Issue 4, 2024

Polymer composites with 3D graphene architectures as high-performance EMI shielding materials: a review

Abstract

Secondary electromagnetic pollution generated due to the inevitable reflection in solid/thin film conducting polymer composites has been a major barrier in realizing high-performance absorption-dominated electromagnetic interference (EMI) shielding. In the past, prodigious efforts were made to minimize the reflection by tailoring the impedance characteristics between the air and the substrate. For instance, incorporation of a microcellular scaffold (3D structure) such as foam and aerogel in a polymer matrix have been extensively investigated to tailor the surface impedance matching and achieve enhanced absorption. To date, application of the 3D graphene microcellular scaffold alone or its hybrid with other magnetic, conductive, and dielectric materials has been continuously pursued to diminish reflectivity and increase absorption via the dielectric and interfacial relaxation loss mechanism. An aerogel and foam structure contains multiscale pores (micro and nano scale pores). Through the large number of solid/air interfaces created by such pores, it can efficiently tune the impedance matching. The solid/air interface renders surplus EM wave attenuation capabilities by increasing the EM wave trajectory path via internal scattering within the pores. The 3D graphene architectures-based polymer composites show hitherto EMI shielding efficiency improvement at significantly low mass density and percolation threshold. However, most of the existing studies on 3D graphene-based composites rely on trial-and-error methods without comprehensively investigating the effect of the geometrical and microstructures aspects on the EMI shielding performance. Furthermore, the state-of-art literature does not (re)present an analytical/theoretical model that can be employed to optimize parameters appropriate for designing the absorption-dominated shielding material with diminished reflection. This review is intended to cover the latest progress and innovation around 3D graphene nanostructure-based polymer composites as EMI shielding materials. The EMI shielding properties of the composites, including graphene aerogels, foam and hybrid aerogel/foam, with other dielectric and magnetic materials are discussed along with the underlying mechanism. In addition, this review represents an input impedance model that can be utilized in conjunction with experimental design to optimize geometrical and microstructural parameters to realize an absorption-dominated shielding material. Based on the available status on 3D graphene scaffold-based composites, we summarize the current achievements and offer a route toward future developments.

Graphical abstract: Polymer composites with 3D graphene architectures as high-performance EMI shielding materials: a review

Transparent peer review

To support increased transparency, we offer authors the option to publish the peer review history alongside their article.

View this article’s peer review history

Article information

Article type
Review Article
Submitted
20 2 2024
Accepted
16 4 2024
First published
23 4 2024
This article is Open Access
Creative Commons BY-NC license

RSC Appl. Polym., 2024,2, 507-533

Polymer composites with 3D graphene architectures as high-performance EMI shielding materials: a review

S. Chhetri and T. Kuila, RSC Appl. Polym., 2024, 2, 507 DOI: 10.1039/D4LP00061G

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements