Issue 24, 2021

A novel Cr3+-doped Lu2CaMg2Si3O12 garnet phosphor with broadband emission for near-infrared applications

Abstract

Near-infrared (NIR) phosphor-converted light emitting diode (pc-LED) light sources have broad application prospects in environmental science, biomedical and plant growth fields. However, NIR phosphors still suffer from narrowband emission and low thermal stability. Here, we prepared a novel Lu2CaMg2−xSi3O12:xCr3+ (LCMS:xCr3+, x = 0.005–0.06) phosphor with broadband emission by a high-temperature solid state reaction. Under excitation at 450 nm, the emission spectrum of the LCMS:0.05Cr3+ phosphor shows a broadband emission in the range of 650–1000 nm with a large full width at half maximum (FWHM) of 125 nm and an R-line emission of 692 nm. In addition, the LCMS:0.05Cr3+ phosphor has good thermal stability and can maintain 70% emission intensity at 150 °C relative to that at room temperature. The LCMS:0.05Cr3+ phosphor exhibits a high internal quantum efficiency (IQE) of ∼76%. Using this phosphor, a NIR pc-LED with photoelectric efficiencies of 14.8% at 100 mA and 6.0% at 320 mA and NIR output powers of 59.5 mW at 100 mA and 181.0 mW at 320 mA was obtained. The broadband LCMS:0.05Cr3+ phosphor with a NIR emission peaked at 750 nm can serve as a light source for plant cultivation and has superior application prospects in the agriculture field.

Graphical abstract: A novel Cr3+-doped Lu2CaMg2Si3O12 garnet phosphor with broadband emission for near-infrared applications

Article information

Article type
Paper
Submitted
12 Сәу. 2021
Accepted
12 Мам. 2021
First published
12 Мам. 2021

Dalton Trans., 2021,50, 8446-8456

A novel Cr3+-doped Lu2CaMg2Si3O12 garnet phosphor with broadband emission for near-infrared applications

W. Nie, L. Yao, G. Chen, S. Wu, Z. Liao, L. Han and X. Ye, Dalton Trans., 2021, 50, 8446 DOI: 10.1039/D1DT01195B

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements