Issue 43, 2017

A high tenacity electrode by assembly of a soft sorbent and a hard skeleton for lithium–sulfur batteries

Abstract

The volume expansion of a sulfur cathode can be accommodated by fabricating a composite structure with a soft (nitrogen-doped graphene) and a hard (silicon carbide whisker) material in lithium sulfur batteries. Due to trapping of soluble polysulfides by soft nitrogen-doped graphene and building a strong structure with a hard silicon carbide whisker, it delivered a high specific capacity of 1288 mA h g−1 at a current density of 335 mA g−1 and exhibited a capacity retention of more than 80% after 150 cycles.

Graphical abstract: A high tenacity electrode by assembly of a soft sorbent and a hard skeleton for lithium–sulfur batteries

Supplementary files

Article information

Article type
Communication
Submitted
10 Там. 2017
Accepted
04 Қыр. 2017
First published
04 Қыр. 2017

J. Mater. Chem. A, 2017,5, 22459-22464

A high tenacity electrode by assembly of a soft sorbent and a hard skeleton for lithium–sulfur batteries

X. Tang, Z. Sun, J. Liang, J. Zhao, H. Cheng, S. Zhuo and F. Li, J. Mater. Chem. A, 2017, 5, 22459 DOI: 10.1039/C7TA07063B

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements