaro, Vincent Noël and Benoît Piro

Adv Materials Technologies, 2017, 2
DOI: 10.1002/admt.201700063

An anionic spherical polyelectrolyte brushes-driven approach to synthesize conductive composites

Yu Huang, Zhan Zhan, Xiongzhi Zhang, Houbin Li and Chi Huang

J Nanopart Res, 2015, 17
DOI: 10.1007/s11051-015-3146-7

Polypyrrole-Silicon Nanowire Arrays for Controlled Intracellular Cargo Delivery

Daniel M. Loh, Matthew Nava and Daniel G. Nocera

Nano Lett., 2022, 22, 366
DOI: 10.1021/acs.nanolett.1c04033

Protein jetting-based printing: principles and applications

Ana R. Sampaio, Lucília Domingues and Tatiana Q. Aguiar

Prog Addit Manuf, 2026, 11, 1465
DOI: 10.1007/s40964-025-01422-9

Electronic Materials, Devices, and Signals in Electrochemical Sensors

Yue Cui

IEEE Trans. Electron Devices, 2017, 64, 2467
DOI: 10.1109/TED.2017.2691045

Optimised properties of conductive polyaniline-polyvinyl alcohol ink painted on paper for ductile pressure sensor with reduced electrical drift

Jayanta Das, Debadrita Dasgupta, Krishna Deb and Biswajit Saha

Materials Science and Engineering: B, 2025, 311, 117850
DOI: 10.1016/j.mseb.2024.117850

Organic Bioelectronics: Diversity of Electronics Along with Biosciences

Syed Abdul Moiz, Mohammed Saleh Alshaikh and Ahmed N. M. Alahmadi

Biosensors, 2025, 15, 587
DOI: 10.3390/bios15090587

Colloids of polypyrrole nanotubes/nanorods: A promising conducting ink

Yu Li, Patrycja Bober, Dogukan H. Apaydin, Tomáš Syrový, Niyazi Serdar Sariciftci, Jiřina Hromádková, Irina Sapurina, Miroslava Trchová and Jaroslav Stejskal

Synthetic Metals, 2016, 221, 67
DOI: 10.1016/j.synthmet.2016.10.007

Multi-layer PEDOT:PSS/Pd composite electrodes for hydrazine oxidation

Elena G. Tolstopjatova, Veniamin V. Kondratiev and Svetlana N. Eliseeva

J Solid State Electrochem, 2015, 19, 2951
DOI: 10.1007/s10008-015-2907-7

Polypyrrole nanotubes: The tuning of morphology and conductivity

Irina Sapurina, Yu Li, Elizaveta Alekseeva, Patrycja Bober, Miroslava Trchová, Zuzana Morávková and Jaroslav Stejskal

Polymer, 2017, 113, 247
DOI: 10.1016/j.polymer.2017.02.064

Hot Embossing Process Technology Forming Arbitrary Patterns in Real Time

Myeongjin Kim, Jaewon Ahn, Donghyun Kim, Junseong Bae and Dongwon Yun

Adv Materials Technologies, 2020, 5
DOI: 10.1002/admt.202000459

Inkjet Printing: A Viable Technology for Biosensor Fabrication

Arif Hussain, Naseem Abbas and Ahsan Ali

Chemosensors, 2022, 10, 103
DOI: 10.3390/chemosensors10030103

Digital Printing and Functionalization of Surfaces for Biosensing Applications

Marianneza Chatzipetrou and Ioanna Zergioti

IEEE Sensors J., 2021, 21, 22182
DOI: 10.1109/JSEN.2021.3108703

Ink-Jet Printing of Chemosensing Layers Based on Surface-Functionalized Silica Nanoparticles

D. S. Ionov, G. A. Yurasik, Yu. N. Kononevich, N. M. Surin, E. A. Svidchenko, V. A. Sazhnikov, A. M. Muzafarov and M. V. Alfimov

Nanotechnol Russia, 2017, 12, 338
DOI: 10.1134/S1995078017040103

Design Strategies for Strain‐Insensitive Wearable Healthcare Sensors and Perspective Based on the Seebeck Coefficient

Yangyang Xin, Jian Zhou, Hussein Nesser and Gilles Lubineau

Adv Elect Materials, 2023, 9
DOI: 10.1002/aelm.202200534

Printable devices for neurotechnology

Rita Matta, David Moreau and Rodney O’Connor

Front. Neurosci., 2024, 18
DOI: 10.3389/fnins.2024.1332827

Additive Manufacturable Materials for Electrochemical Biosensor Electrodes

Moe Elbadawi, Jun Jie Ong, Thomas D. Pollard, Simon Gaisford and Abdul W. Basit

Adv Funct Materials, 2021, 31
DOI: 10.1002/adfm.202006407

Novel Method for Balancing Full Wheatstone Bridge for High-Tolerance Resistive Sensors

Michela Borghetti, Oscar Casas, Emilio Sardini and Mauro Serpelloni

IEEE Trans. Instrum. Meas., 2025, 74, 1
DOI: 10.1109/TIM.2025.3586341

Scalable Fabrication of Electrochemical Sensors Via Inkjet Printing of Functionalized Graphene for Pesticide Detection

Martin‐Alex Nalepa, Lueda Kulla, Petr Jakubec, Vítězslav Hrubý, David Panáček, Ivan Dědek, Majlinda Vasjari and Michal Otyepka

Adv Materials Technologies, 2026, 11
DOI: 10.1002/admt.202501765

Bioinks and biofabrication techniques for biosensors development: A review

Róisín Byrne, Amanda Carrico, Mariagrazia Lettieri, Athira K. Rajan, Robert J. Forster and Loanda R. Cumba

Materials Today Bio, 2024, 28, 101185
DOI: 10.1016/j.mtbio.2024.101185

Conducting Polymers, Hydrogels and Their Composites: Preparation, Properties and Bioapplications

Monika Tomczykowa and Marta Plonska-Brzezinska

Polymers, 2019, 11, 350
DOI: 10.3390/polym11020350

Application of 3D Printing Technology in Construction of Electrochemical Sensing Device

湘云林

AAC, 2022, 12, 360
DOI: 10.12677/AAC.2022.124043

Study of physical properties of cold welding epoxy matrix with polypyrrole inclusions

Juan José Reyes Salgado, Pablo Marco Trejo García, Laura Elvira Serrano de la Rosa and Emmanuel Eduardo Huelitl Ocelotl

MRS Advances, 2023, 8, 1224
DOI: 10.1557/s43580-023-00668-1

Correlation between the catalytic and electrocatalytic properties of nitrogen-doped carbon nanoonions and the polarity of the carbon surface: Experimental and theoretical investigations

Grzegorz S. Szymański, Marek Wiśniewski, Piotr Olejnik, Stanisław Koter, Edison Castro, Luis Echegoyen, Artur P. Terzyk and Marta E. Plonska-Brzezinska

Carbon, 2019, 151, 120
DOI: 10.1016/j.carbon.2019.05.069

Laser-Induced Graphene-Based Enzymatic Biosensor for Glucose Detection

Kalpana Settu, Pin-Tzu Chiu and Yu-Ming Huang

Polymers, 2021, 13, 2795
DOI: 10.3390/polym13162795

Nanomaterial‐Based Inkjet Printing for Electrochemical Sensing

David Panáček, Massimo Urban, Alessandro Silvestri, Ivan Dědek, Martin‐Alex Nalepa, Arben Merkoçi, Maurizio Prato and Michal Otyepka

Small, 2026, 22
DOI: 10.1002/smll.202513028

Organic Bioelectronics: Materials and Biocompatibility

Krishna Feron, Rebecca Lim, Connor Sherwood, Angela Keynes, Alan Brichta and Paul C. Dastoor

IJMS, 2018, 19, 2382
DOI: 10.3390/ijms19082382

Flexible and wearable electrochemical biosensors based on two-dimensional materials: Recent developments

Minu Mathew, Sithara Radhakrishnan, Antara Vaidyanathan, Brahmananda Chakraborty and Chandra Sekhar Rout

Anal Bioanal Chem, 2021, 413, 727
DOI: 10.1007/s00216-020-03002-y

Conducting Polymer Based Nanobiosensors

Chul Park, Changsoo Lee and Oh Kwon

Polymers, 2016, 8, 249
DOI: 10.3390/polym8070249

One-Step Interface Engineering for All-Inkjet-Printed, All-Organic Components in Transparent, Flexible Transistors and Inverters: Polymer Binding

Jewook Ha, Seungjun Chung, Mingyuan Pei, Kilwon Cho, Hoichang Yang and Yongtaek Hong

ACS Appl. Mater. Interfaces, 2017, 9, 8819
DOI: 10.1021/acsami.6b14702

Recent Developments and Implementations of Conductive Polymer-Based Flexible Devices in Sensing Applications

Vinh Van Tran, Sanghyuck Lee, Daeho Lee and Thanh-Hai Le

Polymers, 2022, 14, 3730
DOI: 10.3390/polym14183730

Quartz Crystal Microbalance Detection of Aliphatic Alcohol Vapors via In Situ Polymerized Polypyrrole Film: Experimental Insights and Molecular Dynamics Simulations

Nagy L. Torad, Eman A. Zaki, Tarek M. Madkour, Mayyada M. H. El‐Sayed, Wael A. Amer, Mohammad Abu Haija and Mohamad M. Ayad

ChemistrySelect, 2025, 10
DOI: 10.1002/slct.202501257

A simple route to Develop Highly porous Nano Polypyrrole/Reduced Graphene Oxide Composite film for Selective Determination of Dopamine

Abraham Daniel Arulraj, Arumugam Arunkumar, Muthunanthevar Vijayan, Kamatchirajan Balaji Viswanath and Vairathevar Sivasamy Vasantha

Electrochimica Acta, 2016, 206, 77
DOI: 10.1016/j.electacta.2016.04.134

How Anionic Dopants Impact the Electrochemical Additive Manufacturing of Polypyrrole

Bingbing Wang, Bin Cheng, Yutong Zhang, Xiongri Gan, Yihong Wu, Igor Zhitomirsky, Yabin Yang and Kaiyuan Shi

ACS Appl. Polym. Mater., 2023, 5, 7642
DOI: 10.1021/acsapm.3c01579

Fabrication and Use of Organic Electrochemical Transistors for Sensing of Metabolites in Aqueous Media

Benoît Piro, Giorgio Mattana, Samia Zrig, Guillaume Anquetin, Nicolas Battaglini, Dany Capitao, Antoine Maurin and Steeve Reisberg

Applied Sciences, 2018, 8, 928
DOI: 10.3390/app8060928

Synthesis of palladium nanocubes decorated polypyrrole nanotubes and its application for electrochemical sensing

Xinjin Zhang, Qinglin Sheng and Jianbin Zheng

J IRAN CHEM SOC, 2019, 16, 1061
DOI: 10.1007/s13738-018-01578-y

Analytical performance of paper electro-biosensor detection platform for point-of-care diagnosis

ChangBing Tao, Ching-Shu Yen, Jen-Tsai Liu and Ching-Jung Chen

Cellulose, 2016, 23, 3799
DOI: 10.1007/s10570-016-1046-3

Development strategies of conducting polymer-based electrochemical biosensors for virus biomarkers: Potential for rapid COVID-19 detection

Vinh Van Tran, Nhu Hoa Thi Tran, Hye Suk Hwang and Mincheol Chang

Biosensors and Bioelectronics, 2021, 182, 113192
DOI: 10.1016/j.bios.2021.113192

The design, fabrication, and applications of flexible biosensing devices

Meng Xu, Dora Obodo and Vamsi K. Yadavalli

Biosensors and Bioelectronics, 2019, 124-125, 96
DOI: 10.1016/j.bios.2018.10.019

A Conductive Nanowire‐Mesh Biosensor for Ultrasensitive Detection of Serum C‐Reactive Protein in Melanoma

Zuan‐Tao Lin, Yaxi Li, Jianhua Gu, Huie Wang, Zhuan Zhu, Xia Hong, Zijing Zhang, Qinqin Lu, Jingyi Qiu, Xifan Wang, Jiming Bao and Tianfu Wu

Adv Funct Materials, 2018, 28
DOI: 10.1002/adfm.201802482

Printed microfluidic filter for heparinized blood

Stanley E. R. Bilatto, Nouran Y. Adly, Daniel S. Correa, Bernhard Wolfrum, Andreas Offenhäusser and Alexey Yakushenko

Biomicrofluidics, 2017, 11
DOI: 10.1063/1.4982963

Resistive Sensors for Smart Objects: Analysis on Printing Techniques

Paolo Bellitti, Michela Borghetti, Edoardo Cantu, Emilio Sardini and Mauro Serpelloni

IEEE Trans. Instrum. Meas., 2022, 71, 1
DOI: 10.1109/TIM.2022.3181941

Cellulose-based Biosensor for Bio-molecules Detection in Medical Diagnosis: A Mini-Review

Minmin Chang, Tao Song, Xinxin Liu, Qixuan Lin, Bei He and Junli Ren

CMC, 2020, 27, 4593
DOI: 10.2174/0929867327666200221145543

Development and Applications of Polypyrrole‐Based Conductive Inks: An Overview

Suresh Meenakshy, John Jesslyn and Saithalavi Anas

Adv Materials Technologies, 2025, 10
DOI: 10.1002/admt.202401216

Printed Organic Transistor-based Biosensors for Non-invasive Sweat Analysis

Kuniaki Nagamine, Ayako Nomura, Yusuke Ichimura, Ryota Izawa, Shiori Sasaki, Hiroyuki Furusawa, Hiroyuki Matsui and Shizuo Tokito

ANAL. SCI., 2020, 36, 291
DOI: 10.2116/analsci.19R007

Inkjet Printing with (Semi)conductive Conjugated Polymers: A Review

Daniil A. Lukyanov and Oleg V. Levin

ChemEngineering, 2024, 8, 53
DOI: 10.3390/chemengineering8030053