Issue 6, 2021

Reductive processing of single walled carbon nanotubes for high volumetric performance supercapacitors

Abstract

Intrinsically, single walled carbon nanotubes (SWCNTs) are excellent candidates for electrochemical double layer supercapacitor (EDLC) electrodes, owing to their high electrical conductivity, high accessible surface area, and high aspect ratio/connectivity, which provide exceptional intrinsic gravimetric energy and power densities. However, in practice, local bundling due to strong intertube van der Waals interactions reduces the effective surface area; at larger scales, the bundling also creates low density networks that limit the volumetric electrochemical performance of practical electrodes. In this study, reductive charging is used to dissolve individual SWCNTs and assemble them to form relatively dense (0.34 g cm−3), thick (38 μm) ‘buckypaper’ electrodes, with high electrical conductivity (>400 S cm−1). Intermediate charging ratios (C : Na = 10 : 1) and carbon concentrations (0.125 M) provide greater SWCNT solubilisation and individualisation, and correlate with maximum volumetric capacitance of 74 F cmelectrode−3 at 10 mV s−1 in 1 M H2SO4. These optimised half-cell electrodes were implemented in full symmetric cell devices, prepared in both aqueous and ionic liquid electrolytes, using a bespoke bacterial cellulose (BC) ultrathin separator (7 microns) to minimize parasitic mass/volume. The full cell performance in ionic liquid reached maximum energy and power densities of 2.6 Wh kg−1 (2.2 mWh cm−3), and 10.2 kW kg−1 (8.3 W cm−3), respectively, normalised by the total mass and volume of device (electrodes, electrolyte, and separator; no separate current collector is needed). The relatively effective transfer of half-cell to full-cell performance is encouraging but could be optimized further in future. Appropriate normalisations for supercapacitor electrodes and devices are discussed in detail. Thin BC-based separators have wide applicability to other electrochemical devices.

Graphical abstract: Reductive processing of single walled carbon nanotubes for high volumetric performance supercapacitors

Supplementary files

Article information

Article type
Paper
Submitted
17 11 2020
Accepted
02 2 2021
First published
02 2 2021
This article is Open Access
Creative Commons BY-NC license

Mater. Adv., 2021,2, 1981-1992

Reductive processing of single walled carbon nanotubes for high volumetric performance supercapacitors

P. Sirisinudomkit, E. Senokos, N. Rubio and M. S. P. Shaffer, Mater. Adv., 2021, 2, 1981 DOI: 10.1039/D0MA00898B

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements