Issue 11, 2013

In situ synthesis of the reduced graphene oxide–polyethyleneimine composite and its gas barrier properties

Abstract

The ternary roles of polyethyleneimine (PEI) as a reducing agent, a surface modifier and a polymer host have been presented to fabricate reduced graphene oxide (RGO) based composite films with improved gas barrier property. The PEI functionalized RGO dispersion is prepared and filtered to fabricate thin films with a brick and mortar structure. The simultaneous reduction and functionalization of graphene oxide (GO) by PEI are confirmed by Fourier transform infrared spectroscopy, ultraviolet-visible spectroscopy, X-ray photoelectron spectroscopy, Raman spectroscopy and transmission electron microscopy analysis. The good dispersion of graphene sheets in the PEI matrix and the layered structure is confirmed by X-ray diffraction and field emission scanning electron microscopy analyses. Thermogravimetric analysis also confirms the removal of oxygen functionalities from GO and the attachment of PEI chains to the RGO sheets. The electrical conductivity of the RGO film is found to be 492 S m−1 at low content of PEI (PEI : GO = 0.02 : 1), and increasing the PEI content leads to a decrease in the electrical conductivity of the films. In contrast, the water dispersibility and gas barrier properties increase with increasing PEI content in the composite film.

Graphical abstract: In situ synthesis of the reduced graphene oxide–polyethyleneimine composite and its gas barrier properties

Supplementary files

Article information

Article type
Paper
Submitted
24 11 2012
Accepted
23 1 2013
First published
24 1 2013

J. Mater. Chem. A, 2013,1, 3739-3746

In situ synthesis of the reduced graphene oxide–polyethyleneimine composite and its gas barrier properties

H. Liu, T. Kuila, N. H. Kim, B. Ku and J. H. Lee, J. Mater. Chem. A, 2013, 1, 3739 DOI: 10.1039/C3TA01228J

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements