Issue 3, 2022

Bulk and surface exsolution produces a variety of Fe-rich and Fe-depleted ellipsoidal nanostructures in La0.6Sr0.4FeO3 thin films

Abstract

The past several years have seen a resurgence in the popularity of metal exsolution as an approach to synthesize advanced materials proposed for novel catalytic, magnetic, optical, and electrochemical properties. Whereas most studies to-date have focused on surface exsolution (motivated by catalysis), we instead report on the diversity of nanostructures formed in La0.6Sr0.4FeO3 thin films during sub-surface or so-called ‘bulk’ exsolution, in addition to surface exsolution. Bulk exsolution is a promising approach to tuning the functionality of materials, yet there is little understanding of the nanostructures exsolved within the bulk and how they compare to those exsolved at gas–solid interfaces. This work combines atomic- and nano-scale imaging and spectroscopy techniques applied using a state-of-the-art aberration-corrected scanning transmission electron microscope (STEM). In doing so, we present a detailed atomic-resolution study of a range of Fe-rich and Fe-depleted nanostructures possible via exsolution, along with qualitative and quantitative chemical analysis of the exsolved nanostructures and oxide phases formed throughout the film. Local structural changes in the perovskite matrix, coinciding with nanostructure exsolution, are also characterized with atomic-resolution STEM imaging. Fe exsolution is shown to create local A-site rich domains of Ruddlesden–Popper phase, and some stages of this phase formation have been demonstrated in this work. In particular, phase boundaries are found to be the primary nucleation sites for bulk and surface exsolution, and the exsolved particles observed here tend to be ellipsoidal with shape factor of 1.4. We report a range of nanostructure types (core–shell, bulk core–shell, adjacent, and independent particles), revealing several possible avenues of future exploration aimed to understand the formation mechanism of each exsolution type and to develop their functionality. This work is thus relevant to materials scientists and engineers motivated to understand and utilize exsolution to synthesize materials with predictable nanostructures.

Graphical abstract: Bulk and surface exsolution produces a variety of Fe-rich and Fe-depleted ellipsoidal nanostructures in La0.6Sr0.4FeO3 thin films

Supplementary files

Article information

Article type
Paper
Submitted
17 Қыр. 2021
Accepted
30 Қар. 2021
First published
07 Жел. 2021

Nanoscale, 2022,14, 663-674

Author version available

Bulk and surface exsolution produces a variety of Fe-rich and Fe-depleted ellipsoidal nanostructures in La0.6Sr0.4FeO3 thin films

K. Syed, J. Wang, B. Yildiz and W. J. Bowman, Nanoscale, 2022, 14, 663 DOI: 10.1039/D1NR06121F

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements