Issue 47, 2023

Superior energy storage performance and ultrafast discharge of NBBT-based ceramics via introducing linear dielectric additives and rare earth oxides

Abstract

Ferroelectric ceramics have low energy storage performance due to their nearly square hysteresis loops and low dielectric breakdown strength, which affects their practical applications for high-power energy storage capacitors. Therefore, we solve this problem by introducing a linear dielectric additive and rare earth oxide into Na0.5Bi0.5TiO3-based ceramics. The (1 − x)(0.94Na0.5Bi0.5TiO3–0.06BaTiO3)–xCa0.7Sm0.2TiO3 [(1 − x)NBBT–xCST] ceramics were designed and prepared by the conventional solid-state reaction method. The results show that the introduction of Ca0.7Sm0.2TiO3 can effectively inhibit the grain growth, optimize the relaxation behavior and improve the band gap, which are conducive to the simultaneous enhancement of energy storage density and efficiency. The reliability of the experimental results is also verified by finite element simulation (COMSOL). A high recoverable energy density (Wrec) of 5.1 J cm−3, a high efficiency (η) of 88% and an ultrafast discharge time of 28 ns were finally achieved in NBBT ceramics with x = 0.35. Notably, the sample exhibits superior thermal stability over a wide temperature range of 20–140 °C. These properties provide a new design approach for energy storage capacitors.

Graphical abstract: Superior energy storage performance and ultrafast discharge of NBBT-based ceramics via introducing linear dielectric additives and rare earth oxides

Article information

Article type
Paper
Submitted
25 Қыр. 2023
Accepted
01 Қар. 2023
First published
03 Қар. 2023

J. Mater. Chem. C, 2023,11, 16491-16500

Superior energy storage performance and ultrafast discharge of NBBT-based ceramics via introducing linear dielectric additives and rare earth oxides

P. Li, H. Yang, A. N. Kodagoda, Q. Yuan and Y. Lin, J. Mater. Chem. C, 2023, 11, 16491 DOI: 10.1039/D3TC03477A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements