Issue 6, 2021

Enhanced photoluminescence and photocatalytic performance of a TiO2–ZnWO4 nanocomposite induced by oxygen vacancies

Abstract

Titanium dioxide (TiO2)–zinc tungstate (ZnWO4) nanocomposite powder was prepared by a sol–gel procedure. The X-ray diffraction pattern (XRD) of the nanocomposite indicates that the crystallinity of TiO2 is reduced by coupling with ZnWO4. High resolution microscopic observation of the nanocomposite reveals the intimate contacts formed between the TiO2–ZnWO4 interfaces. The composite’s structure slightly reduces the aggregation of the unmixed TiO2 and ZnWO4, leading to a larger surface area. The photoluminescence (PL) spectrum of the nanocomposite exhibits a prominent broad emission band centered at about 470 nm, compared with that of the pure ZnWO4. Gaussian fitting of the PL peak of the nanocomposite suggests a reduced number of oxygen defects on the ZnWO4 surface. This is further confirmed by X-ray photoelectron spectroscopy (XPS) analysis of the nanocomposite, and the number of oxygen defects on the surface of TiO2 is demonstrated to be increased by coupling with ZnWO4. The photocatalytic activity of the nanocomposite was evaluated by degrading methyl orange under UV light irradiation. The results showed that the photocatalytic performance of TiO2 is much improved through coupling with ZnWO4.

Graphical abstract: Enhanced photoluminescence and photocatalytic performance of a TiO2–ZnWO4 nanocomposite induced by oxygen vacancies

Article information

Article type
Paper
Submitted
13 Қаз. 2020
Accepted
20 Жел. 2020
First published
21 Жел. 2020

CrystEngComm, 2021,23, 1336-1344

Enhanced photoluminescence and photocatalytic performance of a TiO2–ZnWO4 nanocomposite induced by oxygen vacancies

H. Liu, X. Zhao, H. Shen, S. Hao and X. Jiang, CrystEngComm, 2021, 23, 1336 DOI: 10.1039/D0CE01500H

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements