Issue 31, 2020

Organic and quantum-dot hybrid white LEDs using a narrow bandwidth blue TADF emitter

Abstract

White electroluminescence is of particular importance for high resolution full-color flexible displays which use a down-conversion scheme to generate individual red, green and blue emissions from color filters. Quantum dot (QD) light emitting diodes possess ultrahigh brightness and considerably narrow full-width-half-maximum (FWHM) spectra. Nevertheless, inefficient blue QDs limit the overall device performances. Herein, we introduced a boron-based blue thermally activated delayed fluorescent compound and utilized the host–guest system to construct solution-processed white devices. Red and green QDs combined with the blue emitter enable a feasible design of the flexible white devices with sharp peaks and thus intrinsically wide color gamuts. The proof-of-concept hybrid white devices with a single emissive layer exhibited external quantum efficiencies of 6.9% (on a rigid substrate) and 2.3% (on a flexible substrate). The color mixing effect and energy transfer among the lumophores were exemplified with three sharp peaks at around 464, 538 and 622 nm, respectively accompanied with the corresponding FWHM of 30, 34 and 31 nm of each component.

Graphical abstract: Organic and quantum-dot hybrid white LEDs using a narrow bandwidth blue TADF emitter

Supplementary files

Article information

Article type
Paper
Submitted
21 Сәу. 2020
Accepted
24 Сәу. 2020
First published
24 Сәу. 2020

J. Mater. Chem. C, 2020,8, 10831-10836

Organic and quantum-dot hybrid white LEDs using a narrow bandwidth blue TADF emitter

Y. Tang, G. Xie, X. Liang, Y. Zheng and C. Yang, J. Mater. Chem. C, 2020, 8, 10831 DOI: 10.1039/D0TC01942A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements