Issue 26, 2018

Fast two-step deposition of perovskite via mediator extraction treatment for large-area, high-performance perovskite solar cells

Abstract

As the efficiency of perovskite solar cells (PSCs) reached more than 22%, the large-area fabrication of PSCs became another issue receiving growing attention. For large-area PSCs, more reproducibility is required to precisely control the crystallization behavior of perovskites. A two-step process has been preferred to apply large-area coatings of perovskite because of its better reproducibility, but the process has suffered from slow and incomplete conversion of PbI2 to perovskite. In this paper, we propose a fast, simple, two-step method—mediator extraction treatment (MET)—for the preparation of a high-quality perovskite film. In MET, a pre-deposited PbI2–DMSO complex film is converted into a peculiar PbI2 film with a porous morphology and unusual crystallographic orientation via the removal of DMSO. PbI2 could be completely converted into MAPbI3 by a fast reaction with MAI molecules. We demonstrate that this MET process in MAPbI3-based PSCs can achieve 18.8% of the maximum power conversion efficiency (PCE) using spin-coating, and 18.3% of the maximum PCE using slot-die coating with a uniform distribution in a 10 ×10 cm2 substrate at a laboratory scale. Moreover, over 18% of PCE could be achieved in only 100 s, and with room-temperature processing.

Graphical abstract: Fast two-step deposition of perovskite via mediator extraction treatment for large-area, high-performance perovskite solar cells

Supplementary files

Article information

Article type
Paper
Submitted
28 Нау. 2018
Accepted
01 Мау. 2018
First published
04 Мау. 2018

J. Mater. Chem. A, 2018,6, 12447-12454

Fast two-step deposition of perovskite via mediator extraction treatment for large-area, high-performance perovskite solar cells

Y. Y. Kim, E. Y. Park, T. Yang, J. H. Noh, T. J. Shin, N. J. Jeon and J. Seo, J. Mater. Chem. A, 2018, 6, 12447 DOI: 10.1039/C8TA02868K

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements