Issue 10, 2023

A novel polymer electrolyte with in situ polymerization and a high concentration of lithium salts for lithium metal batteries

Abstract

A novel polymer electrolyte is prepared by in situ polymerization for lithium metal batteries. The polymer electrolyte with in situ polymerization can maintain good inter-facial contact property between the electrodes and electrolyte. It is proved that the interface contact between the Li metal and the polymer electrolyte is very good. And the electrolyte is joined to the cathode electrode by in situ polymerization. As a result, the inter-facial resistance of the electrodes and electrolyte is small. Herein, the polymer electrolyte is amorphous. Thus, the novel polymer electrolyte has a high ionic conductivity (3.4 × 10−3 S cm−1) at room temperature and an electrochemical stability window (5 V, vs. Li/Li+). Furthermore, the polymer electrolyte is stable on the lithium metal anode. The polymer electrolyte also has good mechanical properties and can adapt to the changes of material volume and stress during charge and discharge. Thus, it can maintain the interface stability. As a result, the LiFePO4/polymer electrolyte/Li battery has good cycling stability and rate performance.

Graphical abstract: A novel polymer electrolyte with in situ polymerization and a high concentration of lithium salts for lithium metal batteries

Supplementary files

Article information

Article type
Paper
Submitted
22 9 2022
Accepted
13 2 2023
First published
15 2 2023

Polym. Chem., 2023,14, 1094-1102

A novel polymer electrolyte with in situ polymerization and a high concentration of lithium salts for lithium metal batteries

C. Wang, D. Li, N. Liu, G. Bai, W. He, X. Zhou, J. Wang, J. Zhang and X. Liu, Polym. Chem., 2023, 14, 1094 DOI: 10.1039/D2PY01208A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements