Issue 22, 2023

A closed-loop process for high-value regeneration of spent LiFePO4 cathodes after selective aluminium precipitation

Abstract

Regarding issues such as the removal of Al and resource utilization of phosphorus iron, a recycling process is proposed in this paper in which spent cathode materials and Al foil are leached by low-concentration acids, then Al is selectively precipitated, and finally the lithium iron phosphate material is synthesized by a one-step hydrothermal synthesis method after being prepared in a certain liquid ratio. Each influencing factor in the processes of acid leaching and precipitation of Al was investigated, and the corresponding mechanism and elemental direction were analyzed. The experimental results showed that the ideal leaching effect could be achieved using low concentrations of sulfuric acid, at leaching rates of 99.98%, 99.12%, 99.16%, and 22.44% for lithium, iron, phosphorus, and Al, respectively, under optimal conditions. Al was selectively precipitated in the form of Al phosphate, and the removal rate could reach more than 99.71%. This experimental scheme significantly reduces the necessary amounts of acid and alkali, produces less slag, is carried out using a compact process, and realizes the efficient recycling of lithium iron phosphate resources.

Graphical abstract: A closed-loop process for high-value regeneration of spent LiFePO4 cathodes after selective aluminium precipitation

Article information

Article type
Paper
Submitted
22 8 2023
Accepted
09 10 2023
First published
18 10 2023

Green Chem., 2023,25, 9156-9166

A closed-loop process for high-value regeneration of spent LiFePO4 cathodes after selective aluminium precipitation

K. Yan, Q. Chen, Z. Zhang, H. Nie, R. Wang and Z. Xu, Green Chem., 2023, 25, 9156 DOI: 10.1039/D3GC03144F

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements