Issue 4, 2020

Design of a composite cathode and a graphene coated separator for a stable room-temperature aluminum–sulfur battery

Abstract

Both aluminum and sulfur are promising materials for future-generation electrochemical energy storage technology owing to their natural abundance, low cost, and high capacity. However, a rechargeable aluminum–sulfur (Al–S) battery with high energy density suffers from poor reversibility and very short cycle life. Herein, a graphene/CoS2/sulfur composite cathode together with a reduced graphene oxide (rGO) coated separator are fabricated to improve the room-temperature Al–S battery performance. The rGO coating on the separator along with the composite cathode form a sandwich structure which effectively suppresses the diffusion of polysulfides and decreases the polarization of the battery. As a result, the Al–S battery gives a stable cycle life of 38 cycles with a high discharge capacity range of 676–1145 mA h g−1 at 50 mA g−1; the performance is greatly improved compared with the bare separator. Electrochemical, spectroscopic, and microscopic analyses illustrate the mechanism of electrochemical reactions in detail. These meaningful studies facilitate a remarkable step forward in the progress of Al–S batteries.

Graphical abstract: Design of a composite cathode and a graphene coated separator for a stable room-temperature aluminum–sulfur battery

Supplementary files

Article information

Article type
Paper
Submitted
06 9 2019
Accepted
19 11 2019
First published
20 11 2019

Sustainable Energy Fuels, 2020,4, 1630-1641

Design of a composite cathode and a graphene coated separator for a stable room-temperature aluminum–sulfur battery

X. Zheng, R. Tang, Y. Zhang, L. Ma, X. Wang, Y. Dong, G. Kong and L. Wei, Sustainable Energy Fuels, 2020, 4, 1630 DOI: 10.1039/C9SE00762H

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements