Issue 41, 2019

3D hybrid networks of gold nanoparticles: mechanoresponsive electrical humidity sensors with on-demand performances

Abstract

We have engineered macroscopic 3D porous networks of gold nanoparticles (AuNPs) chemically interconnected by di-thiolated ethylene glycol oligomers. The formation of such superstructures has been followed by means of UV-Vis spectroscopy by monitoring the aggregation-dependent plasmonic band of such nanomaterials. The controlled chemical tethering of the AuNPs with di-thiolated linkers possessing a well-defined contour length rules the interparticle distance. The use of ad-hoc linkers ensures charge transport via direct tunneling and the hygroscopic nature of the ethylene glycol backbone allows interaction with moisture. Upon interaction with water molecules from the atmosphere, our 3D networks undergo swelling reducing the tunnelling current passing through the system. By exploiting such a behavior, we have devised a new approach for the fabrication of electrical resistive humidity sensors. For the first time we have also introduced a new strategy to fabricate stable and robust devices by covalently attaching our 3D networks to gold electrodes. Devices comprising both 4 (TEG) or 6 (HEG) ethylene glycol repetitive units combined with AuNPs exhibited (i) unprecedentedly high response speed (∼26 ms), (ii) short recovery time (∼250 ms) in the absence of any hysteresis effect, and (iii) a linear response to humidity changes characterized by a highest sensitivity of 51 kΩ per RH(%) for HEG- and 500 Ω per RH(%) for TEG-based devices. The employed green solution processing in water and the extreme robustness of our 3D networks make them interesting candidates for the fabrication of sensors which can operate under extreme conditions and for countless cycles.

Graphical abstract: 3D hybrid networks of gold nanoparticles: mechanoresponsive electrical humidity sensors with on-demand performances

Supplementary files

Article information

Article type
Paper
Submitted
24 Мау. 2019
Accepted
14 Там. 2019
First published
15 Там. 2019

Nanoscale, 2019,11, 19319-19326

3D hybrid networks of gold nanoparticles: mechanoresponsive electrical humidity sensors with on-demand performances

M. A. Squillaci, M. Stoeckel and P. Samorì, Nanoscale, 2019, 11, 19319 DOI: 10.1039/C9NR05336K

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements