Issue 2, 2019

Single-step catalytic conversion of furfural to 2-pentanol over bimetallic Co–Cu catalysts

Abstract

The conversion of biomass derived furfural to 2-pentanol, a useful organic solvent and precursor for various types of fuels, was demonstrated with ∼71.1% yield in a single step over a Co–Cu/Al2O3 catalyst at 240 °C and 45 bar H2 pressure. The catalyst demonstrated sustained activity and selectivity for four subsequent recycles without regeneration. Co was proposed as the primary active site that enabled hydrodeoxygenation of furfural to produce methyl furan followed by ring opening, while Cu mitigated product degradation that occurred on pure Cu catalysts.

Graphical abstract: Single-step catalytic conversion of furfural to 2-pentanol over bimetallic Co–Cu catalysts

Supplementary files

Article information

Article type
Communication
Submitted
05 Қыр. 2018
Accepted
05 Қаз. 2018
First published
10 Қаз. 2018

React. Chem. Eng., 2019,4, 261-267

Author version available

Single-step catalytic conversion of furfural to 2-pentanol over bimetallic Co–Cu catalysts

B. Seemala, R. Kumar, C. M. Cai, C. E. Wyman and P. Christopher, React. Chem. Eng., 2019, 4, 261 DOI: 10.1039/C8RE00195B

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements