Issue 1, 2021

Antimony alloying electrode for high-performance sodium removal: how to use a battery material not stable in aqueous media for saline water remediation

Abstract

Capacitive deionization (CDI) is based on ion electrosorption and has emerged as a promising desalination technology, for example, to obtain drinking water from brackish water. As a next-generation technology, battery desalination uses faradaic processes and, thereby, enables higher desalination capacities and remediation of feed water with high molar strength such as seawater. However, the full use of a large capacity of charge transfer processes is limited by the voltage window of water and the need to use electrode materials non-reactive towards the water. Using our multi-channel bi-electrolyte cell, we now introduce for the first time an alloying electrode for sodium removal in the context of water desalination. Separated by a ceramic sodium superionic conductor (NASICON) membrane, the antimony/carbon composite electrode accomplished sodium removal while chlorine removal is enabled via ion electrosorption with nanoporous carbon (activated carbon cloth). In a sodium-ion battery half-cell setup, the antimony/carbon composite electrode reaches an initial capacity of 714 mA h g−1 at a specific current of 200 mA g−1, which shows a slow but continuous degrading over the course of 80 cycles (426 mA h g−1 in 80th cycle). Our hybrid CDI cell provides a desalination capacity of an average of 294 mgNa gSb−1 (748 mgNaCl gSb−1) with a charge efficiency of ca. 74% in a 600 mM NaCl at a specific current of 200 mA g−1 and a voltage range of −2.0 V to +2.0 V.

Graphical abstract: Antimony alloying electrode for high-performance sodium removal: how to use a battery material not stable in aqueous media for saline water remediation

Supplementary files

Article information

Article type
Paper
Submitted
07 10 2020
Accepted
24 11 2020
First published
25 11 2020

J. Mater. Chem. A, 2021,9, 585-596

Antimony alloying electrode for high-performance sodium removal: how to use a battery material not stable in aqueous media for saline water remediation

S. Arnold, L. Wang, Ö. Budak, M. Aslan, P. Srimuk and V. Presser, J. Mater. Chem. A, 2021, 9, 585 DOI: 10.1039/D0TA09806J

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements