Issue 48, 2016

Synthesis, molecular and photovoltaic/transistor properties of heptacyclic ladder-type di(thienobenzo)fluorene-based copolymers

Abstract

We present a facile synthesis method to make a new ladder-type heptacyclic dithienobenzofluorene (DTBF) framework, where the central 2,7-fluorene unit is covalently fastened with two external thiophenes via two C[double bond, length as m-dash]C bridges. A dieneyne-containing precursor undergoes DBU-induced double benzannulation to regiospecifically introduce two solubilizing 2-octyldodecyl side chains at 5,10-positions of DTBF. The rigid and coplanar Br-DTBF monomer with sufficient solubility was copolymerized with 5,6-difluoro-4,7-bis(5-(trimethylstannyl)thiophen-2-yl)benzo[c][1,2,5]thiadiazole (Sn-DTFBT) and 5,10-bis(5-(trimethylstannyl)thiophen-2-yl)naphtho[1,2-c:5,6-c′]bis([1,2,5]thiadiazole) (Sn-DTNT) via Stille coupling to furnish two donor–acceptor copolymers, PDTBFFBT and PDTBFNT, respectively. Their thermal, optical, electrochemical, molecular stacking and photovoltaic properties are investigated. PDTBFNT has a higher molecular weight, smaller optical and electrochemical band gaps, and stronger solid-state packing than PDTBFFBT. DFT calculations were carried out to gain insight into the electronic and structural properties of DTBF and its derivatives. Bulk heterojunction solar devices with the ITO/ZnO/polymers:PC71BM/MoO3/Ag configuration were fabricated. By adding 5 vol% diphenyl ether (DPE) as an additive, PDTBFNT:PC71BM and PDTBFFBT:PC71BM devices achieved the power conversion efficiencies of 5.22% and 2.68%, respectively. The superior efficiency of PDTBFNT over PDTBFFBT is attributed to the better LUMO energy alignment between PDTBFNT and PC71BM and the face-on π-stacking of PDTBFNT in the active layer. Moreover, PDTBFNT exhibited a higher field-effect transistor hole mobility of 1.90 × 10−2 cm2 V−1 s−1 than PDTBFFBT with a value of 3.96 × 10−3 cm2 V−1 s−1.

Graphical abstract: Synthesis, molecular and photovoltaic/transistor properties of heptacyclic ladder-type di(thienobenzo)fluorene-based copolymers

Supplementary files

Article information

Article type
Paper
Submitted
04 Қаз. 2016
Accepted
18 Қаз. 2016
First published
07 Қар. 2016

J. Mater. Chem. C, 2016,4, 11427-11435

Synthesis, molecular and photovoltaic/transistor properties of heptacyclic ladder-type di(thienobenzo)fluorene-based copolymers

C. Lee, Y. Lai, F. Cao, J. Hsu, Z. Lin, U. Jeng, C. Su and Y. Cheng, J. Mater. Chem. C, 2016, 4, 11427 DOI: 10.1039/C6TC04300C

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements