Issue 3, 2024

Thermoelectric nanowires for dense 3D printed architectures

Abstract

The large-scale employment of 3D printed inorganic thermoelectrics is primarily constrained because of their lower efficiencies as compared to those fabricated from conventional methods such as spark plasma sintering and hot-pressing. This originates from the significant challenge in the densification of printed parts, particularly through the direct-ink-writing fabrication process, which demands a high binder content for printability. To achieve high-density printed thermoelectrics, the ink formulation process often involves the addition of substantial filler content and sintering aids, coupled with prolonged sintering periods. Here, we propose a strategy to resolve the low densification issue of 3D printed thermoelectrics through a binder-less and sintering aid-free thermoelectric nanowire ink system that can achieve dense thermoelectric structures (up to 82.5% theoretical density). The increase in density and corresponding enhancement of thermoelectric material efficiency are attained in a more tunable and controlled manner without compromising the material composition. A high filler-derived density index (FDI) of 2.51 is also achieved, implying the potential to obtain high-density parts with minimal filler content, thus unlocking a cascade of profound impacts. Crucially, this advancement enables the possibilities of anisotropic engineering in thermoelectric materials, thereby shattering the limitations that have hindered the widespread adoption of 3D printed inorganic thermoelectrics.

Graphical abstract: Thermoelectric nanowires for dense 3D printed architectures

Associated articles

Supplementary files

Article information

Article type
Communication
Submitted
08 10 2023
Accepted
23 11 2023
First published
23 11 2023

Mater. Horiz., 2024,11, 847-854

Thermoelectric nanowires for dense 3D printed architectures

D. Zhang, J. Ramiah, M. Cagirici, K. Saglik, S. F. D. Solco, J. Cao, J. Xu and A. Suwardi, Mater. Horiz., 2024, 11, 847 DOI: 10.1039/D3MH01646C

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements