Issue 26, 2024

Synergistic design of g-C3N4-supported CNTs: experimental and DFT insights for enhanced electrochemical performance in flexible Li–S batteries

Abstract

In addressing the shuttle effect and sluggish redox kinetics of lithium polysulfides (LiPSs) in lithium–sulfur batteries, we developed a novel heterostructure combining 1D carbon nanotubes (CNTs) grown on a 2D sheet of graphitic carbon nitride (g-C3N4) to improve conversion reaction kinetics and LiPS adsorption capacity. The high pyridine N content in g-C3N4 facilitates homogeneous Li ion deposition and enhances affinity between Li and N atoms. Extensive experimental characterization and density functional theory (DFT) calculations validated the interaction between g-C3N4-CNT/S and LiPSs. In pouch cell evaluation, the hybrid g-C3N4-CNT/S cathode, with ∼70% sulfur loading, demonstrated outstanding rate performance, delivering ∼895 mA h g−1 at 0.1C and retaining ∼500 mA h g−1 even at 1.5C under lean electrolyte conditions (E/S ∼5 μl mg−1). Long-term stability over 250 cycles, with a capacity retention of 86% and a coulombic efficiency (CE) of 90.4%, was achieved, even with an elevated sulfur loading of 6.2 mg cm−2. Post-mortem investigation using X-ray photoelectron spectroscopy (XPS) and electrochemical impedance spectroscopy (EIS) elucidated surface chemistry changes and elemental composition alterations, highlighting the formation of various reaction products during charge–discharge cycles. This study underscores the cost-effective heterostructure strategy's potential for advancing LiSBs in practical applications.

Graphical abstract: Synergistic design of g-C3N4-supported CNTs: experimental and DFT insights for enhanced electrochemical performance in flexible Li–S batteries

Supplementary files

Article information

Article type
Paper
Submitted
08 2 2024
Accepted
15 5 2024
First published
16 5 2024

J. Mater. Chem. A, 2024,12, 15814-15828

Synergistic design of g-C3N4-supported CNTs: experimental and DFT insights for enhanced electrochemical performance in flexible Li–S batteries

V. K. Tomer, R. L. Kumawat, O. A. Titton Dias, R. Malik, G. C. Schatz and M. Sain, J. Mater. Chem. A, 2024, 12, 15814 DOI: 10.1039/D4TA00918E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements