Ceramic nanowrinkles via a facile replication process

Sungjune Park and Alexander Böker

J. Mater. Chem., 2011, 21, 11734
DOI: 10.1039/c1jm12007g

Greener solvents for the processing of preceramic polycarbosilane: application in the preparation of B4C/SiC composites

Marion Weissenberger, Adrien Vincent, Yves Champavier, Cristina Coelho Diogo, Florence Babonneau, Nicolas Pradeilles, Alexandre Maître and Romain Lucas-Roper

RSC Adv., 2024, 14, 21945
DOI: 10.1039/D4RA04431B

Grignard coupling-based synthesis of vinyl-substituted hydridopolycarbosilane: effect of starting material and polymerization behavior

Minji Jeong, Moon-Gun Choi and Yoonjoo Lee

RSC Adv., 2021, 11, 11771
DOI: 10.1039/D1RA00244A

Ordered mesoporous non-oxide materials

Yifeng Shi, Ying Wan and Dongyuan Zhao

Chem. Soc. Rev., 2011, 40, 3854
DOI: 10.1039/c0cs00186d

Additive Manufacturing of 3D Luminescent ZrO2:Eu3+ Architectures

Jędrzej Winczewski, Manuel Herrera, Clément Cabriel, Ignacio Izeddin, Stefan Gabel, Benoit Merle, Arturo Susarrey Arce and Han Gardeniers

Advanced Optical Materials, 2022, 10
DOI: 10.1002/adom.202102758

Stereolithographically 3D Printed SiC Metastructure for Ultrabroadband and High Temperature Microwave Absorption

Niping Zhou, Lu Zhang, Wenqing Wang, Xueqin Zhang, Keqiang Zhang, Mingji Chen, Yixing Huang, Rujie He and Daining Fang

Adv Materials Technologies, 2023, 8
DOI: 10.1002/admt.202201222

Pulsed UV Laser Processing of Carbosilane and Silazane Polymers

Samuel Clark Ligon, Gurdial Blugan and Jakob Kuebler

Materials, 2019, 12, 372
DOI: 10.3390/ma12030372

High‐Performance Polymer‐derived Ceramics in LCD 3D Printing

H. Yazdani Sarvestani, V. Karamzadeh, A. Kulkarni, A. Sohrabi‐Kashani, T. Lacelle, M.B. Jakubinek and B. Ashrafi

Advanced Science, 2025, 12
DOI: 10.1002/advs.202416176

Polymer‐Derived High‐Temperature Nonoxide Materials: A Review

Yue Zhou and Kathy Lu

Adv Eng Mater, 2023, 25
DOI: 10.1002/adem.202200967

Additive Manufacturing of Advanced Ceramics Using Preceramic Polymers

Jinchen Han, Chang Liu, Robyn L. Bradford-Vialva, Donald A. Klosterman and Li Cao

Materials, 2023, 16, 4636
DOI: 10.3390/ma16134636

Multiscale ceramic components from preceramic polymers by hybridization of vat polymerization-based technologies

Johanna Schmidt, Laura Brigo, Alessandro Gandin, Martin Schwentenwein, Paolo Colombo and Giovanna Brusatin

Additive Manufacturing, 2019, 30, 100913
DOI: 10.1016/j.addma.2019.100913

Fabrication Methods for Microscale 3D Structures on Silicon Carbide

Younghak Cho, Jihong Hwang, Min-Soo Park and Bo Hyun Kim

Int. J. Precis. Eng. Manuf., 2022, 23, 1477
DOI: 10.1007/s12541-022-00717-z

Rational design of SiBCN microstructures using direct photolithography of patternable preceramic photoresists

Quentin Hanniet, Eddy Petit, Sylvie Calas-Etienne, Pascal Etienne, Karim Aissou, Christel Gervais, Philippe Miele, Benoit Charlot and Chrystelle Salameh

Materials & Design, 2022, 223, 111234
DOI: 10.1016/j.matdes.2022.111234

Additive micro-manufacturing of crack-free PDCs by two-photon polymerization of a single, low-shrinkage preceramic resin

Georgia Konstantinou, Eirini Kakkava, Lorenz Hagelüken, Pradeep Vallachira Warriam Sasikumar, Jieping Wang, Malgorzata Grazyna Makowska, Gurdial Blugan, Nikolaos Nianias, Federica Marone, Helena Van Swygenhoven, Jürgen Brugger, Demetri Psaltis and Christophe Moser

Additive Manufacturing, 2020, 35, 101343
DOI: 10.1016/j.addma.2020.101343

Selective laser reaction synthesis of SiC, Si3N4 and HfC/SiC composites for additive manufacturing

Adam B. Peters, Dajie Zhang, Alberto Hernandez, Chuhong Wang, Dennis C. Nagle, Tim Mueller and James B. Spicer

Journal of the European Ceramic Society, 2023, 43, 1270
DOI: 10.1016/j.jeurceramsoc.2022.11.015

Additive Manufacturing of Ceramics from Liquid Feedstocks

Giorgia Franchin, Hamada Elsayed, Renata Botti, Kai Huang, Johanna Schmidt, Giulio Giometti, Alice Zanini, Anna De Marzi, Marco D'Agostini, Paolo Scanferla, Yurun Feng and Paolo Colombo

Chinese Journal of Mechanical Engineering: Additive Manufacturing Frontiers, 2022, 1, 100012
DOI: 10.1016/j.cjmeam.2022.100012

Vat Photopolymerization Additive Manufacturing for Advanced Ceramics: Techniques, Multimaterial Strategies, and Applications

Shulei Xu, Chuanzhen Huang, Hanlian Liu and Jun Huang

Adv Eng Mater, 2026, 28
DOI: 10.1002/adem.202501811

Molecule editable 3D printed polymer-derived ceramics

Shixiang Zhou, Hui Mei, Peng Chang, Mingyang Lu and Laifei Cheng

Coordination Chemistry Reviews, 2020, 422, 213486
DOI: 10.1016/j.ccr.2020.213486

Non‐polymeric thin wires by drawing materials near room temperature

Yuwen Wei, Sangmin Lee, Minjae Choe, Priyanuj Bhuyan, Eunseon Kim, Hongchan Jeon, Gun Kang, Changwoon Nah and Sungjune Park

Nano Select, 2021, 2, 608
DOI: 10.1002/nano.202000179

Inorganic Polymer Micropillar‐Based Solution Shearing of Large‐Area Organic Semiconductor Thin Films with Pillar‐Size‐Dependent Crystal Size

Jin‐Oh Kim, Jeong‐Chan Lee, Min‐Ji Kim, Hyunwoo Noh, Hye‐In Yeom, Jong Beom Ko, Tae Hoon Lee, Sang‐Hee Ko Park, Dong‐Pyo Kim and Steve Park

Advanced Materials, 2018, 30
DOI: 10.1002/adma.201800647

Additive manufacturing of polymer-derived ceramics: Materials, technologies, properties and potential applications

Raghvendra Pratap Chaudhary, Chithra Parameswaran, Muhammad Idrees, Abolaji Sefiu Rasaki, Changyong Liu, Zhangwei Chen and Paolo Colombo

Progress in Materials Science, 2022, 128, 100969
DOI: 10.1016/j.pmatsci.2022.100969

Oxidation of 3D‐printed SiC in air and steam environments

Kenneth Kane, Pádraigín Stack, Danny Schappel, Katherine Montoya, Peter Mouche, Elizabeth Sooby and Kurt Terrani

J. Am. Ceram. Soc., 2021, 104, 2225
DOI: 10.1111/jace.17632

Additive manufacturing of transparent conductive indium tin oxide by sol-gel and multiphoton absorption polymerization

Tamar Rosental, Andrea Ottomaniello, Sapir Mizrahi, Naor Menda, May Yam Moshkovitz Douvdevany, Liraz Larush, Daria Savraeva, Natanel Jarach, Virgilio Mattoli and Shlomo Magdassi

Additive Manufacturing, 2024, 92, 104388
DOI: 10.1016/j.addma.2024.104388

Additive manufacturing of silicon carbide for nuclear applications

Takaaki Koyanagi, Kurt Terrani, Shay Harrison, Jian Liu and Yutai Katoh

Journal of Nuclear Materials, 2021, 543, 152577
DOI: 10.1016/j.jnucmat.2020.152577

3D Nanofabrication of SiOC Ceramic Structures

Laura Brigo, Johanna Eva Maria Schmidt, Alessandro Gandin, Niccolò Michieli, Paolo Colombo and Giovanna Brusatin

Advanced Science, 2018, 5
DOI: 10.1002/advs.201800937

Additive manufacturing of polymer derived ceramics: Materials, methods, and applications

Thomas Lacelle, Kathleen L. Sampson, Hamidreza Yazdani Sarvestani, Amir Rahimizadeh, Julieta Barroeta Robles, Mohammad Mirkhalaf, Mohammad Rafiee, Michael B. Jakubinek, Chantal Paquet and Behnam Ashrafi

APL Materials, 2023, 11
DOI: 10.1063/5.0151661

Additive manufacturing of ceramics from preceramic polymers: A versatile stereolithographic approach assisted by thiol-ene click chemistry

Xifan Wang, Franziska Schmidt, Dorian Hanaor, Paul H. Kamm, Shuang Li and Aleksander Gurlo

Additive Manufacturing, 2019, 27, 80
DOI: 10.1016/j.addma.2019.02.012

WITHDRAWN: Sintering Method of Silicon carbide ceramics using Stereolithography additive Manufacturing (SLAM) Process

Mohd Zaheen Khan, Asif Afzal, R.K.Abdul Razak, Sagr Alamri and C Ahamed Saleel

Journal of Materials Research and Technology, 2021
DOI: 10.1016/j.jmrt.2021.08.074

Application of Bis[2-(3,4-epoxycyclohexyl)ethyl] octamethyltetrasiloxane in the Preparation of a Photosensitive Resin for Stereolithography 3D Printing

Biwu Huang, Linlin Han, Baolin Wu, Hao Chen, Wenbin Zhou and Zhenting Lu

J. Wuhan Univ. Technol.-Mat. Sci. Edit., 2019, 34, 1470
DOI: 10.1007/s11595-019-2215-7

Irradiation stability and thermomechanical properties of 3D-printed SiC

K.A. Terrani, T. Lach, H. Wang, A. Le Coq, K. Linton, C. Petrie, T. Koyanagi and T.S. Byun

Journal of Nuclear Materials, 2021, 551, 152980
DOI: 10.1016/j.jnucmat.2021.152980

Additive manufacturing of structural materials

Guo Liu, Xiaofeng Zhang, Xuliang Chen, Yunhu He, Lizi Cheng, Mengke Huo, Jianan Yin, Fengqian Hao, Siyao Chen, Peiyu Wang, Shenghui Yi, Lei Wan, Zhengyi Mao, Zhou Chen, Xu Wang, Zhaowenbo Cao and Jian Lu

Materials Science and Engineering: R: Reports, 2021, 145, 100596
DOI: 10.1016/j.mser.2020.100596

Synthesis and Optimization of a Free-Radical/Cationic Hybrid Photosensitive UV Curable Resin Using Polyurethane Acrylate and Graphene Oxide

Lijie Huang, Yanan Wang, Zhehao Wei, Xiaoxue Han, Qi Mo, Xiyue Wang and Yishan Li

Polymers, 2022, 14, 1959
DOI: 10.3390/polym14101959

Polymer-derived SiOC replica of material extrusion-based 3-D printed plastics

Apoorv Kulkarni, Gian Domenico Sorarù and Joshua M. Pearce

Additive Manufacturing, 2020, 32, 100988
DOI: 10.1016/j.addma.2019.100988

Enhanced Boiling Heat Transfer Performance on Microstructured Silicate Glass Surfaces Derived from Inorganic Polymer‐Based Soft Lithography

Hyunwoo Noh, Jin‐Oh Kim, Dong‐Hwi Kim, Hyun Sun Park, Yoon‐Ho Hwang, Moo Hwan Kim and Dong‐Pyo Kim

Adv Materials Inter, 2016, 3
DOI: 10.1002/admi.201600507

Three‐dimensional chemical reactors: in situ materials synthesis to advance vat photopolymerization

Daryl W Yee and Julia R Greer

Polymer International, 2021, 70, 964
DOI: 10.1002/pi.6165

Submicron Metal 3D Printing by Ultrafast Laser Heating and Induced Ligand Transformation of Nanocrystals

Chinmoy Podder, Xiangtao Gong, Xiaowei Yu, Wan Shou and Heng Pan

ACS Appl. Mater. Interfaces, 2021, 13, 42154
DOI: 10.1021/acsami.1c10775

Stereolithography additive manufacturing and sintering approaches of SiC ceramics

Xuejian Bai, Guojiao Ding, Keqiang Zhang, Wenqing Wang, Niping Zhou, Daining Fang and Rujie He

Open Ceramics, 2021, 5, 100046
DOI: 10.1016/j.oceram.2020.100046

Additive manufacturing pathways for polymer-derived ceramics: processing, structure, and function

Saurabh Khuje, Nicholas Ku, Andres Bujanda, Jian Yu, Harvey Tsang, Nicholas Meuse, Lionel Vargas-Gonzalez and Shenqiang Ren

npj Adv. Manuf., 2026, 3
DOI: 10.1038/s44334-026-00068-x

A simple and tailor‐made fabrication of porous silicon carbide from functionalized kraft pulp paper

Mégane Bernard, Romain Lucas, Hatim Laadoua, Zineb Khaldi, Nicolas Pradeilles, Olivier Rapaud, Sylvie Foucaud, Rachida Zerrouki and François Brouillette

Polymers for Advanced Techs, 2020, 31, 319
DOI: 10.1002/pat.4771

Debinding and sintering optimization of stereolithography based silicon nitride parts for attaining centimetric wall-thickness shapes

Théotim Marie, Zehui Du, Chee Lip Gan, Sylvain Marinel, Vijay Shankar Sridharan and Charles Manière

Journal of the European Ceramic Society, 2025, 45, 116911
DOI: 10.1016/j.jeurceramsoc.2024.116911

A perspective on 3D printing of silicon carbide

Alberto Boretti and Stefania Castelletto

Journal of the European Ceramic Society, 2024, 44, 1351
DOI: 10.1016/j.jeurceramsoc.2023.10.041

A comparative study on 3D printed silicone-epoxy/acrylate hybrid polymers via pure photopolymerization and dual-curing mechanisms

Tingting Zhao, Ran Yu, Xinpan Li, Ying Zhang, Xin Yang, Xiaojuan Zhao and Wei Huang

J Mater Sci, 2019, 54, 5101
DOI: 10.1007/s10853-018-3070-1

Maskless lithography of silazanes for fabrication of ceramic micro-components

S. Clark Ligon, G. Blugan and J. Kuebler

Ceramics International, 2019, 45, 2345
DOI: 10.1016/j.ceramint.2018.10.151

3D printing of ceramics: A review

Zhangwei Chen, Ziyong Li, Junjie Li, Chengbo Liu, Changshi Lao, Yuelong Fu, Changyong Liu, Yang Li, Pei Wang and Yi He

Journal of the European Ceramic Society, 2019, 39, 661
DOI: 10.1016/j.jeurceramsoc.2018.11.013

Curing reactions of liquid hydridopolycarbosilanes with vinyl or allyl groups

Binjie Qian, Biwen Cao, Mingyu Chu, Yubing Li, Hanyu Ma, Rongye Guo and Liqiang Wan

J of Applied Polymer Sci, 2023, 140
DOI: 10.1002/app.54565

Two-step laser processing of micro/nano-composite structures on PS-SiC surfaces for superior friction performance under water-lubrication

Xiaozhu Chen, Yu Huang, Youmin Rong and Congyi Wu

Ceramics International, 2025, 51, 26171
DOI: 10.1016/j.ceramint.2025.03.300

Synthesis of SiFeC Magnetoceramics from Reverse Polycarbosilane‐Based Microemulsions

Yuxi Yu, Linan An, Yaohan Chen and Daxiang Yang

Journal of the American Ceramic Society, 2010, 93, 3324
DOI: 10.1111/j.1551-2916.2010.03869.x

Effect of debinding temperature under an argon atmosphere on the microstructure and properties of 3D-printed alumina ceramics

He Li, Yongsheng Liu, Yansong Liu, Qingfeng Zeng, Kehui Hu, Zhigang Lu and Jingjing Liang

Materials Characterization, 2020, 168, 110548
DOI: 10.1016/j.matchar.2020.110548

Rational Design of Si(B)Cn Microstructures Using Direct Photolithography of Patternable Preceramic Photoresists

Quentin Hanniet, Eddy Petit, Sylvie Calas-Etienne, Pascal Etienne, Karim Aissou, Christel Gervais, philippe Miele, Benoit Charlot and Chrystelle Salameh

SSRN Journal, 2022
DOI: 10.2139/ssrn.4116057

Meniscus-Guided Control of Supersaturation for the Crystallization of High Quality Metal Organic Framework Thin Films

Jeong-Chan Lee, Jin-Oh Kim, Ho-Jun Lee, Byungha Shin and Steve Park

Chem. Mater., 2019, 31, 7377
DOI: 10.1021/acs.chemmater.9b01996