Issue 4, 2021

Effects of the thickness and laser irradiation on the electrical properties of e-beam evaporated 2D bismuth

Abstract

Two-dimensional (2D) bismuth is expected to yield exotic electrical properties for various nanoelectronics, despite the difficulty in large-area preparation and property tuning directly on a device substrate. This work reports electron beam (e-beam) evaporation of large-area 2D bismuth directly on SiO2/Si with an electrical conductivity of ∼105 S m−1 and a field effect carrier mobility of ∼235 cm2 V−1 s−1 at room temperature, comparable to those of the molecular beam epitaxy (MBE) counterparts with a similar thickness. Interestingly, the electrical conductivity of 2D bismuth changes when exposed to laser irradiation that possibly induced an increase of the defect concentration, indicating a potential photo-sensor application. The electrical response of 2D bismuth can be modified either by laser irradiation or by varying the layer thickness. Due to the dimension and surface state effects in 2D bismuth, the layer thickness has a strong influence on the carrier concentration and mobility. Inspiringly, a simultaneous increase of the electrical conductivity and the Seebeck coefficient was achieved in 2D bismuth, which is preferred for thermoelectric performance but rarely reported. Our results provided a more accessible platform than MBE to produce decent quality 2D bismuth and similar Xenes with tunable electrical properties for various nanoelectronics.

Graphical abstract: Effects of the thickness and laser irradiation on the electrical properties of e-beam evaporated 2D bismuth

Supplementary files

Article information

Article type
Paper
Submitted
20 Там. 2020
Accepted
31 Жел. 2020
First published
02 Қаң. 2021

Nanoscale, 2021,13, 2648-2657

Effects of the thickness and laser irradiation on the electrical properties of e-beam evaporated 2D bismuth

X. Sun, H. Zhao, J. Chen, W. Zhong, B. Zhu and L. Tao, Nanoscale, 2021, 13, 2648 DOI: 10.1039/D0NR06062C

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements