Issue 41, 2020

Preparation of periodic mesoporous organosilica with large mesopores using silica colloidal crystals as templates

Abstract

Organosiloxane-based mesoporous materials with periodically ordered pores (periodic mesoporous organosilica, PMO) have many applications due to their various organic functions, high surface areas, and large pore volumes. Conventional methods using surfactant templates (soft templates) are limited in terms of the diversity of organosilane precursors and precise control over the pore size in a relatively large mesopore region (10–50 nm). This paper demonstrates the preparation of PMOs with precisely controlled pore sizes (>10 nm in diameter) and various organosiloxane frameworks, using colloidal crystals of monodisperse silica nanospheres as a template. An inverse opal structure with interconnected spherical mesopores was obtained through polycondensation of hydrolyzed organoalkoxysilanes [(EtO)3Si-R-Si(OEt)3, R = C2H4, CH[double bond, length as m-dash]CH, and C6H4; PhSi(OEt)3], within the voids of silica colloidal crystals, followed by the preferential dissolution of silica under well-controlled basic conditions. The pore size varied depending on the size of the silica nanospheres. The versatility of this method will allow for the wide tuning of the physical and chemical properties of organosiloxane-based mesoporous materials.

Graphical abstract: Preparation of periodic mesoporous organosilica with large mesopores using silica colloidal crystals as templates

Supplementary files

Article information

Article type
Paper
Submitted
18 Мам. 2020
Accepted
21 Шіл. 2020
First published
21 Шіл. 2020

Nanoscale, 2020,12, 21155-21164

Preparation of periodic mesoporous organosilica with large mesopores using silica colloidal crystals as templates

N. Muramoto, T. Sugiyama, T. Matsuno, H. Wada, K. Kuroda and A. Shimojima, Nanoscale, 2020, 12, 21155 DOI: 10.1039/D0NR03837G

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements