Issue 3, 2020

High-temperature heterogeneous catalysis in platinum nanoparticle – molten salt suspensions

Abstract

Suspensions of platinum nanoparticles (PtNPs) were formed in molten LiCl–LiBr–KBr via thermal decomposition of H2PtCl6, and subsequently evaluated for thermal stability and CO oxidation activity. Significant nanoparticle (NP) aggregation was observed above 500 °C, and the heat capacity of the melt with PtNPs was 47% higher than the salt alone, further increasing with NP concentration. CO oxidation was observed when PtNPs were present in the melt, which, together with measured changes in surface tension, support the hypothesis that gas–solid catalysis at the gas–nanoparticle-melt interface is indeed possible, opening up a new approach for heterogeneous catalysis.

Graphical abstract: High-temperature heterogeneous catalysis in platinum nanoparticle – molten salt suspensions

Supplementary files

Article information

Article type
Communication
Submitted
16 9 2019
Accepted
16 1 2020
First published
16 1 2020

Catal. Sci. Technol., 2020,10, 625-629

Author version available

High-temperature heterogeneous catalysis in platinum nanoparticle – molten salt suspensions

B. Tangeysh, C. Palmer, H. Metiu, M. J. Gordon and E. W. McFarland, Catal. Sci. Technol., 2020, 10, 625 DOI: 10.1039/C9CY01823A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements