Issue 26, 2019

A highly conductive nanostructured PEDOT polymer confined into the mesoporous MIL-100(Fe)

Abstract

Despite the higher efficiency, larger color range and faster stimulus response of polymeric electrochromic materials, their poor cyclability strongly hampers their application in optoelectronics. As an original strategy to stabilize and further nanostructure these polymers, herein an efficient encapsulation and in situ polymerization inside highly porous metal–organic frameworks (MOFs) is reported. In particular, the successful accommodation of poly(3,4-ethylendioxythiophene) (PEDOT) and its partially oxidized polarons inside the mesopores of the nontoxic iron trimesate MIL-100(Fe) is convincingly proved by a large panel of experimental techniques. Remarkably, the polymer–MOF interaction occurring for entrapped PEDOT within the pores (deeply assessed by experimental and simulation methods) might be responsible for the enhanced electrical conductivity of the resulting PEDOT@MIL-100(Fe) composite when compared to the insulating MIL-100(Fe) and the conductive free PEDOT. Furthermore, it was possible to observe the electrochromic properties of the PEDOT@MIL-100(Fe) composite, achieving an improved stability and good cyclability as a consequence of the effective protection by the MOF matrix.

Graphical abstract: A highly conductive nanostructured PEDOT polymer confined into the mesoporous MIL-100(Fe)

Supplementary files

Article information

Article type
Paper
Submitted
01 ៣ 2019
Accepted
24 ៤ 2019
First published
24 ៤ 2019

Dalton Trans., 2019,48, 9807-9817

A highly conductive nanostructured PEDOT polymer confined into the mesoporous MIL-100(Fe)

P. Salcedo-Abraira, A. Santiago-Portillo, P. Atienzar, P. Bordet, F. Salles, N. Guillou, E. Elkaim, H. Garcia, S. Navalon and P. Horcajada, Dalton Trans., 2019, 48, 9807 DOI: 10.1039/C9DT00917E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements