Issue 11, 2019

Ultrasensitive detection of aqueous Cu2+ ions by a coumarin-salicylidene based AIEgen

Abstract

This work reports the aggregation induced emission (AIE) behaviour of a coumarin-salicylidene Schiff base probe 3 which shows bright yellow AIE fluorescence in DMSO–water medium (fw 80%) buffered by 10 mM HEPES at pH 7.4. The aggregated probe (AIEgen-3) selectively discriminates Cu2+ ions over a series of other interfering metal ions via a fluorescence “on–off” strategy through a CHEQ process. DLS measurements revealed an average particle size of 372 nm for AIEgen-3 at an 80% water fraction, which dramatically increases to 656 nm in the presence of Cu2+ ions, indicating the formation of more structured aggregates, which was further supported by TEM and ESI-MS experiments. A comprehensive analysis of the binding characteristics and interference studies of AIEgen-3 with various metal ions have been carried out by fluorescence and UV-visible experiments. AIEgen-3 shows a fluorescence detection limit (LOD) of 24 nM (∼1.5 ppb) for Cu2+ ions, which is considerably far below the values of detection limits recently reported for other Cu2+ ion sensors in aqueous medium. Further, the analytical applications of AIEgen-3 have been demonstrated by the estimation of Cu2+ ions in tap water and pharmaceutical samples both in solution and the solid phase, which shows the potentiality of the probe for on-site detection of Cu2+ ions in chemical, environmental and biological samples.

Graphical abstract: Ultrasensitive detection of aqueous Cu2+ ions by a coumarin-salicylidene based AIEgen

Supplementary files

Article information

Article type
Research Article
Submitted
17 6 2019
Accepted
10 9 2019
First published
11 9 2019

Mater. Chem. Front., 2019,3, 2437-2447

Ultrasensitive detection of aqueous Cu2+ ions by a coumarin-salicylidene based AIEgen

S. K. Padhan, N. Murmu, S. Mahapatra, M. K. Dalai and S. N. Sahu, Mater. Chem. Front., 2019, 3, 2437 DOI: 10.1039/C9QM00394K

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements