Issue 3, 2023

Graphene oxide modulated dual S-scheme ultrathin heterojunctions with iron phthalocyanine and phase-mixed bismuth molybdate as wide visible-light catalysts

Abstract

Herein, a phase-mixed Bi3.2Mo0.8O7.5–Bi2MoO6 (2.7BMO) S-scheme nanosheet heterojunction (∼4 nm) is successfully synthesized using a microwave-assisted hydrothermal method firstly and then coupled with two-layered iron phthalocyanine (FePc) (∼1 nm) via a hydroxyl-induced assembly prior to graphene oxide (G) modification for fabricating an interface-modulated dual S-scheme ultrathin heterojunction (FePc/G/2.7BMO), in which the used G with abundant hydroxyl groups greatly improves the dispersion of FePc on 2.7BMO nanosheets to increase the optimized loading amount from 0.5 to 0.8 wt% with more exposed Fe–N4 sites. The amount-optimized heterojunction displays greatly improved visible-light activity for tetracycline (TC) degradation, which is 8.5 and 4.3 times higher than those of bare Bi3.2Mo0.8O7.5 and Bi2MoO6 nanosheets, respectively. The exceptional visible-light activity can be attributed to the enhanced charge separation due to the formed interface-modulated dual S-scheme heterojunction, and the extended wide visible-light response and the promoted O2 activation via the Fe–N4 sites from the assembled FePc.

Graphical abstract: Graphene oxide modulated dual S-scheme ultrathin heterojunctions with iron phthalocyanine and phase-mixed bismuth molybdate as wide visible-light catalysts

Supplementary files

Article information

Article type
Paper
Submitted
26 12 2022
Accepted
06 2 2023
First published
07 2 2023

Environ. Sci.: Nano, 2023,10, 922-932

Graphene oxide modulated dual S-scheme ultrathin heterojunctions with iron phthalocyanine and phase-mixed bismuth molybdate as wide visible-light catalysts

D. Hu, T. Song, A. Zada, R. Yan, Z. Li, Z. Zhang, J. Bian, Y. Qu and L. Jing, Environ. Sci.: Nano, 2023, 10, 922 DOI: 10.1039/D2EN01148D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements