Issue 11, 2018

Tin–lead halide perovskites with improved thermal and air stability for efficient all-perovskite tandem solar cells

Abstract

We report the fabrication of monolithic all-perovskite tandem solar cells with a stabilized power conversion efficiency of 19.1% and demonstrate improved thermal, atmospheric, and operational stability of the tin–lead perovskite (FA0.75Cs0.25Sn0.5Pb0.5I3) used as the low gap absorber. To achieve a high matched current density in the two-terminal tandem, we develop a route to fabricate uniform and thick tin–lead perovskites that enable the two-terminal tandem to attain external quantum efficiencies >80% in the near infrared. By post-processing the as-deposited tin–lead perovskite films with methylammonium chloride vapor, we increase grain sizes to over a micron and boost solar cell open circuit voltage and fill factor. Tin–lead perovskite solar cells made by this method exhibit the most stable operation at maximum power under simulated sunlight of any reported small bandgap perovskite solar cell to date. We show that an unencapsulated tin–lead perovskite solar cell maintains its full performance after 150 hours at 85C in air, which is substantially better than has been observed previously. This work identifies strategies for attaining highly efficient all-perovskite tandem solar cells while maintaining thermal and operational stability.

Graphical abstract: Tin–lead halide perovskites with improved thermal and air stability for efficient all-perovskite tandem solar cells

Supplementary files

Article information

Article type
Paper
Submitted
01 Шіл. 2018
Accepted
06 Там. 2018
First published
07 Там. 2018

Sustainable Energy Fuels, 2018,2, 2450-2459

Author version available

Tin–lead halide perovskites with improved thermal and air stability for efficient all-perovskite tandem solar cells

T. Leijtens, R. Prasanna, K. A. Bush, G. E. Eperon, J. A. Raiford, A. Gold-Parker, E. J. Wolf, S. A. Swifter, C. C. Boyd, H. Wang, M. F. Toney, S. F. Bent and M. D. McGehee, Sustainable Energy Fuels, 2018, 2, 2450 DOI: 10.1039/C8SE00314A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements