Issue 9, 2020

Tunneling-induced negative permittivity in Ni/MnO nanocomposites by a bio-gel derived strategy

Abstract

One-dimensional wires are the most common building blocks in metamaterials. In this study, zero-dimensional nanoparticles connected by tunneling networks were used to construct metamaterials, thus providing a more flexible alternative for designing the geometrical configuration of metamaterials, particularly in nanodevices. The composites with nickel nanoparticles@MnO were prepared by a bio-gel derived strategy. Nickel nanoparticles were not connected geometrically, but the conductive network had been already formed, which was a tunneling-dominated percolative phenomenon demonstrated by the first-principles calculation. Negative permittivity was achieved in the composites, as the low-frequency plasmonic state could be generated in the tunneling nickel-networks. At the same time, negative susceptibility was observed due to the diamagnetism of the tunneling current loops. Electromagnetic simulations indicate that the composites have the potential for electromagnetic shielding (only 0.25 mm in thickness). It is believed that this study not only fills up the research gap in the influence of the tunneling effect on negative electromagnetic parameters but also opens up another way of preparing metamaterials by using zero-dimensional nanoparticles instead of one-dimensional wires.

Graphical abstract: Tunneling-induced negative permittivity in Ni/MnO nanocomposites by a bio-gel derived strategy

Supplementary files

Article information

Article type
Paper
Submitted
20 Қар. 2019
Accepted
03 Қаң. 2020
First published
06 Қаң. 2020

J. Mater. Chem. C, 2020,8, 3029-3039

Tunneling-induced negative permittivity in Ni/MnO nanocomposites by a bio-gel derived strategy

P. Xie, Y. Li, Q. Hou, K. Sui, C. Liu, X. Fu, J. Zhang, V. Murugadoss, J. Fan, Y. Wang, R. Fan and Z. Guo, J. Mater. Chem. C, 2020, 8, 3029 DOI: 10.1039/C9TC06378A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements