High surface area hierarchical porous Al2O3 prepared by the integration of sol–gel transition and phase separation

A. R. Passos, S. H. Pulcinelli, V. Briois and C. V. Santilli

RSC Adv., 2016, 6, 57217
DOI: 10.1039/C6RA11477F

A green fabrication strategy for MgAl2O4 foams with tunable morphology

Shuvendu Tripathy, Santimoy Khilari, Deepash Shekhar Saini and Debasis Bhattacharya

RSC Adv., 2016, 6, 33259
DOI: 10.1039/C6RA01255H

Effects of NaCl concentration on wear–corrosion behavior of SAF 2507 super duplex stainless steel

Gaofeng Han, Pengfei Jiang, Jianzhang Wang and Fengyuan Yan

RSC Adv., 2016, 6, 111261
DOI: 10.1039/C6RA23030J

Fracture toughness of wet and dry particulate materials comprised of colloidal sized particles: role of plastic deformation

Mitchell L. Sesso and George V. Franks

Soft Matter, 2017, 13, 4746
DOI: 10.1039/C7SM00814G

Highly porous (La1/5Nd1/5Sm1/5Gd1/5Yb1/5)2Zr2O7 ceramics with ultra-low thermal conductivity

Debao Liu, Zhiliang Zhou, Yiguang Wang and Baosheng Xu

Ceramics International, 2022, 48, 26400
DOI: 10.1016/j.ceramint.2022.05.330

Design and formulation of polyurethane foam used for porous alumina ceramics

Xinyue Tang, Zaijuan Zhang, Xiaoyan Zhang, Wenlong Huo, Jingjing Liu, Shu Yan and Jinlong Yang

J Polym Res, 2018, 25
DOI: 10.1007/s10965-018-1535-1

Insight on Methane Foam Stability and Texture via Adsorption of Surfactants on Oppositely Charged Nanoparticles

Mina Doroudian Rad, Ali Telmadarreie, Long Xu, Mingzhe Dong and Steven L. Bryant

Langmuir, 2018, 34, 14274
DOI: 10.1021/acs.langmuir.8b01966

Graphite and white graphite (h-BN) reinforced metal matrix composites and cermets: a review of processing and properties

Atteeq Uz Zaman, Muhammad Ramzan Abdul Karim, Azhar Hussain, Muhammad Awais Khan and Ehsan Ul Haq

Advances in Materials and Processing Technologies, 2025, 1
DOI: 10.1080/2374068X.2025.2594440

Soot particles at the aqueous interface and effects on foams stability

E. Santini, E. Guzmán, F. Ravera, A. Ciajolo, M. Alfè, L. Liggieri and M. Ferrari

Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2012, 413, 216
DOI: 10.1016/j.colsurfa.2012.02.028

Facile Method for Preparing Hierarchical Al2O3–Glass Foam Ceramics with Superior Thermal Insulating Property

Chao Wang, Yedong Rong, Boran Zhang and Jinlong Yang

Langmuir, 2022, 38, 1141
DOI: 10.1021/acs.langmuir.1c02791

Successful preparation of self-setting particle-stabilized zeolite 13X foams

Jang-Hoon HA, Da-Woon JUNG, Rizwan AHMAD and In-Hyuck SONG

J. Ceram. Soc. Japan, 2014, 122, 276
DOI: 10.2109/jcersj2.122.276

Generation and stability of bubbles in a cement based slurry

Pauline Petit, Isabelle Javierre, Pierre-Henri Jézéquel and Anne-Laure Biance

Cement and Concrete Research, 2014, 60, 37
DOI: 10.1016/j.cemconres.2014.02.008

Colloidal processing: enabling complex shaped ceramics with unique multiscale structures

George V. Franks, Carolina Tallon, André R. Studart, Mitchell L. Sesso and Silvia Leo

J Am Ceram Soc., 2017, 100, 458
DOI: 10.1111/jace.14705

Producing Large Complex‐Shaped Ceramic Particle Stabilized Foams

Chayuda Chuanuwatanakul, Carolina Tallon, David E. Dunstan, George V. Franks and L. Gauckler

J. Am. Ceram. Soc., 2013, 96, 1407
DOI: 10.1111/jace.12294

Particle-stabilized ultra-low density zirconia toughened alumina foams

Rizwan Ahmad, Jang-Hoon Ha and In-Hyuck Song

Journal of the European Ceramic Society, 2013, 33, 2559
DOI: 10.1016/j.jeurceramsoc.2013.03.027

Tailoring the surface pore morphology of bioceramic scaffolds through colloidal processing for bone tissue engineering

Shareen S. L. Chan, Daniel E. Heath, George V. Franks and Carlos Alberto Antunes Viegas

PLoS ONE, 2025, 20, e0318100
DOI: 10.1371/journal.pone.0318100

Closed porosity ceramics and glasses

Cekdar Vakifahmetoglu, Tugce Semerci and Gian Domenico Soraru

J Am Ceram Soc, 2020, 103, 2941
DOI: 10.1111/jace.16934

Investigating the mechanical behavior of multiscale porous ultra-high temperature ceramics using a quasi-static material point method

Stefan J. Povolny, Gary D. Seidel and Carolina Tallon

Mechanics of Materials, 2021, 160, 103976
DOI: 10.1016/j.mechmat.2021.103976

Combining mechanical foaming and thermally induced phase separation to generate chitosan scaffolds for soft tissue engineering

D. P. Biswas, P. A. Tran, C. Tallon and A. J. O’Connor

Journal of Biomaterials Science, Polymer Edition, 2017, 28, 207
DOI: 10.1080/09205063.2016.1262164

Early Dynamics and Stabilization Mechanisms of Oil-in-Water Emulsions Containing Colloidal Particles Modified with Short Amphiphiles: A Numerical Study

Manuella Cerbelaud, Arnaud Videcoq, Lauriane Alison, Elena Tervoort and André R. Studart

Langmuir, 2017, 33, 14347
DOI: 10.1021/acs.langmuir.7b03472

Development and mechanical characterization of novel ceramic foams fabricated by gel-casting

J.-M. Tulliani, M. Lombardi, P. Palmero, M. Fornabaio and L.J. Gibson

Journal of the European Ceramic Society, 2013, 33, 1567
DOI: 10.1016/j.jeurceramsoc.2013.01.038

Synthesis and Characterization of Eco-friendly Amino Polylactide Foam (APLAF) Active to Remove Palladium and Copper Ions in Water and Wastewater

Iman Mohammadi Dehcheshmeh, Marco Frediani, Ahmad Poursattar Marjani and Peyman Najafi Moghadam

J Polym Environ, 2023, 31, 4842
DOI: 10.1007/s10924-023-02907-w

Carbon based porous materials from particle stabilized wet foams

D. Zabiegaj, E. Santini, M. Ferrari, L. Liggieri and F. Ravera

Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2015, 473, 24
DOI: 10.1016/j.colsurfa.2015.02.031

Ultralight Silicon Nitride Ceramic Foams from Foams Stabilized by Partially Hydrophobic Particles

Xiao‐Yan Zhang, Wen‐Long Huo, Fei Qi, Ya‐Nan Qu, Jie Xu, Ke Gan, Ning Ma, Jin‐Long Yang and P. Colombo

J. Am. Ceram. Soc., 2016, 99, 2920
DOI: 10.1111/jace.14320

Why foams containing colloidal hydrophilic particles are unstable?

D.O. Vivaldini, A.P. Luz, V.R. Salvini and V.C. Pandolfelli

Ceramics International, 2013, 39, 6005
DOI: 10.1016/j.ceramint.2013.01.007

Ultralight alumina ceramic foams with single-grain wall using sodium dodecyl sulfate as long-chain surfactant

Wen-Long Huo, Fei Qi, Xiao-Yan Zhang, Ning Ma, Ke Gan, Ya-Nan Qu, Jie Xu and Jin-Long Yang

Journal of the European Ceramic Society, 2016, 36, 4163
DOI: 10.1016/j.jeurceramsoc.2016.06.030

The effects of pore structures on the air permeation properties of sintered diatomite

Jang-Hoon Ha, Eunji Oh, Rizwan Ahmad and In-Hyuck Song

Ceramics International, 2013, 39, 3881
DOI: 10.1016/j.ceramint.2012.10.231

Controlling Pickering Emulsion Destabilisation: A Route to Fabricating New Materials by Phase Inversion

Catherine Whitby and Erica Wanless

Materials, 2016, 9, 626
DOI: 10.3390/ma9080626

Conductive and Cytocompatible Poly(3,4)ethylene-dioxythiophene:poly(styrenesulfonate) Hierarchical Porous Materials: From Liquid to Solid Foams

Quentin Bailleul, Laurie Grall, Leandro Jacomine, Christine Affolter-Zbaraszczuk, Eric Mathieu, Sergey Pronkin, Antoine Egélé, Pierre Schaaf, Florent Meyer, Wiebke Drenckhan and Fouzia Boulmedais

ACS Appl. Polym. Mater., 2024, 6, 9892
DOI: 10.1021/acsapm.4c01755

A Novel Approach to Fabricate Foam Ceramics from Steel Slag

Yu Zheng, Xudong Luo, Jinlong Yang, Wenlong Huo, Chi Kang and Francesco Ruffino

Advances in Materials Science and Engineering, 2020, 2020
DOI: 10.1155/2020/4649082

Green Synthesis of Lactirofoam Using the Micronization Process

Iman Mohammadi Dehcheshmeh, Marco Frediani, Ahmad Poursattar Marjani and Peyman Najafi Moghadam

Fibers Polym, 2024, 25, 3245
DOI: 10.1007/s12221-024-00656-8

The high porosity silicon nitride foams prepared by the direct foaming method

Zhongpei Du, Dongxu Yao, Yongfeng Xia, Kaihui Zuo, Jinwei Yin, Hanqin Liang and Yu-Ping Zeng

Ceramics International, 2019, 45, 2124
DOI: 10.1016/j.ceramint.2018.10.118

High-strength, 3D interconnected alumina ceramic foams with high porosity comparable to aerogels

Youfei Zhang, Xiaoyan Zhang, Yongjiao Li, Zun Xia, Hongbo Yu, Jinlong Yang and Xiuhui Wang

Ceramics International, 2023, 49, 39070
DOI: 10.1016/j.ceramint.2023.09.244

Foaming of Recyclable Clays into Energy-Efficient Low-Cost Thermal Insulators

Clara Minas, Julia Carpenter, Jonas Freitag, Gnanli Landrou, Elena Tervoort, Guillaume Habert and André R. Studart

ACS Sustainable Chem. Eng., 2019, 7, 15597
DOI: 10.1021/acssuschemeng.9b03617

Fabrication of high-strength porous hydroxyapatite scaffolds via adjusting spherical pores derived from self-assembled particles at the interface of foams

Jingjing Guo, Yin'e Liu, Siran Yin, Bo Liu, Junjie Zhang and Xiaoyan Zhang

Ceramics International, 2026, 52, 7148
DOI: 10.1016/j.ceramint.2025.12.460

Effect of Process Conditions on the Microstructure of Particle-Stabilized Al2O3Foam

Rizwan Ahmad, Jang-Hoon Ha, Yoo-Dong Hahn and In-Hyuck Song

j. Korean Powder Metall. Inst., 2012, 19, 278
DOI: 10.4150/KPMI.2012.19.4.278

Hierarchically porous bone scaffold fabricated via direct foam writing with TCP/ZrO2 composite ink

Weiwei Guo, Junyuan Sun, Zhaoliang Jiang, Xinyu Liu, Jing Xu, Jing Wang and Honghao Zhong

Journal of Alloys and Compounds, 2024, 1003, 175513
DOI: 10.1016/j.jallcom.2024.175513

Highly Porous Zirconia Ceramic Foams with Low Thermal Conductivity from Particle‐Stabilized Foams

Wen‐Long Huo, Xiao‐Yan Zhang, Yu‐Gu Chen, Yu‐Ju Lu, Wen‐Ting Liu, Xiao‐Qing Xi, Ya‐Li Wang, Jie Xu, Jin‐Long Yang and L. Gauckler

J. Am. Ceram. Soc., 2016, 99, 3512
DOI: 10.1111/jace.14555

3D printing of multi-scale porous β-tricalcium phosphate scaffolds: Mechanical properties and degradation

Shareen S.L. Chan, Daniel E. Heath and George V. Franks

Open Ceramics, 2024, 19, 100630
DOI: 10.1016/j.oceram.2024.100630

Hierarchically porous 3D-printed ceramic scaffolds for bone tissue engineering

Shareen S.L. Chan, Jay R. Black, George V. Franks and Daniel E. Heath

Biomaterials Advances, 2025, 169, 214149
DOI: 10.1016/j.bioadv.2024.214149

Environmentally Friendly Engineering and Three-Dimensional Printing of TiO2 Hierarchical Mesoporous Cellular Architectures

Maria A. Torres Arango, Daryl Kwakye-Ackah, Sushant Agarwal, Rakesh K. Gupta and Konstantinos A. Sierros

ACS Sustainable Chem. Eng., 2017, 5, 10421
DOI: 10.1021/acssuschemeng.7b02450

A green fabrication strategy for porous Yb3Al5O12 ceramics with high strength and tunable gas permeability

Xiaofei Wang, Huimin Xiang, Guigen Wang and Yanchun Zhou

J. Mater. Res., 2016, 31, 3078
DOI: 10.1557/jmr.2016.319

Ultrahigh‐strength alumina ceramic foams via gelation of foamed boehmite sol

Yugu Chen, Wenlong Huo, Xiaoyan Zhang, Yuju Lu, Shu Yan, Jingjing Liu, Ke Gan and Jinlong Yang

J Am Ceram Soc, 2019, 102, 5503
DOI: 10.1111/jace.16378

Nanoparticle laden interfacial layers and application to foams and solid foams

Dominika Zabiegaj, Eva Santini, Eduardo Guzmán, Michele Ferrari, Libero Liggieri, Vincenzo Buscaglia, Maria Teresa Buscaglia, Giorgio Battilana and Francesca Ravera

Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2013, 438, 132
DOI: 10.1016/j.colsurfa.2013.02.046

From Pickering foams to porous carbonate materials: crack-free structuring in drying ceramics

M. Hristova, I. Lesov, S. Tcholakova, V. Goletto and N. Denkov

Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2018, 552, 142
DOI: 10.1016/j.colsurfa.2018.05.025

Effect of zeta potential on properties of foamed colloidal suspension

Wenlong Huo, Xiaoyan Zhang, Ke Gan, Yugu Chen, Jie Xu and Jinlong Yang

Journal of the European Ceramic Society, 2019, 39, 574
DOI: 10.1016/j.jeurceramsoc.2018.08.035

A review on recent development of foam Ceramics prepared by particle-stabilized foaming technique

Chao Wang, Jinyang Wang, Qiang Li, Shandong Xu and Jinlong Yang

Advances in Colloid and Interface Science, 2024, 330, 103198
DOI: 10.1016/j.cis.2024.103198

Particle-stabilized Foams for Advanced Ceramic Component Production

George V Franks, Chayuda Chuanuwatanakul and Carolina Tallon

Chemistry Letters, 2012, 41, 1360
DOI: 10.1246/cl.2012.1360

Tailoring microstructure and properties of porous mullite-based ceramics via sol-gel impregnation

E. Bartonickova, J. Svec, L. Dlabajova, P. Hruby, V. Caba, M. Sedlacik, L. Kalina, J. Koplik, F. Soukal, L. Kersnerova, J. Zach, V. Novak and K. Dvorak

Ceramics International, 2025, 51, 5505
DOI: 10.1016/j.ceramint.2024.06.019

A particle-stabilized diatomite foam with a bimodal pore structure

Jang-Hoon HA, Eunji OH, Rizwan AHMAD and In-Hyuck SONG

J. Ceram. Soc. Japan, 2013, 121, 426
DOI: 10.2109/jcersj2.121.426

Elastic plastic fracture mechanics investigation of toughness of wet colloidal particulate materials: Influence of saturation

George V. Franks, Mitchell L. Sesso, Matthew Lam, Yi Lu and Liqing Xu

Journal of Colloid and Interface Science, 2021, 581, 627
DOI: 10.1016/j.jcis.2020.07.142

Microstructure and Elastic Properties of Colloidal Gel Foams

Joseph T. Muth and Jennifer A. Lewis

Langmuir, 2017, 33, 6869
DOI: 10.1021/acs.langmuir.7b01476

Low sintering shrinkage porous ceramics: Principles, progress, and perspectives

Jie Xu, Yueqi Shao, Xiaoying Feng, Xiaoyan Zhang, Hao Li, Jinlong Yang and Feng Gao

Journal of Advanced Ceramics, 2025, 14, 9221015
DOI: 10.26599/JAC.2024.9221015

Role of Pickering stabilization and bulk gelation for the preparation and properties of solid silica foams

I. Lesov, S. Tcholakova, M. Kovadjieva, T. Saison, M. Lamblet and N. Denkov

Journal of Colloid and Interface Science, 2017, 504, 48
DOI: 10.1016/j.jcis.2017.05.036

Heteroprotein complex coacervation of ovotransferrin and lysozyme: Structural properties, interface behavior and foam properties

Ting Zhang, Yinuo Jin, Yulu Li, Jiaxiao Zhai, Jie Wei, Yutong Zhang, Zhaohui Yan, Jingbo Liu and Xuanting Liu

Food Hydrocolloids, 2026, 175, 112440
DOI: 10.1016/j.foodhyd.2026.112440

Direct ink writing of hierarchical porous alumina‐stabilized emulsions: Rheology and printability

Shareen S. L. Chan, Mitchell L. Sesso and George V. Franks

J Am Ceram Soc, 2020, 103, 5554
DOI: 10.1111/jace.17305

Freeze casting for near‐net‐shaping of dense zirconium diboride ceramics

Silvia Leo, Laura Jukes, Samuel Pinches, Carolina Tallon and George V. Franks

J Am Ceram Soc, 2018, 101, 2770
DOI: 10.1111/jace.15451

Ceramic particle-stabilized foams/emulsions with UV light response and further synthesis of ceramic capsules

Wenlong Huo, Xiaoyan Zhang, Ke Gan, Hezhen Li, Shu Yan, Yugu Chen and Jinlong Yang

Chemical Engineering Journal, 2019, 360, 1459
DOI: 10.1016/j.cej.2018.10.172

Factors controlling the formation and stability of foams used as precursors of porous materials

I. Lesov, S. Tcholakova and N. Denkov

Journal of Colloid and Interface Science, 2014, 426, 9
DOI: 10.1016/j.jcis.2014.03.067

Interfacial arrangement of tunable gliadin nanoparticles via electrostatic assembly with pectin: Enhancement of foaming property

Dengfeng Peng, Wei Shang, Jing Yang, Kangyu Li, Wangyang Shen, Chuyun Wan, Fang Geng, Qianchun Deng and Weiping Jin

Food Hydrocolloids, 2023, 143, 108852
DOI: 10.1016/j.foodhyd.2023.108852

Effects of surfactant and particle size on the microstructure and strength of Si3N4 foams with high porosity

Zhongpei Du, Dongxu Yao, Yongfeng Xia, Kaihui Zuo, Jinwei Yin, Hanqin Liang and Yu‐Ping Zeng

Int J Applied Ceramic Tech, 2021, 18, 830
DOI: 10.1111/ijac.13689

Enhancement of the compressive strength of highly porous Al2O3 foam through crack healing and improvement of the surface condition by dip-coating

Rizwan Ahmad, Jang-Hoon Ha and In-Hyuck Song

Ceramics International, 2014, 40, 3679
DOI: 10.1016/j.ceramint.2013.09.057

Macrostructure-controlled titania ceramics derived from particle-stabilized emulsions: Preparation and photocatalysis performance

Yali Li, Jinhong Li, Xiang Wang, Yu Ma, Weimin Guan and Tingting Qian

Materials Chemistry and Physics, 2016, 182, 402
DOI: 10.1016/j.matchemphys.2016.07.048

Activated carbon monoliths from particle stabilized foams

D. Zabiegaj, M.T. Buscaglia, D. Giuranno, L. Liggieri and F. Ravera

Microporous and Mesoporous Materials, 2017, 239, 45
DOI: 10.1016/j.micromeso.2016.09.046

Physicomechanical Properties of Porous Materials by Spark Plasma Sintering

Abolfazl Azarniya, Amir Azarniya, Mir Saman Safavi, Mohammad Farshbaf Ahmadipour, Melica Esmaeeli Seraji, Saeed Sovizi, Mahboobe Saqaei, Ridvan Yamanoglu, Mohammad Soltaninejad, Hamid Reza Madaah Hosseini, Seeram Ramakrishna, Akira Kawasaki, Stefan Adams and M. V. Reddy

Critical Reviews in Solid State and Materials Sciences, 2020, 45, 22
DOI: 10.1080/10408436.2018.1532393

Tailoring the microstructure of high porosity Si3N4 foams by direct foaming with mixed surfactants

Zhongpei Du, Dongxu Yao, Yongfeng Xia, Kaihui Zuo, Jinwei Yin, Hanqing Liang and Yu‐Ping Zeng

J Am Ceram Soc, 2019, 102, 6827
DOI: 10.1111/jace.16599

From an oil with “antifoaming” properties to stabilization for foam: A novel approach for establishing a long-term stable foam system

Fuchao Zhan, Xiaorui Zhou, Ying Jiang, Jing Li and Bin Li

Food Hydrocolloids, 2023, 145, 109086
DOI: 10.1016/j.foodhyd.2023.109086

Processing Methods for the Preparation of Porous Ceramics

Rizwan Ahmad, Jang-Hoon Ha and In-Hyuck Song

j. Korean Powder Metall. Inst., 2014, 21, 389
DOI: 10.4150/KPMI.2014.21.5.389

Rapid synthesis and additive manufacturing of Y3Si2C2 ceramics: Ultrafast high-temperature sintering combined with direct ink writing

Yuhang Bai, Jinrui Li, Jia Liu, Peipei Wang, Xing Zhao and Laifei Cheng

Journal of the European Ceramic Society, 2025, 45, 117610
DOI: 10.1016/j.jeurceramsoc.2025.117610

Ultra-high porosity of open-cell alumina ceramic foams prepared by adding tiny amounts of γ-AlO(OH) sol

Youfei Zhang, Yongjiao Li, Zun Xia, Shihui Zhao, Xiuhui Wang, Hongbo Yu and Jinlong Yang

PAC, 2024, 18, 244
DOI: 10.2298/PAC2403244Z

Direct ink writing of functionally graded bone scaffolds using ceramic foams to mimic natural bone hierarchical porosity and multiple gradients

Weiwei Guo, Anquan Ma, Zhaoliang Jiang, Lichao Gong, Huawen Dai and Shiyuan Han

Composites Part B: Engineering, 2025, 300, 112465
DOI: 10.1016/j.compositesb.2025.112465

A novel method of coating a particle-stabilized alumina foam on a porous alumina substrate

Jang-Hoon Ha, Rizwan Ahmad and In-Hyuck Song

Materials Letters, 2012, 88, 40
DOI: 10.1016/j.matlet.2012.08.007

In situ α-alumina hydrophobization dynamics at acid pH: effectiveness limitations of short-chain amphiphilic molecules

D. O. Vivaldini, A. P. Luz, V. R. Salvini and V. C. Pandolfelli

Mat. Res., 2013, 17, 284
DOI: 10.1590/S1516-14392013005000152

Mechanical strength and damage tolerance of highly porous alumina ceramics produced from sintered particle stabilized foams

Carolina Tallon, Chayuda Chuanuwatanakul, David E. Dunstan and George V. Franks

Ceramics International, 2016, 42, 8478
DOI: 10.1016/j.ceramint.2016.02.069

Ethyl cellulose nanoparticles as stabilizers for Pickering emulsions

Heleen V.M. Kibbelaar, Riande I. Dekker, Azeza Morcy, Willem K. Kegel, Krassimir P. Velikov and Daniel Bonn

Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2022, 641, 128512
DOI: 10.1016/j.colsurfa.2022.128512

Zn-doped titania nanoparticles as building blocks for solid foam filters of water and air via photocatalytic oxidation

M. Vaccari, M. Cremona, D. Orsi, V. Lorusso, A. Baraldi, A. Bosio, D. Pontiroli, L. Liggieri, F. Ravera, E. Santini and L. Cristofolini

Catalysis Communications, 2022, 171, 106527
DOI: 10.1016/j.catcom.2022.106527

Ultrastrong Hierarchical Porous Materials via Colloidal Assembly and Oxidation of Metal Particles

Wenlong Huo, Xiaoyan Zhang, Elena Tervoort, Silvan Gantenbein, Jinlong Yang and André R. Studart

Adv Funct Materials, 2020, 30
DOI: 10.1002/adfm.202003550

Evaluation of temperature-dependent microstructural and nanomechanical properties of phase pure V2O5

Dipta Mukherjee, Dyuman Das, Arjun Dey, Awadesh Kumar Mallik, Jiten Ghosh, Anand Kumar Sharma and Anoop Kumar Mukhopadhyay

J Sol-Gel Sci Technol, 2018, 87, 347
DOI: 10.1007/s10971-018-4745-4

Synergistic influence of charge and wettability on Pickering foam stability

Kaniska Murmu, Manas Mukherjee and Madivala G. Basavaraj

Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2026, 729, 138833
DOI: 10.1016/j.colsurfa.2025.138833