Issue 68, 2017

Extraction and modification of cellulose nanofibers derived from biomass for environmental application

Abstract

Cellulose is a natural biopolymer that is abundantly available in plant cell walls and is secreted in its pure forms by many bacteria. Due to their unique features cellulose materials are considered as efficient replacements for conventional polymers. Cellulose nanofibers (CNF) have attracted wide interest due to their nano size, ease of preparation, low cost, tuneable surface properties and enhanced mechanical properties. However, the efficiency of CNF depends on the extraction method employed from its source and their features vary from source to source. Hence, there is a need to understand the specificity of CNF extraction from its source in order to obtain highly efficient CNF with maximum potential. CNF has been extracted from plant sources using physical, chemical and enzymatic methods. Although plant derived CNF possess excellent features, the involvement of chemicals and complexity in extraction process limits their usage. Bacterial CNF overcome this limitation through its extracellular secretion which makes extraction easy. CNF is also extracted from various marine filamentous algae. The percentage of CNF obtained from algal sources is less compared to plants and bacterial sources. CNF finds wide variety of applications such as drug carriers, tissue regenerating scaffolds, water purifying membranes, electrodes, supercapacitors, fluorescent probes and flexible electronics. In this review, various extraction techniques of CNF from different plant and bacterial sources are discussed critically with special emphasis on CNF based composites.

Graphical abstract: Extraction and modification of cellulose nanofibers derived from biomass for environmental application

Article information

Article type
Review Article
Submitted
16 6 2017
Accepted
28 8 2017
First published
04 9 2017
This article is Open Access
Creative Commons BY-NC license

RSC Adv., 2017,7, 42750-42773

Extraction and modification of cellulose nanofibers derived from biomass for environmental application

M. Prakash Menon, R. Selvakumar, P. Suresh kumar and S. Ramakrishna, RSC Adv., 2017, 7, 42750 DOI: 10.1039/C7RA06713E

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements