Issue 21, 2023

Fabrication of highly efficient encapsulated SnO2@alginate beads as regenerative nanosorbents for anionic dye pollutants removal from aqueous solution

Abstract

Nano-adsorbents are emerging as potential candidates for the treatment of toxic organic pollutants. In this context, spherical SnO2 nanoparticles (NPs) are synthesized through a facile hydrothermal method without the usage of toxic chemical precursors, which is confirmed through PXRD, TEM, FTIR, and Raman spectroscopy. SEM imaging was used to confirm the spherical morphology of the NPs. These NPs when applied as nano-adsorbents demonstrate the ability to remove anionic dyes from aqueous solution. In particular, 0.1 g/100 mL SnO2 NPs exhibit 95.96% Congo red (CR) removal efficiency from its aqueous solution within an exposure time of 1 min. Primary driving forces of adsorption can be attributed to electrostatic attraction and hydrogen bonding. Raman spectra confirmed the presence of oxygen vacancies which can be a major factor for their high adsorption efficiency. The adsorption process for CR dye fitted felicitously with pseudo-second order kinetics indicating chemisorption and the Langmuir model indicating CR monolayer formation on the nano-adsorbent. The maximum adsorption capacity is estimated to be 961.5 mg g−1. Finally, the possibility of metal leaching has been addressed through encapsulation of SnO2 NPs within sodium alginate crosslinked by CaCl2, which also exhibited nearly 75% adsorption efficiency after an exposure time of 5 min, with successful regeneration. In addition to adsorption capability toward CR dye, SnO2@SA also exhibited moderate adsorption efficiencies towards eosin yellow, orange G, and methyl orange dyes. This study demonstrates SnO2 NPs as a potential nano-adsorbent for treatment of toxic effluents through a sustainable, facile and economical method.

Graphical abstract: Fabrication of highly efficient encapsulated SnO2@alginate beads as regenerative nanosorbents for anionic dye pollutants removal from aqueous solution

Supplementary files

Article information

Article type
Paper
Submitted
29 8 2023
Accepted
12 9 2023
First published
13 9 2023
This article is Open Access
Creative Commons BY-NC license

Mater. Adv., 2023,4, 5160-5174

Fabrication of highly efficient encapsulated SnO2@alginate beads as regenerative nanosorbents for anionic dye pollutants removal from aqueous solution

S. J. Borah, A. Gupta, K. K. Dubey and V. Kumar, Mater. Adv., 2023, 4, 5160 DOI: 10.1039/D3MA00615H

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements