Issue 9, 2020

Crystalline Al2O3 modified porous poly(aryl ether ketone) (PAEK) composite separators for high performance lithium-ion batteries via an electrospinning technique

Abstract

The thermostability and wettability of a separator play key roles in improving the safety and electrochemical properties of lithium-ion batteries (LIBs). Given this fact, a crystalline aluminium oxide (Al2O3) nanoparticle coated poly(aryl ether ketone) (PAEK) composite membrane with excellent comprehensive properties was fabricated by an electrospinning technique, and further used as a porous separator for high-performance lithium-ion batteries (LIBs). The structure, thermal stability, morphology, liquid electrolyte uptake, porosity, contact angle, ionic conductivity and electrochemical performance of the PAEK–Al2O3 blend separator were investigated. Notably, the PAEK–Al2O3 separator showed much stronger anti-shrinkage properties (no dimensional changes) than a commercial polypropylene (PP) separator (severe thermal shrinkage) at 150 °C over 1 h. In addition, compared with those of PAEK and commercial PP separators, the degradation temperatures of the PAEK–Al2O3 separator were higher, with values over 500 °C. The PAEK–Al2O3 separator also had superior electrolyte wettability, and its electrolyte uptake reached 561%. The porosity and ionic conductivity of the composite separator were 89.4% and 3.15 mS cm−1, respectively. As a result of the abovementioned outstanding properties of the blend separator, the cell assembled from the PAEK–Al2O3 separator exhibited a high discharge capacity of 158.2 mA h g−1 (LiFePO4/Li+) during 100 cycles and a superior C rate performance. Hence, the obtained PAEK–Al2O3 separator enhanced the safety and electrochemical properties of the corresponding LIB.

Graphical abstract: Crystalline Al2O3 modified porous poly(aryl ether ketone) (PAEK) composite separators for high performance lithium-ion batteries via an electrospinning technique

Supplementary files

Article information

Article type
Paper
Submitted
02 Қаз. 2019
Accepted
14 Жел. 2019
First published
16 Жел. 2019

CrystEngComm, 2020,22, 1577-1585

Crystalline Al2O3 modified porous poly(aryl ether ketone) (PAEK) composite separators for high performance lithium-ion batteries via an electrospinning technique

H. Li, D. Luo, J. He, F. Lin, H. Wang, L. Yu, W. Liu and J. Li, CrystEngComm, 2020, 22, 1577 DOI: 10.1039/C9CE01557D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements