Issue 9, 2019

Design strategies for developing non-precious metal based bi-functional catalysts for alkaline electrolyte based zinc–air batteries

Abstract

Compared with the current dominant energy storage system (lithium-ion batteries (LIBs)), rechargeable zinc–air batteries (ZABs) with alkaline electrolyte are safer and less expensive, have much higher theoretical volumetric energy density, can be manufactured in ambient air rather than a dry room, and have much higher tolerance to moisture and air during operation. A mature aqueous alkaline electrolyte could also significantly improve safety while minimizing the fabrication cost. Hence, ZABs have great potential to challenge the dominant position of LIBs in the future. Nevertheless, the widespread application of this energy storage system is seriously hindered by the sluggish kinetics of the oxygen reduction (ORR) and evolution reactions (OER) at the liquid–gas–solid phase cathode interface. Therefore, to further promote the development of this technology, the development of low-cost, high-activity catalysts for the OER/ORR has long been recognized as a crucial measure. This paper summarizes the existing strategies that could be used to develop non-precious-metal based, high activity bifunctional OER/ORR catalysts for the alkaline electrolyte based zinc–air system.

Graphical abstract: Design strategies for developing non-precious metal based bi-functional catalysts for alkaline electrolyte based zinc–air batteries

Article information

Article type
Review Article
Submitted
03 4 2019
Accepted
17 5 2019
First published
20 5 2019

Mater. Horiz., 2019,6, 1812-1827

Design strategies for developing non-precious metal based bi-functional catalysts for alkaline electrolyte based zinc–air batteries

C. Han, W. Li, H. Liu, S. Dou and J. Wang, Mater. Horiz., 2019, 6, 1812 DOI: 10.1039/C9MH00502A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements