Issue 4, 2019

Visualization of two-phase reacting flow behavior in a gas–liquid–solid microreactor

Abstract

The hydrodynamic characteristics of gas–liquid two-phase flow can significantly affect the performance of gas–liquid–solid microreactors. Using nitrobenzene hydrogenation as the reference heterogeneous catalytic reaction, the two-phase reacting flow behavior was visualized and characterized. Distinct differences in the length evolution, migration velocity and residence time of gas slugs were noticed for the reaction and non-reaction cases. The interface retraction of a gas slug was observed, which was mainly due to the hydrogen consumption at the gas pressure accumulation stage. Moreover, effects of the gas and liquid flow rates as well as the inlet nitrobenzene concentration on the two-phase flow behaviors and microreactor performance were also investigated. The results suggested that increasing the gas flow rate could enhance nitrobenzene conversion, but this effect was inhibited by the reduced residence time at high gas flow rates. Higher nitrobenzene concentration could enhance the interface retraction and extend the residence time, and together promote aniline production but in a trade-off with the conversion. This work reveals the intrinsic interaction between two-phase flow behaviors and catalytic reaction in microreactors, which can play a significant role in the development of microreactor technology.

Graphical abstract: Visualization of two-phase reacting flow behavior in a gas–liquid–solid microreactor

Supplementary files

Article information

Article type
Paper
Submitted
16 Қар. 2018
Accepted
17 Қаң. 2019
First published
21 Қаң. 2019

React. Chem. Eng., 2019,4, 715-723

Visualization of two-phase reacting flow behavior in a gas–liquid–solid microreactor

H. Feng, X. Zhu, B. Zhang, R. Chen, Q. Liao, D. Ye, J. Liu, M. Liu, G. Chen and K. Wang, React. Chem. Eng., 2019, 4, 715 DOI: 10.1039/C8RE00307F

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements