Issue 44, 2022

Ultrawide-frequency electromagnetic-wave absorption based on FeCoNiCuxMn high entropy alloys synthesized through swing ball-milling

Abstract

FeCoNiCuxMn (x = 0, 0.1, 0.3, 0.5, 0.7 and 0.9) and FeCoNiCu0.1MnB0.05 high entropy alloys (HEAs) were prepared via an improved swing ball-milling method. The BCC structure and FCC structure coexisted in the HEAs, and the proportion of FCC structure presented an increasing tendency with the increase of Cu content. In terms of corrosion resistance, Cu segregation generated galvanic corrosion, and weakened the corrosion resistance. A small amount of Cu had little effect on the oxidation resistance at high temperatures, but when the Cu content was high (FeCoNiCu0.9Mn), the oxidation resistance of the alloys at 1000 °C was enhanced due to the formation of CuO protective layers. The introduction of boron reduced the oxidation rate and enhanced the initial oxidation temperature but weakened the corrosion resistance and impedance matching. The optimal reflection loss (RLmin) of FeCoNiCu0.1Mn reached −71.0 dB as thin as 2.93 mm, and the widest bandwidth was 6.79 GHz (7.75–14.54 GHz). This work has important significance for the exploration of practical EMA materials that are resistant to harsh environments.

Graphical abstract: Ultrawide-frequency electromagnetic-wave absorption based on FeCoNiCuxMn high entropy alloys synthesized through swing ball-milling

Supplementary files

Article information

Article type
Paper
Submitted
17 ៩ 2022
Accepted
20 ១០ 2022
First published
21 ១០ 2022

J. Mater. Chem. C, 2022,10, 16696-16705

Ultrawide-frequency electromagnetic-wave absorption based on FeCoNiCuxMn high entropy alloys synthesized through swing ball-milling

H. Zhou, L. Jiang, L. Jia, Z. Tang, L. Wang, A. Wu and X. Zhang, J. Mater. Chem. C, 2022, 10, 16696 DOI: 10.1039/D2TC03913C

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements